航天发射塔回转轴承新型清洗剂研制

航天发射塔回转轴承由于尺寸较大、结构复杂等原因,对其直接进行拆卸保养的难度过大。针对航空煤油等传统轴承清洗液存在清洗不彻底、易燃易爆、人身健康危害等缺点,本文通过对轴承润滑脂的化学成分分析研究,配置出了一种新型清洗液,用于对航天发射塔回转轴承进行清洗。经实验验证,该清洗液具有易于配置、便于存储、除油率高等特点。     

模化设计对离心压气机气动噪声的影响

采用数值计算方法研究了模化设计对压气机气动噪声的影响,三维流场计算结果表明模化设计压气机与原始机型满足相似准则,整级性能参数误差在2%以内;流场结构的分析进一步证实了模化机型与原始机型流场相似。基于非定常雷诺平均方法和声学边界元方法的混合气动声学方法对模化前后的压气机气动噪声进行了数值预测,结果表明:压气机气动噪声主要由离散单音噪声和宽频噪声组成,且离散单音噪声占主导。模化机型总声压级随着模化比减小逐渐减小,相比于原始机型,模化机型离散单音噪声峰值仅略有降低,而宽频噪声大幅提高。压气机气动噪声在进气管口有明显指向性,模化机型声压幅值和指向性较原始机型降低,且变化趋势与模化比成正比。      

基于MED和LMD的自动倾斜器轴承广义Shannon熵谱分析

针对轴承信号微弱故障特征易被强背景噪声淹没的问题,提出采用最小熵反褶积,通过逆滤波器最优化设计,对目标信号进行降噪处理,其峭度值提高了约3.8倍,增强了信号的微弱故障特征;针对非平稳非线性信号频率成分复杂难以解调的问题,提出采用局部均值分解(LMD)和峭度-相关系数筛选准则,其可对非平稳非线性信号进行自适应分解和最优重构,提高了信号的信噪比;针对信号耦合调制及边频突出的问题,通过引入广义Shannon熵进行包络谱带内降噪处理,信号一阶故障特征调制频率与故障特征频率的幅度比降低了24%~43%。通过实验室信号及某型直升机自动倾斜器轴承故障诊断地面试验的分析结果验证了该方法的合理性和可行性。      

角接触球轴承生热预测方法与灵敏度分析

通过拉丁超立方实验设计法获取角接触球轴承NSK-7015C的结构参数样本数据,采用Newton-Raphson法求解轴承变形几何协调方程、滚动体平衡方程和内圈平衡方程所构成的非线性方程组。应用Kriging和Monte Carlo相结合的方法(AK-MCS)构建样本数据与轴承生热的函数关系,在此基础之上使用全局灵敏度计算方法计算轴承结构参数对轴承生热的影响。研究结果表明:在相同轴承结构参数下,采用AK-MCS法预测的轴承生热与轴承拟静力学分析模型求得的结果差值均小于0.003 W,说明AK-MCS算法的预测结果具有较高的准确性;轴承生热对轴承滚动体直径变化反应最灵敏,轴承内、外圈沟道直径影响次之,轴承内、外圈沟道曲率半径影响最小,该研究能够为轴承结构参数的设计优化和加工精度的选择提供理论依据。      

盘式对转永磁风力发电机设计与分析

针对现有风力发电系统普遍存在的工作风速范围较窄、风能利用率较低等问题,设计了一种盘式双转子对转永磁风力发电机,双转子对转运行。在介绍该电机的结构与运行原理的基础上,推导了电机功率尺寸方程,给出了该电机的初步设计方法。利用有限元软件对电机进行了三维建模和动态仿真分析,得到其磁路特点和电磁性能,验证了所提设计方法的有效性。     

Thermoelastohydrodynamic analysis of misaligned bearings with texture on journal surface under high-speed and heavy-load conditions

Hydrodynamic journal bearings are used to support the planetary gears in the transmission system of a Geared Turbo Fan engine, and they operate under severe working conditions, such as misalignment, high speed, and heavy load. Surface texture is regarded as an effective approach to improve mechanical properties under severe working conditions. However, the effects of surface texture on misaligned journal bearings under severe conditions have not been well studied. Therefore, a thermoelastohydrodynamic(TEHD) lubricating model with a textured and misaligned journal is presented in this study. Solid deformation, heat transfer between oil and the bearing, and heat convection between air and the bearing are considered in the model. The effects of cavitation and viscosity-temperature are also taken into account. The impacts of surface texture parameters and the misalignment angle on lubricating properties are investigated in the model. Results indicate that the bearing lubricating performance is greatly improved by optimal surface texture considering journal misalignment. The maximum oil film pressure and load-carrying capacity of a journal bearing increase with journal misalignment. Meanwhile, the oil film temperature increases sharply while considering misalignment.     

