教练机发动机设计载荷谱推导方法

系统地研究了教练机航空发动机设计载荷谱的推导方法，主要包括：（1）基准机的选取与现役发动机载荷谱的空测、统计；（2）新机发动机飞行剖面的预测；（3）新机发动机设计任务循环的编制等三大步骤。提出的方法具有一定的通用性，可以推广到其它类型的发动机设计载荷谱研究。     

Some active galactic nuclei as cosmological probes

A method of using AGNs as cosmological probes and some recent results are discussed. The method is based on fitting the Hedgehog model to observations of spectra, structure and polarization of AGN radio emission and time variations of the observed quantities. If red shifts of selected AGNs are known, extragalactic distances, the Hubble constant and the deceleration parameter of the Universe can be measured using only radio observations. Recent results may give new strong arguments for the basic model to be in agreement with observations of variable spectra and structure of many AGNs, and may allow preliminary selection of AGNs for further use.     

弹用涡喷、涡扇发动机发展概况

介绍了飞航式导弹主要动力装置的弹用涡喷、涡扇发动机的发展概况，包括发展历史、特点、技术现状，并论述了发展趋势。     

斜齿圆柱齿轮正交法参数优化设计

用正交法对斜齿圆柱齿轮传动进行参数优化设计 ,用方差分析法找出对质量影响最显著的因素 ,最后 ,由信噪比作为指标选出最佳参数组合 ,这是一种快速创新开发产品的设计方法。     

喷管扩张段烧蚀的“台阶效应”计算

当喉衬和扩张段内衬采用具有不同烧蚀率的材料时,常出现“台阶效应”.本文以气动热化学烧蚀机理为基楚,提出应用适当的对流换热和加剧的化学反应计算对台阶效应区进行修正的方法,使台阶效应区的烧蚀率预示更切合实际工况.     

多机并联火箭羽流流场及其底部热环境分析

For the problem that the plume flow field structure of a multi engine parallel rocket is complicated and the bottom thermal environment is extremely harsh, which may cause the failure of the engine structural components, the plume flow field and thermal environment at different altitudes are studied through numerical simulation. The result is compared with the measured results in flight which shows that when the rocket is flying at a low altitude, the plume of the engines do not interfere with each other. As the flight altitude increases, the plumes gradually expand and begin to interfere with each other, and finally there is an obvious backflow at the bottom of the rocket. The maximum heat flux at the moment of take off is basically the same as the measured value in flight. Before the backflow occurs, the heat flux mainly consists of radiant heat, the convective heat flow increases as the flight altitude grows, but it is also much smaller than the peak heat flow at takeoff. The result has certain guiding significance for the optimal design of engine structure thermal protection.     

磁选态单束铯束管束光学参数的模拟计算和设计

为提高铯束管跃迁信号强度,在束光学参数设计中,用蒙特卡罗方法模拟计算铯原子通过率和未跃迁比例。通过改变模拟计算中的束光学参数,分析铯原子通过率、未跃迁比例和倍增器首极电流的变化趋势,得到了主要束光学参数的合理取值范围。在铯束管实际装配和试验中使用束光学参数设计结果,有效地增加了倍增器首极电流。     

火箭橇体进水现象研究

在考核过载承受能力的火箭橇试验后,橇体内发现有水,从空气动力学的角度,对火箭橇体进水现象进行了初步分析,并利用FLUENT软件对进水原因进行了初步研究,通过分析,发现结构在穿越跨音速阶段时,由于内外压差的变化将导致内部或外部产生水汽。该发现为结构设计提供有益的建议。     

某发动机调节器自动检测异常故障分析

针对某型发动机自动调节器自动检测异常的故障现象,对产生发动机自动调节器自动检测异常的原因进行了深入地研究分析,并提出了针对性的预防措施。     

Satellite launch vehicle effect on the Earth’s lower ionosphere: A case study

The effect of the rocket exhaust products on the D-region of the ionosphere is investigated with the help of Very low frequency (VLF) electromagnetic wave propagation characteristics within the Earth-ionosphere waveguide. The changes in the electron density profile are computed from the observed VLF signal amplitude perturbations about 3 dB during the rocket launch. We find a localized electron depletion in the lower ionosphere at an altitude of around 58 km, that is thought to be originated by the attachment of ionospheric ion and molecular hydrogen along with water molecule in the exhaust product of first stage burn of Geosynchronous Launch Vehicle (GSLV) rocket at the time of GSLV launched from Sriharikota, India, on 27 August 2015 at 11:22 UT (16:52 IST). The ionospheric depletion perturbed the navigational VLF signal (VTX = 17 kHz) 134 s after the launch of the GSLV rocket.