圆截面曲线管道内二次流动的Galerkin解

本文推导了曲线直角坐标系内的Ｎ－Ｓ方程。结果表明Ｇａｌｅｒｋｉｎ方法可以克服摄动法的小参数局限，得到了纯数值法无法求得的增 解析解。     

亚跨超CFD软件平台研制

亚跨ＣＦＤ软件平台研制的宗旨是综合国内外计算流体动力学的最新研究成果，用计算机软件技术的新发展，建立一个面向对象的计算流体动力学的研究开发环境，加快计算流体动力学最新成果向工程应用的转换速度。本文介绍初级版本的研究进展和研究成果，主要匝数值网格生成技术，流场解算器，面向对象的界面设计等三部分组成。     

圆球绕流场的尾涡分析和升阻力研究

采用自编的分块算法程序模拟了雷诺数在20～1000之间的圆球绕流场.在Re=25时捕捉到流动分离,与试验结果一致.对Re=250时稳态非对称尾流区内流体的输运情况进行研究,证实圆球绕流场中纵向对称面的存在.对于非稳态流动,主要研究了阻力和横向力的时间变化规律,并分析了频谱特征.计算发现横向合力主要在横截面上两个很窄的区间内偏移.经过几种不同涡定义方法的优劣测试,本文采用Hunt等人介绍的Q-定义方法对非稳态绕流场的尾涡结构进行了直观描述.     

A Structured Mesh Euler and Interactive Boundary Layer Method for Wing/Body Configurations

To compute transonic flows over a complex 3D aircraft configuration, a viscous/inviscid interaction method is developed by coupling an integral boundary-layer solver with an Eluer solver in a ＂semi-inverse＂ manner. For the turbulent boundary-layer, an integral method using Green＇s lag equation is coupled with the outer inviscid flow. A blowing velocity approach is used to simulate the displacement effects of the boundary layer. To predict the aerodynamic drag, it is developed a numerical technique called far-field method that is based on the momentum theorem, in which the total drag is divided into three component drags, i.e. viscous, induced and wave-formed. Consequently, it can provide more physical insight into the drag sources than the often-used surface integral technique. The drag decomposition can be achieved with help of the second law of thermodynamics, which implies that entropy increases and total pressure decreases only across shock wave along a streamline of an inviscid non-isentropic flow. This method has been applied to the DLR-F4 wing/body configuration showing results in good agreement with the wind tunnel data.     

航天飞机系统两体分离问题的探讨

本文简要地叙述了美国研究轨道器与外挂贮油箱,轨道器与载机分离问题的概况。对垂直起飞两级入轨的并联两机的分离问题,提出了研究模型并作了具体分析,着重提出了实现两机安全分离需要解决的技术难点。 二级航天飞机的两机分离问题,是未来航天高技术领域的关键技术之一,本文阐述了解决两体并联分离问题我国现有的技术水平,并提出了解决该问题的技术方案。     

多孔介质空心圆柱绕流的摄动解

本文主要讨论了绕多孔介质空心圆柱的有势流动问题。运用摄动方法,给出了速度势的四阶近似,然后得到了圆柱表面的无量纲的压力系数和阻力系数。结果发现在势流的情况下多孔介质圆柱受到附加阻力作用,并且在圆柱的喷射或吸收流体的特征速度与来流特征速度的比值是一个小量的时候,阻力系数与特征速度比成简单的线性关系。     

热流限制下的最优气动力辅助变轨

以变轨能量消耗最小为优化目标，应用极大值原理研究了飞行过程受热流限制和升力系统约束下的气动力辅助共面变轨问题，飞行过程成分第一自由弧段，约束弧段，第二自由弧段三个部分，讨论了升力系数的最优表达式，分析了飞行过程中两种约束的相互作用，给出了约束弧起始位置的角点条件和终端的横截条件下，对不同的初值选取方法讨论了三种计算策略，并给出了数值算例。     

Flow separation control on swept wing with nanosecond pulse driven DBD plasma actuators

A 15° swept wing with dielectric barrier discharge plasma actuator is designed.Experimental study of flow separation control with nanosecond pulsed plasma actuation is performed at flow velocity up to 40 m/s. The effects of the actuation frequency and voltage on the aerodynamic performance of the swept wing are evaluated by the balanced force and pressure measurements in the wind tunnel. At last, the performances on separation flow control of the three types of actuators with plane and saw-toothed exposed electrodes are compared. The optimal actuation frequency for the flow separation control on the swept wing is detected, namely the reduced frequency is 0.775, which is different from 2-D airfoil separation control. There exists a threshold voltage for the low swept wing flow control. Before the threshold voltage, as the actuation voltage increases, the control effects become better. The maximum lift is increased by 23.1% with the drag decreased by 22.4% at 14°, compared with the base line. However, the best effects are obtained on actuator with plane exposed electrode in the low-speed experiment and the abilities of saw-toothed actuators are expected to be verified under high-speed conditions.     

Development process of muzzle flows including a gun-launched missile

Numerical investigations on the launch process of a gun-launched missile from the muzzle of a cannon to the free-flight stage have been performed in this paper. The dynamic overlapped grids approach are applied to dealing with the problems of a moving gun-launched missile. The high-resolution upwind scheme(AUSMPW+) and the detailed reaction kinetics model are adopted to solve the chemical non-equilibrium Euler equations for dynamic grids. The development process and flow field structure of muzzle flows including a gun-launched missile are discussed in detail.This present numerical study confirms that complicated transient phenomena exist in the shortly launching stages when the gun-launched missile moves from the muzzle of a cannon to the freeflight stage. The propellant gas flows, the initial environmental ambient air flows and the moving missile mutually couple and interact. A complete structure of flow field is formed at the launching stages, including the blast wave, base shock, reflected shock, incident shock, shear layer, primary vortex ring and triple point.     

一种大面积比喷管的分段式设计与数值分析

为了满足大推力上面级发动机大面积比喷管的设计需求,采用了排放冷却前段和单壁辐射冷却尾段的分段式设计方案。在排放冷却前段传热计算的基础上,通过对内流场进行数值模拟,重点研究了单壁尾段在引入上游排放冷却气氢情况下的冷却特性和喷管效率。结果表明:对于大面积比喷管,采用带二次流的单壁金属喷管延伸段是现实可行的,有望达到较好的冷却保护效果并提高喷管效率。