掺Ce^3＋的碱土氟化物的紫外发光特性研究

研究了掺杂稀土离子Ce^3＋的碱土氟化物发光体LiXAlF6：Ce^3＋（X=Ca^2＋,Sr^2＋或Ba^2＋）,XBaAlF6：Ce^3＋（X=Li6＋,Na^＋或K^＋）及LiBaXF6：Ce^3＋（X=Al^3＋,Ga^3＋或In^3＋）的紫外发光特性。实验发现,在LiXAlF6=Ce^3＋中,随着X元素原子序数的增大,Ce^3＋的发光峰就向短波方向移动。首次研究了在XBaAlF6：Ce^3＋与LiBaXF6：Ce^3＋中的X元素的一价与三价离子对Ce^3＋发光的影响,发现这些一价与三价离子的原子序数的变化并不影响Ce^3＋的发射光谱的峰值,它们只在晶格中起着填隙和电荷补偿作用,这有利于Ce^3＋的发光,使发光强度有所增强。这些紫外发光可用来增强X射线影像板中所包含的储存辐射的发光体BaFBr：Eu“的发光,使X射线影像板的显像增强。     

浆料浸渍结合反应熔渗法制备2D C/SiC-Zr B_2复合材料

利用XRD,SEM,EDS研究浆料浸渍结合反应熔渗法制备2D C/SiC-ZrB2复合材料的组成与结构,并测定了复合材料的弯曲强度.结果表明:采用单向加压依次渗入ZrB2微粉和酚醛树脂,能很好地将ZrB2微粉和树脂渗入到纤维束间,但熔融Si难以渗入到试样内部,复合材料的开气孔率和室温弯曲强度分别为18.3%和110MPa.采用ZrB2浆料真空浸渍,沉积碳基体后进行熔融渗Si,复合材料的开气孔率和室温弯曲强度分别为5.5%和230MPa.     

Variation of ionospheric electron and ion temperatures during periods of minimum to maximum solar activity by the SROSS-C2 satellite over Indian low and equatorial latitudes

To study the variation of ionospheric electron and ion temperatures with solar activity the data of electron and ion temperatures were recorded with the help of Retarding Potential Analyzer payload aboard Indian SROSS-C2 satellite at an average altitude of ∼500 km. The main focuses of the paper is to see the diurnal, seasonal and latitudinal variations of electron and ion temperatures during periods of minimum to maximum solar activity. The ionospheric temperatures in the topside show strong variations with altitude, latitude, season and solar activity. In present study, the temperature variations with latitude, season and solar activity have been studied at an average altitude ∼500 km. The peak at sunrise has been observed during all seasons, in both electron and ion temperatures. Further, the ionospheric temperatures vary with latitude in day time. The latitudinal variation is more pronounced for low solar activity than for high solar activity.     

基于瞬时无功功率理论和模糊PID控制的三相不平衡补偿算法

为满足三相不平衡飞机电网的无功功率实时补偿要求,设计了一种新型的静止无功补偿器（SVC）控制系统。该系统采用瞬时无功功率理论来精确检测基波正序和负序电压、电流,并推导出补偿导纳的表达式;SVC的整体控制采用了开环和闭环控制相结合的控制算法,并在闭环控制算法中,提出了自适应非线性模糊控制器在无功补偿控制系统中的应用方案。该方案结合了模糊控制和PID控制2种方法的优点,根据系统状况改变PID控制器的参数,以达到更好的动态控制效果。仿真研究结果表明,该新型SVC控制系统对于提高功率因数和补偿三相不平衡,具有响应快、精度高的控制效果。     

质子和离子辐照对镁稀土合金 力学性能的影响

文章研究了质子和离子（氮离子）辐照对镁稀土（Mg-Zn-Y-Zr）合金拉伸性能、表面硬度及拉伸变形断裂行为的影响。经能量为170 keV,注量分别为5×1015 /cm2、1×1016 /cm2、2×1016 /cm2、1×1017 /cm2的质子或离子辐照后,合金的拉伸性能和拉伸断口形貌没有发生显著变化,表明质子和离子辐照对Mg-Zn-Y-Zr合金宏观力学性能的影响有限,这与辐照粒子（质子或离子）对合金的穿透深度浅有关。纳米显微硬度测试和扫描分析结果显示,经氮离子辐照后,Mg-Zn-Y-Zr合金被辐照面表层发生了一定程度的硬化,纳米显微硬度随着辐照注量的增加而逐渐增加,而质子辐照的硬化效果不明显。     

基于LMI的模糊飞控系统设计

建立了飞控系统的模糊模型,通过采用线性矩阵不等式LMI(Linear Matrix Inequality)得到了一种既可保证模糊系统全局渐近稳定又能将闭环极点配置在期望区域的模糊控制系统的设计方法.对用该方法设计的纵向模糊飞控系统进行了仿真和鲁棒性验证.仿真结果表明所设计系统满足既定的性能指标要求且具有较好的鲁棒性.      

