膜式煤气表基本误差检定的不确定度评定

依据国家计量检定规程JJG5 77- 94《膜式煤气表》 ,用钟罩法检定膜式煤气表的示值基本误差 ,对产生其不确定度的各因素进行了分析和计算。     

制造误差对气体静压轴承涡流力矩影响分析方法研究

 采用有限元方法研究了制造误差对狭缝节流气体静压轴颈—止推轴承的涡流力矩的影响。对于轴颈—止推相连结构的气体轴承,通过相容变换进行统一编程计算;在离散化过程中,利用加权余量法将二阶偏微分方程降低一阶,放松了对插值函数连续度的要求,便于借助有限元技术分析狭缝节流气体静压轴承的流场参数。分析了狭缝气膜宽度误差和轴颈圆度误差对涡流力矩的影响,以及轴颈的不同安装角度、偏心等因素对涡流力矩的影响。经对比验证,有限元计算结果与实测结果基本一致,研究结果对于气体静压轴颈—止推轴承的设计、装配优化和性能预测有重要指导意义。     

面向对象的双轴混排加力涡扇发动机详细非线性实时仿真模型研究

本文就双轴加力涡扇发动机详细非线性实时仿真模型进行了研究。采用框架灵活方便、具有可扩展性的 VC 语言 ,在 P 45 0计算机上实现了一台双轴混排加力涡扇发动机的实时仿真 ,可准确模拟发动机及其部件的工作状况。发动机流路的平均计算时间为 0 .5 42 ms,一个工作点的计算时间小于 2 5 ms。此模型的建模方法具有通用性 ,可适用于其他类型发动机的实时建模要求。经在火力 /飞行 /推进综合控制仿真系统中的应用 ,证明此模型完全满足实时模拟真实发动机的要求     

强制偏流喷管的数值仿真

采用薄层Ｎ－Ｓ方程成功地求解了强制流喷管内的三维复杂流场，对通量项和压力项用Ｖａｎ Ｌｅｅｒ发展的矢通量分裂法进行了离散，对离散方程采用线超松弛方法迭代求解，在亚音速与超音速气流共同存在的出口边界分情况进行了处理。计算结果验证了强制偏喷管具有自动补偿外界压力变化的能力，与实验结果基本吻合。     

气相色谱法测定达连河水中的硝基苯

介绍了检测达连河水中硝基苯含量的方法,并就检测结果进行了分析.     

液氢液氧发动机喷管化学反应流数值模拟

用时间相关的半隐格式求解液氢液氧发动机喷管中的化学反应流动，考虑了６种燃烧产物，８个基元反应，得到了流动参数和产物的质量分数在流场中的分布，为发动机化学动力学损失计算和喷管热结构设计提供了必要数据。计算结果表明，采用半隐格式解决组分连续方程刚性引起的数值不稳定是有效的。     

一种模拟喷管二维流场的新方法

采用ＳＩＭＰＬＥ方法对固体火箭发动机喷管进行了纯气相流场的数值模拟。推导了建立在同位网格之上利用协变物理速度分量为计算变量的离散方程，采用协变物理速度分量推导压力修正方程，对密度采用一阶迎风格式插值，将ＳＩＭＰＬＥ方法扩大到计算可压流动。计算结果表明：本方法计算精度高，收敛速度快，程序编写简单。     

