Solar cycle and latitude dependence of high-beta suprathermal plasma conditions in interplanetary space between 1.3 and 5.4 AU

The analysis of energetic particles and magnetic field measurements from the Ulysses spacecraft has shown that in a series of events, the energy density contained in the suprathermal tail particle distribution is comparable to or larger than that of the magnetic field, creating conditions of high-beta plasma. In this work we analyze periods of high-beta suprathermal plasma occurrences (β_ep > 1) in interplanetary space, using the ratio (β_ep) of the energetic particle (20 keV to ∼5 MeV) and magnetic field energy densities from measurements covering the entire Ulysses mission lifetime (1990–2009) in order to reveal new or to reconfirm some recently defined interesting characteristics. The main key-results of the work are summarized as follows: (i) we verify that high-beta events are detected within well identified regions corresponding mainly to the vicinity of shock surfaces and magnetic structures, and associated with energetic particle intensity enhancements due to (a) reacceleration at shock-fronts and (b) unusually large magnetic field depressions. (ii) We define three considerable features for the high-beta events, concentrated on the next points: (a) there is an appreciable solar-activity influence on the high-beta events, during the maximum and middle solar-cycle phase, (b) the annual peak magnitude and the number of occurrences of high events are well correlated with the sunspot number, (c) the high-beta suprathermal plasma events present a spatial distribution in heliographic latitudes (HL) up to ∼±80°, and a specific important concentration on the low (−25° ? HL < −6°, 6° < HL ? 25°) and median (−45° ? HL < −25°, 25° < HL ? 45°) latitudes. We also reconfirm by a statistical analysis the results of Marhavilas and Sarris (2011), that the high-beta suprathermal plasma (β_ep > 1) events are characterized by a very large parameter β_ep (up to 1732.5), a great total duration (406 days) and a large percentage of the Ulysses-mission lifetime (which is equal to 6.34% of the total duration with usable measurements, and 11.3% of the duration in presence of suprathermal particles events).     

高速飞行器热结构工作时变模态参数辨识

高速飞行器由于其很高的飞行速度而无可避免地受到气动加热作用的影响,进而引起结构特性的时变。采用理论或有限元方法(FEM)进行数值分析,难以获取反映结构在飞行(工作)状态下的真实模态参数。通过辨识获取高速飞行器热环境下的时变结构模态参数是一项十分具有挑战性的任务。针对此问题,引入参数化时频域的最大似然方法,对气动加热作用下的高速飞行器升力面结构的时变模态参数进行了辨识。通过模拟真实飞行状态的数值算例研究,说明参数化时频域的最大似然方法能够很好地辨识出低信噪比(SNR)情况下的模态频率和模态振型,验证了参数化时频域最大似然方法适用于具有显著时变特征的高速飞行器热结构的时变结构模态参数辨识,可为将来相关的工程研究和应用提供良好的理论支持。     

时滞系统内模控制器参数整定方法研究

针对内模原理对时滞系统控制的局限性,利用一阶泰勒级数逼近模型的时 滞部分, 推导了工业上常见的一阶时滞和二阶时滞模型的内模控制参数表达式, 结合 ITAE 指标和系统鲁棒性设计了新的目标函数, 通过对目标函数的寻优实现了内模控制 器参数的整定。仿真结果表明,该方法具有较好的动态跟踪性能、较强的抗干扰性和鲁 棒性,具有一定的工程应用价值。     

粗糙表面偏振二向反射分布函数的影响参数及其反演

针对目标偏振二向反射特性研究中模型参数难以准确确定的问题,分析了粗糙表面偏振二向反射分布函数的影响参数,并通过理论推导和仿真计算,研究了各参数对粗糙表面散射特性的作用机理。总结分析了现有参数反演方法,针对现有方法存在的理论缺陷,在P-G(Preist-Germer)模型的基础上,提出了利用"相对偏振分量-角度"的相关关系进行参数反演的方法,设计了参数反演算法,进行了标准反射板和绿漆表面的偏振二向反射特性测试实验,并根据实验数据进行了参数反演和模型验证。实验结果表明,改进的参数反演方法可准确反演所有模型参数。利用反演参数进行模型验证,结果显示模型预测数据与实验数据具有较好的吻合度,验证了模型的准确性。     