基于机匣信号的滚动轴承故障卷积神经网络诊断方法

针对在滚动轴承故障激励下的机匣微弱故障特征,提出了基于卷积神经网络(CNN)的故障诊断方法。利用矩阵图法、峭度图法以及小波尺度谱法3种振动信号的预处理方法,将一维原始信号转换为图像信号;利用卷积神经网络对故障进行识别。通过比较分析发现:通过连续小波尺度谱更易提取滚动轴承的故障特征,其故障识别率达到95.82%,均高于其他几种振动信号预处理方法;由于卷积神经网络可以利用深层网络结构自适应地提取滚动轴承故障特征,比传统支持向量机(SVM)方法的故障识别率高约7%。结果证明了该方法的有效性与可行性,且具有较好的泛化能力和稳健性。      

Structural mass prediction in conceptual design of blended-wing-body aircraft

The Blended-Wing-Body (BWB) is an unconventional configuration of aircraft and considered as a potential configuration for future commercial aircraft. One of the difficulties in conceptual design of a BWB aircraft is structural mass prediction due to its unique structural feature. This paper presents a structural mass prediction method for conceptual design of BWB aircraft using a structure analysis and optimization method combined with empirical calibrations. The total BWB structural mass is divided into the ideal load-carrying structural mass, non-ideal mass, and secondary structural mass. Structural finite element analysis and optimization are used to predict the ideal primary structural mass, while the non-ideal mass and secondary structural mass are estimated by empirical methods. A BWB commercial aircraft is used to demonstrate the procedure of the BWB structural mass prediction method. The predicted mass of structural components of the BWB aircraft is presented, and the ratios of the structural component mass to the Maximum TakeOff Mass (MTOM) are discussed. It is found that the ratio of the fuselage mass to the MTOM for the BWB aircraft is much higher than that for a conventional commercial aircraft, and the ratio of the wing mass to the MTOM for the BWB aircraft is slightly lower than that for a conventional aircraft.     

航空铆钉连接件的抗冲击性能

以分离式Hopkinson拉杆装置为基础,设计了特殊的铆接试验件,对MS20615铆钉的铆接结构开展了动态加载下不同加载角度、不同加载速率的力学性能试验。结合其准静态试验结果,获得了铆接结构在纯剪切、30°拉剪耦合、45°拉剪耦合、60°拉剪耦合和纯拉伸试验下的力学性能参数。试验结果表明,加载角度、加载速率对铆接结构的失效载荷与失效模式有显著的影响。在试验结果的基础上,使用有限元软件LS-Dyna建立了铆接结构的简化模型,对比了试验和数值模拟得到的铆接结构载荷-位移曲线,并对简化数值模型进行了网格相关性分析,验证了简化的铆钉单元模型的可行性。     

热载荷下热障涂层表-界面裂纹间的相互影响

针对高温热载荷条件下APS制热障涂层裂纹失效问题,基于涂层系统热弹、热弹塑性本构关系,考虑陶瓷层/氧化层/粘结层界面凹凸形貌,依据表、界面裂纹位置、性质不同,分别运用断裂力学和损伤力学理论建立裂纹演化模型,结合围线积分和内聚力单元法,分析了热载荷下表、界面裂纹断裂参量及开裂状态,研究了陶瓷层表面裂纹与粘结层/氧化层界面裂纹间的相互影响,揭示了热、力、化多场耦合下的裂纹失效机理。结果表明,表面裂纹大幅改变界面微区域的应力分布状态,靠近界面时能使界面裂纹扩展程度整体增加20%,且相邻凸峰处开裂非均匀性可达81%,表面裂纹断裂参量主要受多层结构热失配及缺陷主导,界面裂纹对其影响相对较小,分析结果与试验结果一致。