Magnetosphere Imaging Instrument (MIMI) on the Cassini Mission to Saturn/Titan

The magnetospheric imaging instrument (MIMI) is a neutral and charged particle detection system on the Cassini orbiter spacecraft designed to perform both global imaging and in-situ measurements to study the overall configuration and dynamics of Saturn’s magnetosphere and its interactions with the solar wind, Saturn’s atmosphere, Titan, and the icy satellites. The processes responsible for Saturn’s aurora will be investigated; a search will be performed for substorms at Saturn; and the origins of magnetospheric hot plasmas will be determined. Further, the Jovian magnetosphere and Io torus will be imaged during Jupiter flyby. The investigative approach is twofold. (1) Perform remote sensing of the magnetospheric energetic (E > 7 keV) ion plasmas by detecting and imaging charge-exchange neutrals, created when magnetospheric ions capture electrons from ambient neutral gas. Such escaping neutrals were detected by the Voyager l spacecraft outside Saturn’s magnetosphere and can be used like photons to form images of the emitting regions, as has been demonstrated at Earth. (2) Determine through in-situ measurements the 3-D particle distribution functions including ion composition and charge states (E > 3 keV/e). The combination of in-situ measurements with global images, together with analysis and interpretation techniques that include direct “forward modeling’’ and deconvolution by tomography, is expected to yield a global assessment of magnetospheric structure and dynamics, including (a) magnetospheric ring currents and hot plasma populations, (b) magnetic field distortions, (c) electric field configuration, (d) particle injection boundaries associated with magnetic storms and substorms, and (e) the connection of the magnetosphere to ionospheric altitudes. Titan and its torus will stand out in energetic neutral images throughout the Cassini orbit, and thus serve as a continuous remote probe of ion flux variations near 20R _S (e.g., magnetopause crossings and substorm plasma injections). The Titan exosphere and its cometary interaction with magnetospheric plasmas will be imaged in detail on each flyby. The three principal sensors of MIMI consists of an ion and neutral camera (INCA), a charge–energy–mass-spectrometer (CHEMS) essentially identical to our instrument flown on the ISTP/Geotail spacecraft, and the low energy magnetospheric measurements system (LEMMS), an advanced design of one of our sensors flown on the Galileo spacecraft. The INCA head is a large geometry factor (G ∼ 2.4 cm² sr) foil time-of-flight (TOF) camera that separately registers the incident direction of either energetic neutral atoms (ENA) or ion species (≥5^∘ full width half maximum) over the range 7 keV/nuc < E < 3 MeV/nuc. CHEMS uses electrostatic deflection, TOF, and energy measurement to determine ion energy, charge state, mass, and 3-D anisotropy in the range 3 ≤ E ≤ 220 keV/e with good (∼0.05 cm² sr) sensitivity. LEMMS is a two-ended telescope that measures ions in the range 0.03 ≤ E ≤ 18 MeV and electrons 0.015 ≤ E≤ 0.884 MeV in the forward direction (G ∼ 0.02 cm² sr), while high energy electrons (0.1–5 MeV) and ions (1.6–160 MeV) are measured from the back direction (G ∼ 0.4 cm² sr). The latter are relevant to inner magnetosphere studies of diffusion processes and satellite microsignatures as well as cosmic ray albedo neutron decay (CRAND). Our analyses of Voyager energetic neutral particle and Lyman-α measurements show that INCA will provide statistically significant global magnetospheric images from a distance of ∼60 R _S every 2–3 h (every ∼10 min from ∼20 R _S). Moreover, during Titan flybys, INCA will provide images of the interaction of the Titan exosphere with the Saturn magnetosphere every 1.5 min. Time resolution for charged particle measurements can be < 0.1 s, which is more than adequate for microsignature studies. Data obtained during Venus-2 flyby and Earth swingby in June and August 1999, respectively, and Jupiter flyby in December 2000 to January 2001 show that the instrument is performing well, has made important and heretofore unobtainable measurements in interplanetary space at Jupiter, and will likely obtain high-quality data throughout each orbit of the Cassini mission at Saturn. Sample data from each of the three sensors during the August 18 Earth swingby are shown, including the first ENA image of part of the ring current obtained by an instrument specifically designed for this purpose. Similarily, measurements in cis-Jovian space include the first detailed charge state determination of Iogenic ions and several ENA images of that planet’s magnetosphere.This revised version was published online in July 2005 with a corrected cover date.     

求解可压缩N－S方程的无粘－粘性分数步法

用按物理过程作时间分裂的无粘－粘性分数步法求解可压缩Ｎ－Ｓ方程，无粘步用高效欧拉算法解欧拉方程，粘性步用全隐格式解抛物方程；并采取了有效措施消除由分步法产生的时间和空间不相容性，文中给出了轴对称喷管内外流场的数值模拟结果。     

大瑞利数下二维Benard对流演化过程的DSMC仿真研究

利用DSMC（Direct Simulation Monte Carlo）方法研究了大Rayleigh（瑞利）数条件下稀薄气体的二维Benard对流的特性。考察了流动的非定常演化过程及若干流动特征量随时间的变化特征，得到了与实验较为一致的结论。计算结果表明，当流动控制参数不断增大时，二维Berard对流从热传导状态过渡到热对流状态表现出明显的非定常演化特征。最后当瑞利数增大到一定程度后，注动显示出混沌的特性。