Mechanical behavior and properties of fiber reinforced ceramic matrix composites for high temperature use

Ceramics can keep their mechanical characteristics up to 2 000℃ or higher.In this paper,A model to predict ultimate strength of continuous fiber-reinforced brittle matrix composites is developed.A statistical theory for the strength of a uni-axially fiber-reinforced brittle matrix composite is presented.Also a semi-empirical frictional heating method for estimating in-situ interfacial shear in fiber-reinforced ceramic matrix composites was improved.Local uneven fiber packing variation as well as uneven micro-damage during fatigue can be expected to have effects on the composites:generation of frictional heating,thermal gradients,and residual stresses around local fiber breaks.This study examined those engineering interests by the finite element method.      

类蛛网状盘式谐振微陀螺的抗冲击性能与结构误差仿真分析

具有导航级潜能的盘式谐振微陀螺是国际研究最热门的一类微机械陀螺,在此基础上设计了一款频率裂解小的类蛛网状盘式谐振微陀螺。通过有限元仿真软件进行了模态分析和冲击分析,仿真结果表明类蛛网状盘式谐振微陀螺工作模态与寄生模态最小频差为3.9kHz,可承受的冲击载荷加速度高达25000g。此外,开展了晶向误差和工艺误差等结构误差对频率裂解影响的仿真研究,结果表明,其比圆环状盘式谐振陀螺在频率裂解上具有更低的结构误差敏感度。综上说明该结构能有效抑制寄生模态干扰、抗冲击性能强且结构误差鲁棒性好,具有较好的发展前景。     

复合材料抗冲击性能和结构压缩设计许用值

 从复合材料结构压缩设计许用值的概念和复合材料的冲击后压缩强度性能出发,讨论按NASA标准得到的CAI值与它们的关系,指出传统的CAI值不能充分反映复合材料体系的抗冲击性能,且与结构压缩设计许用值无任何联系。在对复合材料结构完整性要求和作者的试验研究,和对国外文献总结的基础上,提出复合材料抗冲击性能应包括损伤阻抗和损伤容限两方面。大量的试验数据证实复合材料层压板抗冲击性能存在拐点现象,在对拐点附近复合材料层压板的破坏机理研究基础上,建议用拐点附近的性能建立复合材料层压板抗冲击性能的评定体系,即可以用表面层在冲击下保持其完整性的最大能力(最大接触力)来表征复合材料体系的损伤阻抗(韧性);用出现拐点后基本不变的压缩强度(破坏应变)门槛值来表征复合材料体系的损伤容限。     

Flight Flutter Modal Parameters Identification with Atmospheric Turbulence Excitation Based on Wavelet Transformation

针对基于大气紊流激励的飞机颤振试验数据具有信噪比低以及测量数据以加速度响应形式给出等特点,将小波变换与随机减量法相结合对飞机颤振模态参数进行识别,首先利用随机减量法获得结构在非零初始加速度条件下的自由衰减响应,然后对该自由衰减响应进行Morlet连续小波变换,为使变换简单,本文采用了Parseval定理和留数定理,利用Morlet的带通滤波特性,通过搜索小波变换系数在不同的尺度区域内的极大值,再根据小波变换系数的极大值、相角与固有振动频率及阻尼系数间的关系,即可识别出各模态参数。并对利用小波变换识别颤振模态参数时,实现模态解耦应满足的条件进行了分析研究。通过仿真和飞机颤振试验数据分析,验证了该识别方法不仅简单、有效和可行,而且具有较强的抗噪性。     

一种针对局部结构的有限元模型修正方法

针对实际结构有限元模型（FEM）的建模误差通常仅存在于局部区域,提出了一种对局部结构单独进行模型修正的方法。首先,根据频响函数（FRF）解耦理论得到由残余结构频响函数与包含待修正参数的局部结构动刚度所重构的整体结构频响函数的拟合值,然后通过迭代优化使其与测量值的残差最小化,从而得到参数的极大似然估计。在此基础上,将残差关于参数的灵敏度以局部结构动力学矩阵表示,建立了模型修正的基本方程,利用整体结构的测试数据即可直接对分离出来的局部结构进行模型修正。最后,对喷气式飞机和三角机翼飞机分别进行了数值模拟和实验研究,验证了所提方法的可行性和有效性。结果表明,所提方法可以成功地用于仅局部区域含有建模误差的实际结构有限元模型的修正,修正后的有限元模型的动态特性与实际结构有较好的一致性。     