离子推进技术及其发展状况

概述了离子推力器的工作原理并详细介绍了美国、欧洲、日本、俄罗斯等一些离子推进技术先进国家在该领域的研究进展及实际应用状况。指出了目前离子推进技术发展尚需解决的关键技术及我国在这一技术领域发展相对缓慢、需积极开展国际合作,进一步推动我国离子推进技术的研制与开发的现实状况。     

Involvement of nitric oxide in the mechanism of biochemical alterations induced by simulated microgravity in Microcystis aeruginosa

Simulated microgravity (SMG) can inhibit proliferation and enhance microcystin production of Microcystis aeruginosa. We investigated the role of nitric oxide (NO) in regulating the SMG induced changes of proliferation, photochemical system II photochemical activity, pigment, soluble protein and microcystin production in M. aeruginosa. M. aeruginosa was exposed to 0.1 mM sodium nitroprusside (SNP, NO donor) or 0.02 mM 2-(4-carboxyphenyl)-4, 4, 5, 5-tetramethylimidazoline-1-oxyl-3-oxide (c-PTIO, NO scavenger) alone or in combination with SMG for 48 h. SMG and SNP inhibited the growth of M. aeruginosa while c-PTIO had no effect on cell number. As to yield, the negative effect of SMG was augmented by SNP and suppressed by c-PTIO. The intracellular concentrations of chlorophyll a, carotenoid, phycocyanin, soluble protein and microcystin were increased by SMG after 48 h. The effects of SMG on these metabolic processes could be enhanced by SNP and be partly eliminated by c-PTIO. Moreover, SNP and c-PTIO only functioned in these biochemical processes under SMG, unlike in the regulation of cell proliferation and yield. These results showed that the effects of SMG could be enhanced by adding exogenous NO and be mitigated by scavenging endogenous NO, revealing the involvement of NO in the changes in biochemistry processes induced by SMG in M. aeruginosa.     

LiNi0.8Co0.15Al0.05O2(NCA)正极材料的磷酸表面改性

针对新一代空间型号产品对储能电源提出的更高需求,提出采用表面改性的方法提升LiNi0.8Co0.15Al0.05O2（NCA）正极材料在锂离子电池中的循环稳定性。通过采用磷酸（H3PO4）对NCA正极材料进行表面处理,H3PO4会与NCA颗粒表面的含锂碱性物质发生反应,从而在NCA颗粒表面生成稳定且导电性良好的Li3PO4界面层。循环以及阻抗测试结果表明,经H3PO4表面处理的NCA材料组装电池循环50次后电池容量为170.5mA·h/g,容量保持率达到94%以上,界面阻抗得到抑制。H3PO4表面处理有效抑制了NCA颗粒表面碱性残留对电化学性能的不良影响,提升了界面稳定性,获得了更好的循环性能。     

基于Ti/TiN薄膜传感器的飞机金属结构裂纹监测

针对飞机金属结构在服役过程中的裂纹实时监测需求,提出一种Ti/TiN导电薄膜与电位监测原理相结合的结构裂纹监测研究方案。首先,通过真空离子镀膜技术在结构易于出现裂纹的部位制备了Ti/TiN薄膜传感器。然后,进行了传感器膜层与2A12-T4铝合金基体的损伤一致性验证。结果表明,传感器与基体具有良好的损伤一致性。最后,进行了两组基于Ti/TiN薄膜传感器的裂纹监测试验,主要研究结构裂纹与传感器电位之间的相互关系,并对两组电位监测结果进行对比。结果表明,通过分析Ti/TiN薄膜传感器电位的变化可以实现对2A12-T4铝合金结构裂纹萌生和扩展进行实时监测,两组试验的电位监测结果具有良好的重复性。