航空发动机材料寿命问题探讨

归纳了航空发动机材料的变形损伤机理,强调了变形物理机制模型在部件设计和全寿命预测管理方面的应用     

耐腐蚀性过滤器用多孔陶瓷材料的制备（I）多孔先驱体的合成及其陶瓷化

对泡沫状多孔聚碳硅烷（PCS）的合成反应条件进行了较为详细的研究，通过控制化学反应的温度、压力和反应时间制备出了熔点高达380℃、相对分子质量Mn〉3000、陶瓷产率达79％（质量分数），密度〈0．6g／cm^3的多孔聚合物。对不同反应条件下所制得的多孔PCS的性能进行了表征，并利用IR、TG等手段对泡沫状多孔PCS的热解机理进行了初步探讨。     

航空发动机制造仿真数据管理集成应用系统实现

基于航发集团工程数据中心协同、共享环境,结合航空发动机制造仿真业务特点和需求,构建了制造仿真数据管理集成应用系统,涵盖了制造仿真结果数据管理、仿真数据定义和管理、仿真资源库管理、数据协同等方面的业务功能,面向航空发动机制造仿真数据的统一管理、协同共享进行了有益的探索。     

Numerical investigation of flow mechanisms of tandem impeller inside a centrifugal compressor

This study numerically investigated a single stage centrifugal compressor ‘‘Radiver’’ with a wedge diffuser and several tandem-designed impellers to explore the flow phenomena within the tandem impeller and the potential to enhance compressor performance. The results demonstrate that tandem design and clocking fraction (λ_s) significantly affects the compressor performance. The compressor stage with tandem impellers of Series A of boundary layer growth interruption alone are observed to have a widely operating range but efficiency and total pressure ratio penalty compared with that of conventional impeller. The tandem impeller with at least the same impeller efficiency as the conventional design is considered as a critical design criteria so that further modification process based on the flow characteristic of tandem impeller is necessary. In order to restrain the inducer wake and exducer shock losses, parameters modification of blade angle and thickness distributions are necessary and the modified tandem impeller of Series B is obtained. The modified tandem impeller with 25% clocking arrangement shows an 8.45% stall margin increase and maintains the total pressure ratio and efficiency as the conventional design, which proves the potential of tandem impeller to improve compressor stage performance. It is noteworthy that the tandem impellers of Radiver have not shown obviously balanced exit flow field and the fundamental mechanism of stall margin extending of tandem impeller lies on the improved impeller/diffuser matching performance resulting from the incidence angle variation at diffuser inlet.     

惯导系统旋转机构轴承动力学建模方法研究

旋转机构是旋转调制捷联惯导系统的关键部件之一。为了精确模拟旋转机构的动力学特性,研究了支撑旋转轴系的双列球轴承的动力学建模方法,提出了使用Bushing单元来建立同时具有径向移动刚度、轴向移动刚度和径向角刚度的三向刚度轴承动力学模型的方法。利用有限元数值仿真方法计算了三向刚度数值,并利用轴承手册上的经验公式进行了验证。在此基础上,建立了含弹性轴承支撑的旋转调制捷联惯导系统旋转机构的结构动力学有限元模型,分析比较了轴承有无角刚度两种状态下的固有模态。分析结果表明:对于旋转调制捷联惯导系统旋转机构来说,轴承模型角刚度对计算精度的影响较大,角刚度已知的模型更接近真实情况。     

An experimental system for release simulation of internal stores in a supersonic wind tunnel

Aerodynamic parameters obtained from separation experiments of internal stores in a wind tunnel are significant in aircraft designs. Accurate wind tunnel tests can help to improve the release stability of the stores and in-flight safety of the aircrafts in supersonic environments.A simulative system for free drop experiments of internal stores based on a practical project is provided in this paper. The system contains a store release mechanism, a control system and an attitude measurement system. The release mechanism adopts a six-bar linkage driven by a cylinder, which ensures the release stability. The structure and initial aerodynamic parameters of the stores are also designed and adjusted. A high speed vision measurement system for high speed rolling targets is utilized to measure the pose parameters of the internal store models and an optimizing method for the coordinates of markers is presented based on a priori model. The experimental results show excellent repeatability of the system, and indicate that the position measurement precision is less than0.13 mm, and the attitude measurement precision for pitch and yaw angles is less than 0.126°, satisfying the requirements of practical wind tunnel tests. A separation experiment for the internal stores is also conducted in the FL-3 wind tunnel of China Aerodynamics Research Institute.     

波音健康管理工程环境浅析

健康管理工程环境(HMEE)是由项目分析与建模环境、开发环境、使用环境等三部分构成的一个开放式健康管理集成与实验平台,将来自于工业部门、学术界以及政府技术基地的健康管理技术集成起来,转化成成熟、实用的飞行器综合健康管理(IVHM)系统.本文简要介绍了构成HMEE的三部分的目标和功能,以及所提供的相关工具、技术和过程.     

Ti6Al4V合金冷拔过程变形机制研究

研究了钛合金经冷拉后的变形组织和性能,金相、透镜观察表明,位错滑移是钛合金室温下塑性变形的主导机制.钛合金经过冷拉拔后的组织性能变化可分为3个阶段:第一阶段为快速硬化阶段,以大晶粒的变形为主,位错缠结形成;第二阶段其抗拉强度值增加趋于平缓,近乎于一个平台,部分小晶粒也开始参与变形,位错带形成;第三阶段为应变量大于0.6...     

国有企业经营者的激励总是及其对策

首先分析了我国国有企业经营者的激励问题及其产生原因,在此基础上提出了解决我国国有企业经营者激励问题的构想。     

STUDY ON ALGORITHM OF SENSOR MANAGEMENT BASED ON FUNCTIONS OF EFFICIENCY AND WASTE

The sensor management system is a subsys-tem of a multisensor data fusion system,and itspurpose is to satisfy requests of multitarget andscanned space by using the limited sensor resourcesin order to gain optimal measurement values of allspecified characteristics ( detection and captureprobability,emission power of sensor,trackingprecision or target losing probability and so on) .By the optimal principle listed above,sensor re-sources are distributed in science and reason.In aword,itis a key p…