基于高空气流特性的转子发动机进气系统建模与仿真

针对转子发动机进气量难以直接测量的问题,基于某型转子发动机进气系统特点分析,考虑高空气流特性对进气量的影响,建立了转子发动机进气系统均值模型,通过Matlab/Simulink仿真软件仿真得到不同海拔高度下的进气量脉谱图。仿真结果与试验数据对比分析表明:发动机进气流量及进气管压强的仿真结果与试验数据基本吻合;在节气门开度较大时,节气门开度的变化对进气流量的影响逐渐减弱;所建转子发动机进气模型精度高,可用于转子发动机进气量的仿真计算。     

自转旋翼的气动优势和稳定转速

旋翼机在正常飞行中和直升机在自转下滑时,其旋翼都处在自转状态。从建立自转旋翼的气动模型入手,通过与直升机正常工作状态下的旋翼的气动特性的对比,得出自转旋翼具有较好的气动环境和更高的效率;讨论了旋翼机的稳定转速与总距角、前飞速度以及桨盘迎角的关系,通过分析说明在设计旋翼机时,可选择一固定总距,使旋翼机在相当宽的飞行范围内,只需小幅度调整桨盘迎角就可保持稳定飞行。     

基于C8051F020的绞车键盘模拟训练系统的设计与实现

为方便声纳员进行操作训练,设计、开发了一种能够脱离实装设备的吊放声纳绞车键盘模拟训练系统,绞车键盘操作的画面布局及键盘布局等与实装绞车键盘一致。同时,绞车键盘通过控制变频器带动电机以驱动绞车,可以逼真地模拟实际对绞车的操作,模拟也可以对特定条件下的训练方案进行设定,以提高声纳操作人员的训练水平。     

Leading-edge flow separation control over an airfoil using a symmetrical dielectric barrier discharge plasma actuator

In order to promote an in-depth understanding of the mechanism of leading-edge flow separation control over an airfoil using a symmetrical Dielectric Barrier Discharge(DBD) plasma actuator excited by a steady-mode excitation, an experimental investigation of an SC(2)-0714 supercritical airfoil with a symmetrical DBD plasma actuator was performed in a closed chamber and a low-speed wind tunnel. The plasma actuator was mounted at the leading edge of the airfoil.Time-resolved Particle Image Velocimetry(PIV) results of the near-wall region in quiescent air suggested that the symmetrical DBD plasma actuator could induce some coherent structures in the separated shear layer, and these structures were linked to a dominant frequency of f0= 39 Hz when the peak-to-peak voltage of the plasma actuator was 9.8 kV. In addition, an analysis of flow structures without and with plasma actuation around the upper side of the airfoil at an angle of attack of18° for a wind speed of 3 m/s(Reynolds number Re = 20000) indicated that the dynamic process of leading-edge flow separation control over an airfoil could be divided into three stages. Initially, this plasma actuator could reinforce the shedding vortices in the separated shear layer. Then, these vortical structures could deflect the separated flow towards the wall by promoting the mixing between the outside flow with a high kinetic energy and the flow near the surface. After that, the plasma actuator induced a series of rolling vortices in the vicinity of the suction side of the airfoil, and these vortical structures could transfer momentum from the leading edge of the airfoil to the separated region, resulting in a reattachment of the separated flow around the airfoil.     

Modeling and control of a novel electro-hydrostatic actuator with adaptive pump displacement

The variable pump displacement and variable motor speed electro-hydrostatic actuator (EHA), one of the three types of EHAs, has advantages such as short response time, flexible speed regulation, and high efficiency. However, the nonlinearity of its double-input single-output system poses a great challenge for system control. This study proposes a novel EHA with adaptive pump displacement and variable motor speed (EHA-APVM). A closed-loop position is realized using a servomotor. Moreover, the displacement varies with the system pressure; thus, the EHA-APVM is a single-input and single-output system. Firstly, the working principles of the EHA-APVM and the pump used in the system are introduced. Secondly, a nonlinear mathematical model of the proposed EHA-APVM control system is established, and a feedback back-stepping (FBBS) control algorithm is introduced to transform the complex nonlinear system into a linear system on the basis of the back-stepping control theory. Finally, simulation results prove that the EHA-APVM has a quick response and high robustness to variations of the load and the pump displacement. In this work, the size and weight of the motor are significantly reduced because the maximum power requirement is reduced, which is very beneficial for using the actuator in airborne equipment.     

执行器饱和的多智能体一致性控制

针对执行器饱和约束下的一类离散多智能体系统，设计了一种基于线性矩阵不等式的一致性控制律，并对线性矩阵不等式解的存在性进行了分析。由于饱和环节的影响，导致多智能体系统的一致性与个体的初始状态有关，不同的控制律所能允许的个体之间的初始偏差的范围不同。为了定量分析控制律所对应的初始偏差范围，引入吸引域的概念对所设计的控制律进行评估，并对控制律参数进行优化以扩大吸引域的范围。最后，通过数值仿真说明了所设计控制律的有效性。     

基于改进HHT的一体化电液作动器故障诊断

介绍了机载变排量变转速一体化电动静液作动器(EHA-VPVM,Electro-Hydrostatic Actuator with Variable Pump displacement and Variable Motor speed)的系统结构,根据EHA-VPVM早期故障信号非平稳、时变等特点,采用一种新的时频分析方法希尔伯特黄变换(HHT,Hilbert-Huang Transform)进行信号分析.针对HHT方法的模态混叠和虚假本征模态函数问题,提出两点改进:通过集合经验模式分解算法抑制模态混叠的发生;采用相关系数法保留真实本征模态函数.对EHA-VPVM工程样机进行早期故障诊断实验,用Hilbert边际谱和HHT谱分析永磁无刷直流电机两种工作状态下的振动信号.实验结果表明:改进HHT方法较好解决了HHT的模态混叠和虚假本征模态函数问题,能准确提取研究对象的早期故障特征,对EHA-VPVM早期故障具有良好的诊断效果.     

克服旋转飞行器螺旋运动的方法研究

旋转飞行器虽然具有内在稳定性，但在飞行过程中一些不确定因素会导致飞行器产生螺旋运动，而非理想的关于角动量矢量纯粹的旋转运动。结合旋转飞行器自身的特点，借鉴自旋卫生的被动章动阻尼的方法，提出了一种通过主动控制飞行器内部质量块的运动使得飞行器碑的惯量主轴发生偏移，惯量矩阵由原来的对称阵变为含有非零非对角元素的矩阵，从而改变飞行器的姿态角运动来克服螺旋运动的方法，这将有助于提高旋转飞行器的资态控制精度。以某型旋转飞行器为背景进行仿真研究，计算结果证实了该方法的有效性和可行性。     

基于Lab windows／CVI的电动舵机测试设备软件开发

基于Lab windows/CVI虚拟仪器开发平台,结合某飞控系统电动舵机自动测试设备的软件开发,介绍了数据库软件和功能模块软件应用的关键技术,并对软件的主要技术特点进行了分析.     

基于螺旋机构的旋转作动器研究

 研究出一种翼面驱动用旋转作动器。利用逆滚动螺旋机构将油缸的直线运动直接转换为旋转运动。研究表明,这种新作动器与现有作动器比较,具有输出力矩大,直径小,重量轻,标准化通用化的优点。