航空发动机法兰接触热阻特性实验研究

通过搭建法兰接触热阻实验台,在法兰间隙0～0.75 mm、螺栓拧紧力矩20～40 N·m参数范围内,测量不同材料机匣多个轴向位置的壁温来获得通过法兰的热流,得到法兰的接触热阻、单位接触热导。分析了法兰间隙、螺栓拧紧力矩对法兰接触热阻特性的影响。研究结果表明随着法兰间隙的增加,接触热阻呈线性增加,最大增加0.03 K/W,单位接触热导先迅速减小,后趋于平缓,最大降低了10 744.2 W/(K·m2),约94.5%;随着拧紧力矩的增加,接触热阻减小,最大降低了22.1%。     

Latitudinal variation of the topside electron temperature at different levels of solar activity

A database of electron temperature (T_e) measurements comprising of most of the available satellite measurements in the topside ionosphere is used for studying the solar activity variations of the electron temperature T_e at different latitudes, altitudes, local times and seasons. The T_e data are grouped into three levels of solar activity (low, medium, high) at four altitude ranges, for day and night, and for equinox and solstices. We find that in general T_e changes with solar activity are small and comparable in magnitude with seasonal changes but much smaller than the changes with altitude, latitude, and from day to night. In all cases, except at low altitude during daytime, T_e increases with increasing solar activity. But this increase is not linear as assumed in most empirical T_e models but requires at least a parabolic approximation. At 550 km during daytime negative as well as positive correlation is found with solar activity. Our global data base allows to quantify the latitude range and seasonal conditions for which these correlations occur. A negative correlation with solar activity is found in the invdip latitude range from 20 to 55 degrees during equinox and from 20 degrees onward during winter. In the low latitude (20 to −20 degrees invdip) F-region there is almost no change with solar activity during solstice and a positive correlation during equinox. A positive correlation is also observed during summer from 30 degrees onward.     

碳硼复合渗研究及其应用

本文研究了２０钢和４５钢的碳硼复合渗渗层组织及耐磨性能。结果表明：复合渗可得到较强支撑作用的过渡层,从而使渗硼层耐磨性提高。饲料粉碎机锤片采用复合渗工艺处理后试用效果良好。     

火星磁层顶形成和变化的理论研究

考虑太阳风动压与行星电离层中的带电粒子热压及磁压之和平衡,建立了有大气（电离层）的行星磁层顶形成的理论模型,结合卫星对火星的观测数据,对子午面内向日侧火星磁层顶位形进行了数值计算和分析,研究了火星磁层顶位形及其与太阳风动压之间的变化关系．结果认为,火星磁层顶位形与地球磁层顶相似．太阳风动压越大,火星磁层顶越靠近火星;太阳风动压越弱,火星磁层顶越远离火星．根据火星内秉磁矩从古到今逐渐减小的观点,探索了大尺度磁场（内禀磁矩）对火星磁层顶的贡献作用,结果认为大尺度磁场越强,火星磁层顶越远离行星．这对于进一步研究火星磁层的长期演化以及其他行星磁层的位形变化都具有重要的意义．     

An attempt to study long-term variation of sporadic E layers using neural networks

Strong positive correlation between sporadic E layers and the solar activity and the long-term declining trend of Es were found in this paper. Then the feed-forward back propagation neural networks (NNs) were used to simulate the long-term variation of Es at four stations and predict foEs yearly average values. The inputs used for NNs are the yearly mean values of foEs in the daytime of the past ten years and the yearly averaged data of solar 10.7 cm radio flux (F107) of the present year, and the output is the present yearly mean value of daytime foEs. The outputs of trained NNs have high correlation with the desired values and the foEs yearly mean values predicted by NNs have good agreement with the observed data. The results indicate that NNs can make full use of the observed data to simulate the long variation rule of Es. Also, the results confirm the effect of solar activity on Es.