Spin-stabilized satellite magnetic attitude control scheme without initial detumbling

The angular motion of an axisymmetrical satellite equipped with an active magnetic attitude control system is considered. The dynamics of the satellite are analytically studied on the whole control loop. The control loop is as follows: preliminary reorientation along with nutation damping, spinning about the axis of symmetry, then precise reorientation of the axis of symmetry in inertial space. Reorientation starts right after separation from the launch vehicle. Active magnetic attitude control system time-response with respect to its parameters is analyzed. It is proven that low-inclined orbit forces low control system time-response. Comparison with the common control scheme shows the time-response gain. Numerical analysis of the disturbances effect is carried out and good pointing accuracy is proved.     

A lunar cargo mission design strategy using variable low thrust

A design technique for a near optimal, Earth–Moon transfer trajectory using continuous variable low thrust is proposed. For the Earth–Moon transfer trajectory, analytical and numerical methods are combined to formulate the trajectory optimization problem. The basic concept of the proposed technique is to utilize analytically optimized solutions when the spacecraft is flying near a central body where the transfer trajectories are nearly circular shaped, and to use a numerical optimization method to match the spacecraft’s states to establish a final near optimal trajectory. The plasma thruster is considered as the main propulsion system which is currently being developed for crewed/cargo missions for interplanetary flight. The gravitational effects of the 3rd body and geopotential effects are included during the trajectory optimization process. With the proposed design technique, Earth–Moon transfer trajectory is successfully designed with the plasma thruster having a thrust direction sequence of “fixed-varied-fixed” and a thrust acceleration sequence of “constant-variable-constant”. As this strategy has the characteristics of a lesser computational load, little sensitivity to initial conditions, and obtaining solutions quickly, this method can be utilized in the initial scoping studies for mission design and analysis. Additionally, derived near optimal trajectory solution can be used as for initial trajectory solution for further detailed optimization problem. The demonstrated results will give various insights into future lunar cargo trajectories using plasma thrusters with continuous variable low thrust, establishing approximate costs as well as trajectory characteristics.     

歼击机平台发射弹道导弹攻击卫星技术

对歼击机平台发射弹道导弹攻击卫星作战模式与关键技术进行介绍、分析,强调在现阶段使用机载弹道导弹攻击卫星可行、合理.      

DBV-RCS中一种提高时延性能的时隙分配方法(英文)

在DVB-RCS卫星通信中,为某个业务分配的时隙在MF-TDMA帧中的位置分布将影响该业务的时延特性。本文分别针对固定速率和实时可变速率业务,对MF-TDMA的帧长度、终端分配的时隙数量及位置分布与业务时延性能之间的关系进行了建模分析。理论分析表明时隙位置是影响业务时延的一个重要因素,位置分布越均匀,越能提高业务的时延性能;时隙均匀分配相比传统的时隙连续分配可以有效降低业务平均时延,且时延不随帧长的变化而变化;在时隙均匀分配方式下,提高实时可变速率业务的带宽分配可以更有效的提高时延性能。在DVB-RCS标准基础上,提出了一种与标准完全兼容的时隙均匀分配方法(TUAM),通过计算机仿真验证了算法的有效性以及建模分析的正确性,该算法可有效地保证业务具有极低的平均时延和时延抖动,使得VoIP等实时业务不会由于端到端时延过大而丢包,提高了DVB-RCS系统对于实时业务QoS的保障能力。     

German SIMBOX on Chinese mission Shenzhou-8: Europe's first bilateral cooperation utilizing China's Shenzhou programme

On November 1, 2011, at 05:58 local time, the Chinese spaceship Shenzhou-8 was launched for a 17-day mission with a Long March rocket from the Jiuquan Satellite Launch Center in the Mongolia desert. On board was the German SIMBOX (Science in Microgravity Box) experimental facility containing 17 bio-medical experiments, which were conducted by German researchers together with their Chinese colleagues. It was the first time that China cooperated with a European nation in the scientific utilization of Shenzhou – the core element of China's human spaceflight programme.     

