任意转角石英晶片电弹常数的快速计算

电弹常数是描述压电材料最重要的常数,压电元器件的设计以其所用压电材料的电弹常数为基础。石英晶体是目前应用最广的压电材料,由于晶体的各向异性,其电弹常数的值随品片的切割方位而变,且通常须用矩阵表示。因此,任意切型和切角的电弹常数计算就变得非常复杂。本文对任意切型的电弹常数归纳了一种简便的计算方法并在微机上编出了相应的程序。通过运行本文工作的程序,即可随时得到任意切型及切角电弹常数的理论值,这样就可为研制和设计工作提洪可靠的理论依据,并节省大量的人工计算时间。     

基于云平台的电机设备远程运维系统设计

针对电机设备远程运维需求,在分析电机设备远程运维优势的基础上,设计了基于云平台的电机设备远程运维系统。对远程运维系统的架构和主要功能进行了详细阐述。电机设备远程运维系统可降低设备售后成本、提高售后服务质量,进而改进设备质量;同时也可降低用户停机、维修时间,极大地提高用户生产效率。     

电机生产企业绿色工厂评价内容、指标及方法的研究

为积极响应《中国制造2025》以及《工业和信息化部办公厅关于开展绿色制造体系建设的通知》,针对我国目前在电机生产行业相关绿色工厂评价要求缺失的现状,结合我国电机生产企业的物料使用特点、生产工艺特点、生产装备特点、产品特点、能源利用特点、主要污染物排放特点等6个方面,对电机生产企业绿色工厂评价内容、指标及方法进行研究。该研究为我国电机生产行业全面推行绿色制造,加快电机生产行业绿色改造升级,构建电机生产行业绿色制造体系,提高我国电机生产行业的国际竞争力作出积极贡献。     

大功率UVLED分布式驱动技术研究

以工业印刷过程中UVLED固化为应用背景,研究并设计了一种UVLED驱动控制系统。分析了采用分布式驱动的优势,确定了驱动电源采用两级驱动结构,包括前端AC/DC恒压模块和后端DC/DC恒流模块。对该系统的驱动电源模块进行了试验测试和结果分析,试验结果验证了该UVLED驱动控制系统的可行性。     

航空发动机单管燃烧室试验器测控系统设计

为满足新型燃烧试验需求,针对航空发动机燃烧室试验中单管试验器的特点,提出并设计了1种基于以太网的分布式测控系统。详细阐述了该系统的总体设计方案,分别从软件和硬件两方面研究分析了该系统的详细设计过程,并对其进行了测量不确定度分析。目前该系统已经完成试验前调试,并已顺利完成了多项单管燃烧室燃烧试验任务。结果表明:该系统可靠性高、稳定性良好、通用性强,满足试验器测控需求,具有较高的工程应用价值。     

陆基超远程无线电导航发展研究

定位导航和授时(PNT)系统是保障现代社会正常运转必不可少的基础设施,为了提供可靠的PNT信息服务,需要研发不依赖于卫星导航的PNT系统。介绍了国内外陆基超远程导航系统的发展情况,提出了发展基于甚低频无线电信号的陆基超远程无线电系统架构、关键技术及发展建议,陆基超远程导航系统可以在卫星导航不可用时提供备份,对于构建冗余可靠的国家PNT体系、保障PNT信息的安全及可靠性具有重要意义。     

基于FMI的飞行器分系统多源异构模型一体化仿真

针对飞行器设计领域各个分系统独立建模设计,产生的多源异构模型难以进行联合数学仿真的问题,提出了采用FMI构建多源异构模型的通用通信接口,从FMU模型封装与联合仿真两方面,给出了一种一体化仿真平台解决方案。以实际项目为背景,验证了平台的兼容性和扩展性。为控制专业的设计工作提供了新的平台,解决了各分系统研发单位之间模型级交流的困难与障碍。同时使控制专业设计人员仅需要了解分系统原理,而无需完全细致了解模型内部结构甚至自行建模,就可以进行设计验证工作,缩短了产品研制周期。     

面向建筑空间的OFDM信号定位性能分析

针对利用OFDM信号进行定位时信号非连续性问题,提出一种粗检测和精细检测结合的测距方法,将距离测量转换为不同尺度的时延样点,采用时域粗检测快速估算接收OFDM信号的最大相关峰值,然后对传输时延进行频域精细测量,提升了小数倍采样周期时延测量的精度。在此基础上,分析了OFDM信号的定位性能,仿真结果表明,当OFDM信号在信噪比-11dB的情况下测距误差由3m左右(子载波数512)降至1m(子载波数4096)。     

Near-infrared study of open clusters Teutsch 10 and Teutsch 25

The astrophysical parameters have been estimated for two unstudied open star clusters Teutsch 10 and Teutsch 25 using the Two Micron All Sky Survey ($2\mathit{MASS}$) database. Radius is estimated as 4.5 arcmin for both clusters using radial density profiles. We have estimated proper motion values in both RA and DEC directions as $2.28\pm 0.3$ and $-0.38\pm 0.11$?mas?yr^?1 for Teutsch 10 and $0.48\pm 0.3$ and $3.35\pm 0.16$?mas?yr^?1 for Teutsch 25 using $\mathit{PPMXL}$¹ catalog. By estimating the stellar membership probabilities, we have identified 30 and 28 most likely members for Teutsch 10 and Teutsch 25 respectively. We have estimated the reddening as $E(B-V)=0.96\pm 0.3$?mag for Teutsch 10 and $0.58\pm 0.2$?mag for Teutsch 25, while the corresponding distances are $2.4\pm 0.2$ and $1.9\pm 0.1$?kpc. Ages of $70\pm 10$?Myr for Teutsch 10 and $900\pm 100$?Myr for Teutsch 25 are estimated using the theoretical isochrones of metallicity Z?=?0.019. The mass function slopes are derived as $1.23\pm 0.30$ and $1.09\pm 0.35$ for Teutsch 10 and Teutsch 25 respectively. Estimated mass function slope for both the clusters are close to the Salpeter value ($x=1.35$) within the errors. Estimated values of dynamical relaxation time are found to be less than cluster’s age for these objects. This concludes that both objects are dynamically relaxed. The possible reason for relaxation may be due to dynamical evolution or imprint of star formation or both.     

Modeling and experimental validation of sawing based lander anchoring and sampling methods for asteroid exploration

This paper presents a novel lander anchoring system based on sawing method for asteroid exploration. The system is composed of three robotic arms, three cutting discs, and a control system. The discs mounted at the end of the arms are able to penetrate into the rock surface of asteroids. After the discs cut into the rock surface, the self-locking function of the arms provides forces to fix the lander on the surface. Modeling, trajectory planning, simulations, mechanism design, and prototype fabrication of the anchoring system are discussed, respectively. The performances of the system are tested on different kinds of rocks, at different sawing angles, locations, and speeds. Results show that the system can cut 15?mm deep into granite rock in 180?s at sawing angle of 60°, with the average power of 58.41?W, and the “weight on bit” (WOB) of 8.637?N. The 7.8?kg anchoring system is capable of providing omni-directional anchoring forces, at least 225?N normal and 157?N tangent to the surface of the rock. The system has the advantages of low-weight, low energy consumption and balance forces, high anchoring efficiency and reliability, and could enable the lander to move and sample or assist astronauts and robots in walking and sampling on asteroids.