门限自回归模型参数的局部正交设计寻优法

在采用点值图确定门限区间个数的基础上，对门自回归模型中门限值、滞后步长、各门限区间模型阶数，利用正交设计方法寻优，计算工作量锐减，却可得到精度较高的预报模型。     

基于Pro/E软件的卫星三维建模方法的探讨

主要对基于Pro/E软件的卫星三维建模和高效率、高可靠性、低成本的总装设计方法等进行了初步的研究和探讨。     

Spectroscopic Measurement of Coronal Compositions

Although the elemental composition in all parts of the solar photosphere appears to be the same this is clearly not the case with the solar upper atmosphere (SUA). Spectroscopic studies show that in the corona elemental composition along solar equatorial regions is usually different from polar regions; composition in quiet Sun regions is often different from coronal hole and active region compositions and the transition region composition is frequently different from the coronal composition along the same line of sight. In the following two issues are discussed. The first involves abundance ratios between the high-FIP O and Ne and the low-FIP Mg and Fe that are important for meaningful comparisons between photospheric and SUA compositions and the second involves a review of composition and time variability of SUA plasmas at heights of 1.0≤h≤1.5R _⊙.     

Ionospheric behavior of the F2 peak parameters foF2 and hmF2 at Hainan and comparisons with IRI model predictions

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with hourly time interval resolution for the diurnal variation, obtained with DPS-4 digisonde observations at Hainan (19.4°N, 109.0°E) are used to study the low latitude ionospheric variation behavior. The observational results are compared with the International Reference Ionospheric Model (IRI) predictions. The time period coverage of the data used for the present study is from March 2002 to February 2005. Our present study showed that: (1) In general, IRI predictions using CCIR and URSI coefficients follow well the diurnal and seasonal variation patterns of the experimental values of foF2. However, CCIR foF2 and URSI foF2 IRI predictions systematically underestimate the observed results during most time period of the day, with the percentage difference ΔfoF2 (%) values changing between about −5% and −25%, whereas for a few hours around pre-sunrise, the IRI predictions generally overestimate the observational ones with ΔfoF2 (%) sometimes reaching as large as ∼30%. The agreement between the IRI results and the observational ones is better for the year 2002 than for the other years. The best agreement between the IRI results and the observational ones is obtained in summer when using URSI coefficients, with the seasonal average values of ΔfoF2 (%) being within the limits of ±10%. (2) In general, the IRI predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the observational results. However, when using the measured M(3000)F2 as input, the diurnal variation pattern of hmF2 given by IRI2001 has a much better agreement with the observational one with the detailed fine structures including the pre-sunrise and post-sunset peaks reproduced reasonably well. The agreement between the IRI predicted hmF2 values using CCIR M(30,000)F2 option and the observational ones is worst for the afternoon to post-midnight hours for the high solar activity year 2002. During daytime hours the agreement between the hmF2 values obtained with CCIR M(30,000)F2 option and the observational ones is best for summer season. The discrepancy between the observational hmF2 and that obtained with CCIR M(30,000)F2 option stem from the CCIR M(3000)F2 model, which does not produce the small scale structures observed in the measured M(3000)F2.     

飞机主操纵系统疲劳试验载荷谱小操纵位移频次问题研究

针对飞机全机主操纵系统疲劳试验载荷谱中小操纵位移频次影响问题进行了分析和讨论,确定了某机全机主操纵系统小操纵位移频次的级别。同时,在原某机全机主操纵系统疲劳试验载荷谱的基础上再次对其小操纵位移频次进行了计算,去掉了这一级别以下对全机主操纵系统疲劳试验无影响的小操纵位移频次,从而完善了主操纵系统疲劳试验载荷谱。另外,对小操纵位移频次问题研究结果在其全机主操纵系统疲劳试验中的实施效果进行了阐述。     

Digital Aircraft Sheet Metal Part Manufacturing System and Its Key Technology

The architecture of digital sheet metal manufacturing system is proposed based on the classification of sheet metal manufacturing information.The essence of digital manufacturing is the definition,management and transfer of information,and the key technologies are brought forward and described.It is pointed out that knowledge-based manufacturing elements design is necessary to make digital technology efficient.The management of all kinds of sheet metal manufacturing element information is to build single source of manufacturing data.Multi-state model-based digital transfer and coordination method is designed to provide a foundation for digital manufacturing of aircraft sheet metal part.The application of digital sheet metal manufacturing is exemplified with an aircraft sheet metal part.The application result is compared to that of the traditional analog transfer technology.It is shown that the developed technology can improve part quality,shorten manufacturing time and lower manufacturing cost.     

对“ZY-1”FM1整星热平衡、热真空试验中有效载荷被污染情况的分析

介绍了卫星在热平衡试验后所发现的有效载荷的污染情况,通过对污染提取物的分析和试验设备的再次污染监测,找出了污染源,并对以后的防污染工作提供了借鉴.     

400kN振动台承力钢架的研制

文章中介绍的400kN 承力钢架是用来作船罩联合试验的承力机构,具有结构庞大、复杂的特点,对自振频率有一定要求,文章介绍了该设备研制过程中的设计、计算、加工及安装工艺技术等。     

离箱扰动和折叠翼展开数学模型研究

根据箱式发射导轨与导弹，导弹与折叠翼的约束特点，应用动力学普遍定理和解除约束原理，创建了离箱扰动运动数学模型和拆卸叠翼展开过程计算数学模型，并将计算结果与飞行试验结果作了比较。     

变轨发动机不等量截尾试验可靠度评估

对于可靠度要求极高和任务时间以小时计的变轨发动机来说，目前广泛采用以铌合金为材料并喷涂以抗高温氧化涂层方案的推力室，这一类发动机在方案试验阶段结束后的研制试验中往往只出现截尾试验的结果。给出了不等量截尾试验结果的可靠度评估方案。