缺陷对高温合金蜂窝板弯曲力学性能的影响

采用预埋缺陷的方法,制备含有面芯脱焊缺陷的高温合金蜂窝板,进行了三点弯曲试验,研究了缺陷形状、大小、位置和蜂窝芯取向对蜂窝板三点弯曲损伤模式和承载能力的影响.研究发现,含面芯脱焊缺陷的蜂窝板在缺陷受压部位产生反向鼓包,并沿着宽度方向扩展为完全破坏;随着缺陷尺寸的增大,蜂窝板承载能力逐渐降低;当缺陷位于三点弯曲受拉面时,蜂窝板具有更高的三点弯曲极限载荷,且矩形缺陷试样的弯曲极限载荷要高于相同缺陷面积的圆形试样.最后,利用LS-DYNA对含圆形缺陷高温合金蜂窝板的三点弯曲性能进行了数值模拟分析,得到其三点弯曲过程中的应力分布状态.     

基于对偶四元数的捷联惯导算法在发射点惯性系下的应用研究

针对导弹类载体在做复杂的高动态机动时,采用传统的捷联惯导算法容易产生圆锥误差与划船误差,从而导致解算精度降低的问题,在发射点惯性系下设计了基于对偶四元数的捷联惯导算法.在建立发射点惯性系下的捷联惯导解算模型的基础上,详细推导了基于对偶四元数的捷联惯导解算算法,通过对比分析其中的速度更新过程与传统算法的差异,说明该算法可...     

A null frame for spacetime positioning by means of pulsating sources

We introduce an operational approach to the use of pulsating sources, located at spatial infinity, for defining a relativistic positioning and navigation system, based on the use of four-dimensional bases of null four-vectors, in flat spacetime. As a prototypical case, we show how pulsars can be used to define such a positioning system. The reception of the pulses for a set of different sources whose positions in the sky and periods are assumed to be known allows the determination of the user’s coordinates and spacetime trajectory, in the reference frame where the sources are at rest. We describe our approach in flat Minkowski spacetime, and discuss the validity of this and other approximations we have considered.     

Evolution of periodic orbits near the Lagrangian point L2

A study of the evolution of the periodic and the quasi-periodic orbits near the Lagrangian point L₂, which is located to the right of the smaller primary on the line joining the primaries and whose distance from the more massive primary is greater than the distance between the primaries, in the framework of restricted three-body problem for the Sun–Jupiter, Earth–Moon (relatively large mass ratio) and Saturn–Titan (relatively small mass ratio) systems is made. Two families of periodic orbits around the smaller primary are identified using the Poincaré surface of section method – family I (initially elliptical, gradually becomes egg-shaped with the increase in the Jacobi constant C and elongated towards the more massive primary) and family II (initially egg-shaped orbits elongated towards L₂ and gradually becomes elliptical with the increase in C). The family I in the Sun–Jupiter and Saturn–Titan systems contains two separatrix caused by third-order and fourth-order resonances, while the Earth–Moon system has only one separatrix which is caused by third-order resonances. Also in the Sun–Jupiter and the Saturn–Titan systems, family I merge with family II, around Jacobian constant 3.0393 and 3.0163, respectively, while in the Earth–Moon system, family II evolves separately from two different branches. The two branches merge at C = 3.184515. In the Earth–Moon system, the family II contains a separatrix due to third-order resonances which is absent in the other two systems.     

The International DORIS Service (IDS): Toward maturity

DORIS is one of the four space-geodetic techniques participating in the Global Geodetic Observing System (GGOS), particularly to maintain and disseminate the Terrestrial Reference Frame as determined by International Earth rotation and Reference frame Service (IERS). A few years ago, under the umbrella of the International Association of Geodesy, a DORIS International Service (IDS) was created in order to foster international cooperation and to provide new scientific products. This paper addresses the organizational aspects of the IDS and presents some recent DORIS scientific results. It is for the first time that, in preparation of the ITRF2008, seven Analysis Centers (AC’s) contributed to derive long-term time series of DORIS stations positions. These solutions were then combined into a homogeneous time series IDS-2 for which a precision of less than 10 mm was obtained. Orbit comparisons between the various AC’s showed an excellent agreement in the radial component, both for the SPOT satellites (e.g. 0.5–2.1 cm RMS for SPOT-2) and Envisat (0.9–2.1 cm RMS), using different software packages, models, corrections and analysis strategies. There is now a wide international participation within IDS that should lead to future improvements in DORIS analysis strategies and DORIS-derived geodetic products.     

微分对策理论及其研究现状分析

本文阐述了微分对策在经济和军事领域中的研究和应用,详尽地叙述了微分对策的分类,并采用定量和定性方法对微分对策进行了分析,指出了微分对策的研究难点,对发展趋势作了较为详细的探讨。     

Hilbert空间中严格伪压缩映像的强收敛定理

给出了一种求解严格伪压缩非自身映像不动点集上变分不等式的迭代算法，并证明了其强收敛性。此结果推广了姚永红和T．H．Kim等的研究结果。最后，进一步将结论推广到求解有限个严格伪压缩非自身映像公共不动点集上的变分不等式。     

终端区点融合进近程序设计方法研究

流量的增长导致终端区拥挤和航班延误,增大了管制压力和公司成本.以长沙黄花国际机场36号跑道为例,空城受限,4条航线汇聚一点,梯度曲折多变,航班排序难,指挥复杂度高.结合我国飞行程序设计和管制间隔要求,根据点融合的基本概念,设计跑道点融合进近程序,确定相关参数.对程序进行容量和下降梯度评估表明,静态容量可达到63架次/h,是当前运行最大流量的3.7倍;下降梯度得到明显改善,为连续下降实施奠定了基础.     

Revisiting Perspective-Taking: Can People Maintain Imagined Perspectives?

Abstract

Three experiments were conducted to examine whether people can adopt and maintain imagined perspectives in the absence of target information. The task used entailed providing information about an imagined perspective in advance of target information to examine whether this would facilitate perspective-taking performance and reduce or eliminate alignment effects that are commonly reported in the literature. The three experiments employed different types of spatial environments: an environment learned from navigating a computer screen (Experiment 1), and an immersive environment that was either remote (Experiment 2) or immediate (Experiment 3) at the time of retrieval. Across the three experiments, results showed that information about an imagined perspective can be utilized ahead of target information. Furthermore, they suggested that alignment effects can be reduced as a result of processing information about perspective ahead of target information, but only when reasoning about specific nonimmediate spatial relations (Experiments 1 and 2). Results are discussed in connection with previous findings on spatial updating and the organizational structure of spatial memory.     

基于Kriging模型插值的孔位修正策略

飞机装配时的孔位精度直接影响其最终装配质量，而待制孔零件易发生变形和整体偏移，因此一般通过基准孔信息对待制孔位进行补偿。提出一种基于Kriging插值的孔位修正方法，通过基准孔建立孔位理论坐标与实际偏差值的Kriging模型，进而预测待制孔的孔位偏差，并给出每个位置的预测标准误差，以指导基准孔的增添和布置。最后通过有限元和数值实验分别验证了零件在极限变形和整体平移旋转情况下该方法的有效性，实现了孔位估计误差小于0.3 mm。