M数缩尺法旋翼颤振动力相似模型设计

本文以延-2复合材料桨叶旋翼为例,用M数缩尺法尝试设计了缩尺比为1/5的颤振相似模型。设计从旋翼颤振微分方程开始,应用π定理得出10个独立相似准则数,列出各有关物理量缩尺因子后进行模型结构设计,从而得出了若干有益的结论。     

飞机碱性电瓶最佳充电方式研究及其实现

应用电瓶最佳受电原理，对常用飞机碱性电瓶的充电方式进行了分析和比较，提出了脉冲恒流二阶段充电法是电瓶的最佳充电方法之一的设想，其可行性已被试验证实。利用该充电方法，研制成了飞机碱性电瓶专用充电器．实验结果表明该充电方法能大大提高电瓶的充电效率，延长电瓶的使用寿命。     

Lift coefficient prediction at high angle of attack using recurrent neural network

In this paper, identification of dynamic stall effect of rotor blade is considered. Recurrent Neural Networks have the ability to identify the nonlinear dynamical systems from training data. This paper describes the use of recurrent neural networks for predicting the coefficient of lift (C_Z) at high angle of attack. In our approach, the coefficient of lift (C_Z) obtained from the experimental results (wind tunnel data) at different mean angle of attack θ_mean is used to train the recurrent neural network. Then the recurrent neural network prediction is compared with experimental ONERA OA212 airfoil data. The time and space complexity required to predict C_Z in the proposed method is less and it is easy to incorporate in any commercially available rotor code.     

Numerical study on flow fields and aerodynamics of tilt rotor aircraft in conversion mode based on embedded grid and actuator model

A method combining rotor actuator disk model and embedded grid technique is presented in this paper, aimed at predicting the flow fields and aerodynamic characteristics of tilt rotor aircraft in conversion mode more efficiently and effectively. In this method, rotor's influence is considered in terms of the momentum it impacts to the fluid around it; transformation matrixes among different coordinate systems are deduced to extend actuator method's utility to conversion mode flow fields' calculation. Meanwhile, an embedded grid system is designed, in which grids generated around fuselage and actuator disk are regarded as background grid and minor grid respectively, and a new method is presented for ‘donor searching' and ‘hole cutting' during grid assembling. Based on the above methods, flow fields of tilt rotor aircraft in conversion mode are simulated, with threedimensional Navier–Stokes equations discretized by a second-order upwind finite-volume scheme and an implicit lower–upper symmetric Gauss–Seidel(LU-SGS) time-stepping scheme. Numerical results demonstrate that the proposed CFD method is very effective in simulating the conversion mode flow fields of tilt rotor aircraft.     

转子-支承耦合结构的模型修正研究

在转子-支承耦合结构的动力学分析过程中,结构模态参数计算结果与实验测试结果往往存在较大差异。针对此问题,应用优化算法对结构动力学模型进行修正,使计算模型能更准确地反映结构特性。建立由梁单元、盘单元、弹性支承单元组成的结构动力学有限元模型;选择优化目标函数、设计参数,并对各参数进行灵敏度分析。应用粒子群算法对选取的设计参数进行优化,得到最优模型。利用转子-滚动轴承实验器进行验证,结果表明,方法能够有效地实现转子-支承耦合结构的动力学模型修正,修正后模型更接近实际结构。     

基于转子初始不平衡量控制的整机振动排故方法

针对某型航空发动机试车低压振动超限问题,结合发动机的结构特点,进行了故障分析。通过改进转子的平衡工艺,提出了控制转子初始不平衡量从而抑制发动机临界转速振动大的排故方法,再次试车时发现振动水平良好。结果表明排故方法有效,对今后发动机装配和整机振动排故具有重要的参考价值。     

高分辨率电流频率转换电路设计

随着惯性技术的发展,对电流频率转换电路的分辨率要求越来越高,以往常用的I/F转换电路已经不能满足要求,本文在传统电路的基础上结合FPGA和DSP提出了一种电路设计思路来提高分辨率.设计了硬件电路和软件电路.根据大量的试验数据分析,此改进电路在不损失电流频率转换电路线性度和稳定性的精度下,把电路的分辨率提高了一个数量级,解决了高精度电流频率转换电路分辨率低的问题,进一步扩大了电流频率转换电路的使用范围.     

RTTB—3型旋转力矩试验台测量技术探讨

RTTB-3型旋转为矩试验台是一种对电机进行自动测试并记录测试数据的设备。在实际使用该型试验台测试正常航空电机性能中，发现该型试验台在设计上没有考虑加载时冲击电流的影响，使记录的被测电机性能数据曲线有误差。探讨了RTTB-3型旋转为矩试验台在加载时对冲击电流的处理方法，以及实际使用此方法测试电动机扭矩技术。     

ANALYSIS OF AN ELECTROSTRICTIVE STACK ACTUATOR FOR ACTIVE TRAILING EDGE FLAPS

Helicopter is a complex dynamic system withmany rotating components. The rotor blades oper-ate in a highly complex aerodynamic environment.The vibratory hub load,which is caused by cyclicvariation ofcentrifugaland aerodynamic load of therotating bladesin flight,is transmitted to the fuse-lage,resulting in serious vibration and noise of thestructure. It is one of the most important excitingsources in helicopters.There has long been a desire to reduce heli-copter vibration and to improve its per…     

波音737—200／300／500飞机尾部结构疲劳裂纹的探伤检查

波音系列飞机一定时间后，飞机尾部结构出现疲劳裂纹，需用涡轮检测法进行损伤检查。