添加Ni+Nb中间层的钛合金与不锈钢扩散焊工艺研究

分别采用常规工艺和阶梯状工艺的方法,对添加Ni+Nb复合中间层的TC4钛合金与1Cr18Ni9Ti不锈钢真空扩散焊进行了研究.利用光学显微镜(OM)、扫描电镜(SEM)以及能谱分析(EDS)对接头的组织结构、元素分布进行了分析,测试了接头的力学性能并分析了断口形貌和元素分布.结果表明,通过添加Ni+Nb中间层成功阻止了...     

Erosion of a Polyimide Material Exposed to Simulated Atomic Oxygen Environment

Oxygen plasma source generated by thermal cathode filament discharge has been used to study the erosion process of polyimide (PI) materials in atomic oxygen (AO) environment, and their mass loss, surface morphology and surface chemical compositions have been examined by scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS) after exposure to incremental AO flux. The data indicate that the physical adsorption of AO at the samples' surface results in the increase of oxygen concentration when polyimide is exposed to AO flux. Then selective chemical reactions of groups of polyimide materials with AO yield volatile organic compounds, sample mass loss is on linear increase and carpet-like surface morphology forms. In the initial exposure to AO, the reaction occurs mainly between AO and carbon in specific location of aromatic ring, then the reaction rate of C=O groups gradually increases. After AO exposure, the oxygen concentration increases while nitrogen and carbon concentration decreases. Reaction rate of groups containing nitrogen is slower compared with carbon and oxygen.     

磁悬浮反作用飞轮热设计方法与实验研究

 作为新型航天器姿态控制执行机构,磁悬浮反作用飞轮工作在高真空环境下且转子完全悬浮,使得热量不易散出,故需要对飞轮进行温度场计算并进行热优化设计。为此,提出一种有限元与热网络模型相结合的优化热设计方法:首先利用有限元法计算温度场分布;然后对不符合温度要求的部件建立热网络模型,分析影响温度的因素,提出优化措施。该方法具有计算精度高、优化速度快的特点。将该方法应用于某样机的热优化设计中,使飞轮的最高温度由121.6 ℃降到了52.7 ℃。对经热设计前后的两台磁悬浮反作用飞轮的实验研究证明了热设计的正确性,从而为磁悬浮飞轮系统的结构设计和热设计奠定了基础。     

NiCrAlYSi涂层/DD6单晶高温合金界面再结晶和互扩散行为

采用电子束物理气相沉积(EB-PVD)在单晶高温合金DD6基体上沉积NiCrAlYSi涂层.利用X射线衍射(XRD)、扫描电镜(SEM)、能谱仪(EDS)以及透射电镜(TEM)等研究了高温扩散过程中NiCrAlYSi/DD6的界面再结晶和互扩散行为.研究结果表明合金表面喷砂处理后的涂层试样经1 323 K真空热处理4 ...     

卫星振动试验中推力的估算方法

准确预估规定试验条件下卫星振动试验所需推力对于试验的设计与实施具有重要意义。文章在常规卫星振动试验需用推力估算方法的基础上,结合具体的小卫星应用实例提出了支反力分析预示法和类比相似结构卫星推力的方法来估算卫星振动试验需用推力。通过与实际振动试验推力数据对比,文章给出了卫星振动试验需用推力估算方法的实用评估结论。     

固液火箭冲压发动机燃烧室流场数值仿真

固液火箭冲压发动机通过固液两种燃料匹配工作,相比传统的固体火箭冲压发动机和液体燃料冲压发动机具有较为明显的优势.基于离散相模型和单步反应模型,采用Fluent 对设计点飞行参数下,不同结构和不同工况条件下的燃烧室两相反应流场进行了数值仿真.结果表明,燃气发生器喷管参数和进气道进气角度主要影响空气与燃气流的撞击以及头部区...     

超高速撞击下PTFE/Al含能材料薄板的载荷特性分析

不同于传统惰性材料的空间碎片防护结构,含能材料防护结构在超高速撞击下的冲击起爆特性是其防护能力得以提高的根本原因。PTFE/Al含能材料防护结构的冲击起爆特性改变了弹丸强冲击载荷下的破碎机制,弹丸内部的冲击压力对于分析含能材料在超高速撞击下的防护机理具有重要意义。对超高速撞击试验中回收的PTFE/Al防护结构后板进行损伤特性分析,获得了对应速度条件下弹丸的破碎特性。基于一维冲击波理论,分析PTFE/Al靶板在超高速撞击条件下的冲击响应过程,结合考虑化学反应效率的热化学反应模型,获得了弹丸在碰撞与爆炸联合作用下的载荷特性,通过与试验结果对比验证,获得该材料完全反应的临界撞击速度约为1800 m/s,弹丸的临界破碎速度为2875 m/s,小于铝防护结构中对应的临界破碎速度。给出了弹丸在PTFE/Al、铝两种防护结构中产生相同冲击压力时对应的临界速度,分别为弹道段的800 m/s和破碎段的3580 m/s。     

国外固体推进剂及其粘结界面贮存老化研究进展

对国外固体推进剂及其粘结界面贮存老化性能的研究进展和最新研究成果进行了综述。介绍了国外在固体推进剂及其粘结界面老化与监测的情况,展望了该研究领域未来的发展趋势,认为以光谱学和埋入微型传感器等方法为代表的固体推进剂的无损评估技术将是今后研究的重点。     

Competing effects of surface catalysis and ablation in hypersonic reentry aerothermodynamic environment

Under hypersonic flow conditions, the complicated gas-graphene interactions including surface catalysis and surface ablation would occur concurrently and intervene together with the thermodynamic response induced by spacecraft reentry. In this work, the competing effects of surface heterogeneous catalytic recombination and ablation characteristics at elevated temperatures are investigated using the Reactive Molecular Dynamics(RMD) simulation method. A GasSurface Interaction(GSI) model is establi...     

Development process of muzzle flows including a gun-launched missile

Numerical investigations on the launch process of a gun-launched missile from the muzzle of a cannon to the free-flight stage have been performed in this paper. The dynamic overlapped grids approach are applied to dealing with the problems of a moving gun-launched missile. The high-resolution upwind scheme(AUSMPW+) and the detailed reaction kinetics model are adopted to solve the chemical non-equilibrium Euler equations for dynamic grids. The development process and flow field structure of muzzle flows including a gun-launched missile are discussed in detail.This present numerical study confirms that complicated transient phenomena exist in the shortly launching stages when the gun-launched missile moves from the muzzle of a cannon to the freeflight stage. The propellant gas flows, the initial environmental ambient air flows and the moving missile mutually couple and interact. A complete structure of flow field is formed at the launching stages, including the blast wave, base shock, reflected shock, incident shock, shear layer, primary vortex ring and triple point.