基于全球网和区域网SLR数据的低轨卫星定轨精度分析

卫星激光测距(SLR)是目前低轨卫星常用的定轨手段之一.文章以贾森-1(Jason-1)和"环境卫星"(EN VISAT)实测数据为例,讨论了不同弧段长度(1天、3天和7天)的全球网SLR数据对低轨卫星定轨精度的影响,分析了基于美国网、欧洲网和亚洲网等区域网SLR数据的低轨卫星精密定轨精度.检验定轨精度的参考轨道来自美...     

浅论无人机机载卫通天线尺寸与数字信号传输带宽关系

卫星通信是无人机中继通信的重要手段。本文对无人机卫星通信链路中飞机总体设计关注的机载卫通天线尺寸选择问题进行了较详细的计算、探讨。     

An object-level strategy for pan-sharpening quality assessment of high-resolution satellite imagery

Current satellite imaging systems offer a trade-off between high spatial and high spectral resolution providing panchromatic images at a higher spatial resolution and multispectral images at a lower spatial resolution but rich in spectral information while a wide range of applications need the highest level of this information, simultaneously. Image fusion techniques as means of enhancing the information content of initial panchromatic and multispectral images produce new images, titled pan-sharpened, which inherent the advantages of the initial images. Considering the impact of fusion accuracy on the quality of corresponding applications, it is necessary to evaluate the quality of these processed images. During the last decade, a lot of quality evaluation metrics have been proposed which are mostly inspired by traditional image quality metrics. These methods are mostly based on applying quality metrics at the pixel level and evaluating final quality value based on averaging of obtained metric values through the whole image. However, obtained results clearly show that the behaviour of image fusion quality is inconsistent amongst different image objects. In this article, by applying image fusion quality metrics (IFQMs) to image objects, an object-level strategy for quality assessment of the image fusion process is proposed. The proposed strategy is applied to different satellite imagery covering residential and agricultural areas. Experimental results show higher capabilities of object-level quality assessment strategy in the quality assessment of the fusion process. Evaluating fusion quality at the object level provides the potential of fusion quality assessment for each individual image object in compliance with different parameters such as the type of objects and the effective size of objects in data set.     

基于单参数迭代的TAEM在线轨迹生成方法

针对大升力体轨道再入飞行器末端能量管理（TAEM）段制导控制能力强、末端约束不惟一的问题，将TAEM段分为动压跟踪和着陆预备2个阶段，设计了不同的纵向轨迹剖面，从而将TAEM段在线轨迹生成问题转化为单参数搜索问题。第1阶段设计标称动压剖面为纵向参考轨迹，使得飞行器过程约束得到保证。第2阶段纵向剖面设计为标称高度剖面，从而使得末端点高度和倾角约束得到保证。根据末端动压误差设计修正律，迭代修正第一阶段动压剖面，从而使得最终的纵向轨迹满足所有的状态约束。在线轨迹递推采用以时间为自变量的数值积分，递推过程引入闭环制导律，通过实时修正攻角跟踪纵向剖面，修正倾侧角跟踪地面轨迹，从而保证在线生成的轨迹符合物理特性，降低闭环制导难度。在考虑初期再入末端大范围状态散布情况下，数值仿真显示了所提算法的鲁棒性。     

The future role of relay satellites for orbital telerobotics

Orbital robotics focuses on a variety of applications, as e.g. inspection and repair activities, spacecraft construction or orbit corrections. On-Orbit Servicing (OOS) activities have to be closely monitored by operators on ground. A direct contact to the spacecraft in Low Earth Orbit (LEO) is limiting the operational time of the robotic application. Therefore, geostationary satellites are desirable to relay the OOS signals and extend the servicing time window. A geostationary satellite in the communication chain not only introduces additional boundary conditions to the mission but also increases the time delay in the system. The latter is not very critical if the servicer satellite is operating autonomously. However, if the servicer is operating in a supervised control regime with a human in the loop, the increased time delay will have an impact on the operator’s task performance.