Evaluation of SARAL/AltiKa performance using GNSS/IMU equipped buoy in Sajafi,Imam Hassan and Kangan Ports

Performance of SARAL/AltiKa mission has been evaluated within 2016 altimeter calibration/validation framework in Persian Gulf through three campaigns conducted in the offshore waters of Sajafi, Imam Hassan and Kangan Ports, while the altimeter overflew the passes 470, 111 and 25 on 13 Feb, 7 March and 17 June 2016, respectively. As the preparation, a lightweight buoy was equipped with a GNSS receiver/choke-ring antenna and a MEMS-based IMU to measure independent datasets in the field operations. To obtain accurate sea surface height (SSH) time series, the offset of the onboard antenna from the equilibrium sea level was predetermined through surveying operations as the buoy was deploying in the onshore waters of Kangan Port. Accordingly, the double-difference carrier phase observations have been processed via the Bernese GPS Software v. 5.0 so as to provide the GNSS-derived time series at the comparison points of the calibration campaigns, once the disturbing effects due to the platform tilt and heave have been eliminated. Owing to comparing of the SSH time series and the associating altimetry 1?Hz GDR-T datasets, the calibration/validation of the SARAL/AltiKa has been performed in the both cases of radiometer and ECMWF wet troposphere corrections so as to identify potential land contamination. An agreement of the present findings in comparison with those attained in other international calibrations sites confirms the promising feasibility of Persian Gulf as a new dedicated site for calibration/validation of ongoing and future altimetry missions.     

Analysis and design of Cubesat constellation for the Mediterranean south costal monitoring against illegal immigration

Costal monitoring is focused on fast response to illegal immigration and illegal ship traffic. Especially, the illegal ship traffic has been present in media since April 2015, as the number of reported deaths of immigrants crossing the Mediterranean significantly increased. Satellite images provide a possibility to at least partially control both types of events. This paper defines the principal criteria to select the best satellite constellation architecture for maritime and coastal monitoring, filling the gaps of imagery techniques in term of real-time control. The primary purpose of a constellation is to obtain global measurement improving the temporal resolution. The small size and low-cost are the main factors, which make CubeSats ideal for use in constellations. We propose a constellation of 9 Cubesats distributed evenly in 3 different planes. This reduces the revisit time enhancing the coverage duration. In addition, it also allows observing fire, damage on building and similar disasters. In this analysis, the performance criteria were reported such as the revisit time, the vision duration and the area coverage.     

Statistical study of the time delay of ionospheric TEC storms to geomagnetic storms in Taoyuan,Taiwan

We have studied the time delay of ionospheric storms to geomagnetic storms at a low latitude station Taoyuan (25.02°N, 121.21°E), Taiwan using the Dst and TEC data during 126 geomagnetic storms from the year 2002 to 2014. In addition to the known local time dependence of the time delay, the statistics show that the time delay has significant seasonal characteristics, which can be explained within the framework of the seasonal characteristics of the ionospheric TEC. The data also show that there is no correlation between the time delay and the intensity of magnetic storms. As for the solar activity dependence of the time delay, the results show that there is no relationship between the time delay of positive storms and the solar activity, whereas the time delay of negative storms has weakly negative dependence on the solar activity, with correlation coefficient −0.41. Especially, there are two kinds of extreme events: pre-storm response events and long-time delay events. All of the pre-storm response events occurred during 15–20 LT, manifesting the Equator Ionospheric Anomaly (EIA) feature at Taoyuan. Moreover, the common features of the pre-storm response events suggest the storm sudden commencement (SSC) and weak geomagnetic disturbance before the main phase onset (MPO) of magnetic storms are two main possible causes of the pre-storm response events. By analyzing the geomagnetic indices during the events with long-time delay, we infer that this kind of events may not be caused by magnetic storms, and they might belong to ionospheric Q-disturbances.     

