含噪信号经验模式分解虚假分量识别方法

针对含噪信号Hilbert-Huang变换存在虚假分量,提出改进的奇异值分解(SVD)方法进行降噪,改进包含两个部分:一是利用重构相空间代替传统矩阵如Hankel矩阵,以去掉信号冗余,再者提出奇异值能量熵分量差分法,更易于定出重构奇异值阶次;二是提出了频谱比值法对虚假分量进行辨识,更有效辨识出虚假分量.首先利用经验模式分解(EMD)得到本征模式分量(IMF),识别并剔除趋势项,重构信号,然后进行SVD,重构降噪后的信号,消除虚假分量,最后进行时频分析.联合方法应用于含噪仿真信号,信噪比(signal noise ratio,SNR)提高了5.5%,虚假分量辨识率提高至100%,用于双跨转子故障振动信号,得到正确的时频结果,表明了所提方法识别含噪信号虚假分量的有效性.     

交会对接寻的段水平双脉冲交会轨道精确求解

基于考虑摄动影响的精确轨道动力学模型,对交会对接寻的段水平双脉冲交会轨道的精确求解方法进行了研究。提出了将控制脉冲的俯仰角近似转化为控制时刻的轨道幅角,从而调整脉冲控制时刻以消除径向速度增量的方法,精确求解首末水平双脉冲的启控时刻;引入导引终点位置偏差的比例控制方法,精确求解水平双脉冲的精确控制量。仿真结果表明,2轮整体迭代可获得首末水平脉冲控制时刻和控制量的精确值,脉冲水平特性达到俯仰角小于1°,导引终点相对位置精度达到10m,验证了该方法的正确性。     

Assessing the feasibility of involving gaseous products resulting from physicochemical oxidation of human liquid and solid wastes in the cycling of a bio-technical life support system

The study addresses the possible ways of involving gaseous products produced by “wet” incineration of human wastes mixed with H₂O₂ in an alternating electric field in the cycling of the physical model of a bio-technical life support system (BTLSS). The resulting gas mixture contains CO₂ and O₂, which are easily involved in the cycling in the closed ecosystem, and NH₃, which is unacceptable in the atmosphere of the BTLSS. NH₃ fixation has been proposed, which is followed by nitrification and involvement of the resulting products in the mass exchange of the closed system. Experiments have been performed to show that plants can be grown in the atmosphere resulting from the closing of the gas loop that includes a physicochemical installation and a growth chamber with plants representing the phototrophic compartment of the BTLSS. The results of the study suggest the conclusion that the proposed method of organic waste oxidation can be a useful tool in creating a physical model of a closed-loop integrated BTLSS.     

α、β相分布形态对TC11钛合金高温循环蠕变速率的影响

对TC1 1钛合金施行了不同的热处理制度 ,得到 3种组织形态 ,研究了不同的组织形态的高温循环蠕变。结果表明 ,晶间 β组织具有低的循环蠕变速率 ,而随最大应力的增加 ,蠕变速率增加快 ;而等轴组织和片状组织循环蠕变速率较高 ,但随应力的增加 ,蠕变速率增加较慢。分析认为 ,晶界滑移行为对高温循环蠕变有重要影响     

再入飞行器和模型转换雷诺数计算

本文采用近似的激波关系、球锥体压力分布、平衡气体状态方程、边界层厚度计算公式及转捩准则等,按照流管法计算了4种再入飞行器的外流转捩雷诺数和转捩距离,并给出了高硅氧、碳石英、碳碳球锥模型的转捩雷诺数范围,对再入飞行器和模型的计算结果作了分析和比较。     

用低纯原料制备电冰箱起动器PTCR的重要途经——热敏钛酸钡陶瓷第二相结晶

根据Al_2O_3-SiO_2系统相图,调整Al_2O_3,SiO_2添加剂比例,可在热敏钛酸钡陶瓷显微结构中形成莫来石结晶相,莫来石的形成改善了用国产低纯原料制备电冰箱起动器PTCR的性能。本文就莫来石第二相与PTCR性能关系进行了讨论。     

矩形截面弯管内气固两相流及对管壁磨损的数值分析

在便于描述矩形截面弯管流动的曲线坐标系中，计算了气固两相流，颗粒对管壁的磨损位置与磨损量。分析了弯管曲率、弯管安放方式、颗粒大小对磨损状况的影响。本文计算与实验数据比较，符合良好。     

Carrier phase prediction method for GNSS precise positioning in challenging environment

Since the signals of global navigation satellite system (GNSS) are blocked frequently in challenging environments, the discontinuous carrier phases seriously affect the application of GNSS precise positioning. To improve the carrier phase continuity, this paper proposes a carrier phase prediction method based on carrier open-loop tracking. In the open-loop tracking mode, the carrier numerically controlled oscillator (NCO) is controlled by the predicted Doppler, but not by the loop filter output. To improve the phase prediction effective time, accurate receiver clock drift estimation is studied in the prediction method. The phase prediction performance is tested on GNSS software receiver. In the phase prediction effective time tests, open-loop processes were set for the tested channel. The test results show that, when some satellite signals are blocked in 15?s, the probability of carrier phase error less than quarter cycles is more than 94%. In the real time kinematic (RTK) positioning tests, some satellite signals are blocked in 10–15?s repeatedly. The test results show that, the carrier phase continuity is basically not affected by the signal interruption, and the RTK can almost keep continuous centimeter-level positioning accuracy without re-fixing the integer ambiguity.     

航天飞机再入航迹初步设计的一种计算方法

本文给出一种由航天飞机质心位置和飞行速度随高度的变化值计算再入航迹其它运动参数的方法。用美国“哥伦比亚”号航天飞机轨道器的飞行数据验算表明,该方法不失为一种可供再入航迹初步设计中选用的简便算法。     

在回收容器再入中应用的空间系绳伸展长度的估计

空间系绳有可能取代化学推进装置而导致回收容器的再入返回.文章初步分析这种可能性,估计系绳的伸展长度.