粉末渗铌探讨

本文通过团体粉末渗铌试验，分析了渗剂成分、渗入时间与温度对不同材料渗层的影响，研究与探讨了渗层的组织和性能。对４５钢、Ｔ１０钢、９ＣｒＳｉ钢和ＧＣｒ１５钢等材料采用铌铁粉末进行的渗铌处理，均可形成一定厚度的铌渗层，且表层硬度提高很多，摩擦力矩数值反映渗铌后摩擦系数减少。     

CMH模型中部分参数对磁滞回线形状影响的研究

研究了Complete Moving Hysteresis模型计算公式中部分参数对磁滞回线形状的影响 ,发现饱和磁化强度Ms 和移动参数α对回线形状的影响并不显著 ,但参量γ的影响却是明显的 ,随着γ值的增加 ,回线的斜率增加 ,突变性增强     

正态-复合非时齐Poisson过程模型结构可靠性当量正态设计

讨论强度R～N（μ_R，_R），应力｛S（t），t∈［0，T］｝为非时齐Poisson过程模型结构可靠性当量正态设计。获得应力在设计基准期［0，T］内的最大值概率分布及统计参数估计；正态－复合非时齐Poisson过程模型结构可靠度及结构可靠性当量正态设计表达式。     

月面上升的轨迹优化与参数分析

面向月球采样返回任务分析需求,对月面上升段的轨迹优化及燃料消耗影响因素进行了研究。基于上升器运动模型,建立以燃料消耗最优为目标考虑入轨约束的轨迹优化模型,通过Gauss伪谱法和序列二次规划求解上升过程最优推力方向。改变运动模型中的初始推重比、入轨约束中的目标轨道参数,根据轨迹优化结果得到对应的燃料消耗,分析了这些因素对上升器燃料消耗的影响。针对上升器非共面起飞的问题,提出了上升偏航、升交点调整、倾角调整3种方案,从燃料消耗的角度分析了各方案的适用情况,为未来工程应用提供参考。     

Experimental and numerical investigation on surface quality for two-point incremental sheet forming with interpolator

The unsatisfied surface quality seriously impedes the wide application of incremental sheet forming (ISF) in industrial field. As a novel approach, the interpolator method is a promising strategy to enhance the surface quality in ISF. However, the mechanism for the improvement of surface quality and the influence of interpolator properties on surface roughness are not well understood. In this paper, the influences of process variables (i.e. tool diameter, step size and thickness of interpolators) on the forming process (e.g. surface roughness, forming force and geometric error) are investigated through a systematic experimental approach of central composite design (CCD) in two-point incremental sheet forming (TPIF). It is obtained that the increase in thickness of interpolators decreases the surface roughness in direction vertical to the tool path while increases the surface roughness in direction horizontal to the tool path. Nevertheless, the combined influence between thickness of interpolators and process parameters (tool diameter and step size) is limited. Meanwhile, the placement of interpolator has little influence on the effective forming force of blank. In addition, the geometric error enlarges with the increase of step size and thickness of interpolator while decreases firstly and then increase with an increase in tool diameter. Finally, the influencing mechanism of the interpolator method on surface quality can be attributed to the decrease of the contact pressure due to the increase of contact area with the unchanged contact force. Meanwhile, the interpolator method eliminates the sliding friction on the surface of blank due to the stable relative position between the blank and the interpolator.     

面向空间天线的TWF复合材料性能研究

利用碳纤维三向编织物（triaxial woven fabric，TWF）作为增强材料，与柔性基体材料硅橡胶复合，制成兼具一定柔性和刚性的复合材料壳膜结构，用于卫星天线反射器，是一种新型的高精度可展开天线实现方案。采用复合材料细观方法，对碳纤维增强硅橡胶TWF复合材料进行了力学性能的研究。首先由纤维和基体的材料特性得到均质纤维束的材料特性；接下来考虑纤维束交织情况（起伏波动）建立由纤维束组成的单胞实体有限元模型；然后对单胞实体有限元模型进行均匀化分析，施加周期性边界条件，最终得到等效的均质材料特性；为满足天线反射器高性能需求，分析了碳纤维种类、纤维体积分数对单胞等效性能的影响规律。对该材料力学性能的研究，可以为其未来应用于大型高精度可展开天线反射器提供一定的理论依据。