航天器近距离交会的固定时间终端滑模控制

针对航天器近距离交会段的位置姿态耦合控制问题，假设航天器受外界干扰且目标航天器存在空间自由翻滚情形时，基于固定时间概念设计了一种六自由度位姿终端滑模自适应控制器，通过引入显含正弦函数的切换项来避免奇异问题。此外所设计的控制器含双幂次项，不仅能全局提高姿态和位置的跟踪速度及精度，还能估计系统稳定所需的时间上界，且该上界与状态初始值无关。基于Lyapunov方法分析了闭环系统的固定时间稳定性。仿真结果表明，该控制器能快速实现对航天器近距离交会时相对位置和姿态的控制，具有较高的精度和良好的干扰抑制能力。     

基于开路电压法的电池荷电状态估计误差校正

本文提出分别研究电池开路电压在充电结束后停置过程和放电结束后停置过程的不同变化规律,并考虑了不同停置时间在两个过程中的作用和影响,从而达到提高开路电压法估算荷电状态精度的效果。实验验证表明,此方法的精度比传统开路电压法更加准确。     

月球表层采样样品智能确认方法

表层采样是月球采样探测的重要方式，样品智能确认有助于提升工作效率与复杂问题处理能力。结合月球表层采样铲挖工作过程，分析了铲挖过程中臂载相机图像的特点，模仿有人参与识别过程，提出了层次解耦的月球样品智能识别流程，利用深度学习方法构建了一类深度卷积识别网络，完整地描述了图像、特征、标记在网络中的正反传递关系，并在月球表层采样地面试验中进行了验证，结果表明该方法对不同光照、不同背景、不同过程、不同形态的样品，具有较好的泛化识别能力，误识别率优于8.1%，平均单幅识别时间约0.7 s。     

海洋大气环境下微动开关触点回跳时间增大故障的试验复现与分析

结合某型微动开关触点回跳时间增大导致某系统故障问题,设计了由干湿交替酸性盐雾试验和湿热试验组成的海洋大气环境效应加速模拟试验剖面,选取与外场故障件型号一致的微动开关为研究对象,通过实验室加速模拟试验,成功复现了外场故障现象,并结合试验结果对腐蚀性环境、电烧蚀等因素对触点回跳时间增大的影响机制进行了分析。     

Spatial transformation of general sampling-aliasing frequency region for rotating-blade parameter identification with emphasis on single-probe blade tip-timing measurement

Blade-health monitoring is intensely required for turbomachinery because of the high failure risk of rotating blades. Blade-Tip Timing (BTT) is considered as the most promising technique for operational blade-vibration monitoring, which obtains the parameters that characterize the blade condition from recorded signals. However, its application is hindered by severe undersampling and stringent probe layouts. An inappropriate probe layout can make most of the existing methods invalid or inaccurate. Additionally, a general conflict arises between the allowed and required layouts because of arrangement restrictions. For the sake of economy and safety, parameter identification based on fewer probes has been preferred by users. In this work, a spatial-transformation-based method for parameter identification is proposed based on a single-probe BTT measurement. To present the general Sampling-Aliasing Frequency (SAFE) map definition, the traditional time–frequency analysis methods are extended to a time-sampling frequency. Then, a SAFE map is projected onto a parameter space using spatial transformation to extract the slope and intercept parameters, which can be physically interpreted as an engine order and a natural frequency using coordinate transformation. Finally, the effectiveness and robustness of the proposed method are verified by simulations and experiments under uniformly and nonuniformly variable speed conditions.     

基于 Kriging与多点取样算法的压气机特性建模

针对航空燃气轮机流量系数插值建模过程中,获取样本数据时的实验成本较高以及插值模型精度偏低这 2个问题,根据样本点在设计空间中的分布与模型精度的关系,在 Kriging插值模型的基础上,采用把垂距作为设计变量取值标准的取样算法。首先,将样本点与相邻 2点之间连线的垂距与垂距阈值进行比较,筛选出符合条件的数据点,形成候选点集;其次,选用高斯函数判定基础点集和候选点集的相关性;最后,使用该算法筛选后的样本点构建 Kriging插值模型。实验结果表明,该方法使用的样本点为原来数量的 70%左右,并且预测精度得到了提高,该方法是有效可行的。     

一个DIS实时通讯网络的设计与实现

以一个ＤＩＳ（分布交互仿真）实时网络的设计和开发过程为背景,研究了ＤＩＳ实时网络开发中的几个问题。在进行实时ＤＩＳ网络规划时,采用了多点传送的通讯服务方式,保证每个仿真应用只发送变化的信息,只处理与自身相关的信息。指出了进行数据的实时传输格式定义时应注意的几个问题,这些数据定义必须支持多种不同的操作系统和平台。最后给出了开发ＤＩＳ实时通讯软件的方法,包括通讯协议和应用编程接口的选择。