集中式平台自由销售代码共享研究与应用

在对目前世界范围内,航空公司之间普遍采用的代码共享合作方式进行分析的基础上,结合中国民航的实际情况,提出了同时使用中国民航传统集中式订座系统平台,系统内两家航空公司之间自由销售模式的代码共享系统解决方案,并对该设计方案的高灵活性、低成本消耗等特点进行了具体的分析。     

临近空间可变形滑翔飞行器轨迹优化与性能分析

针对临近空间滑翔飞行器的变形需求，提出一种具有较高环境适应性的伸缩式可变形滑翔飞行器(MGV)，建立了含有冗余控制变量的MGV轨迹优化模型，利用伪谱法量化分析了MGV在射程覆盖能力、规避绕飞能力和末段打击能力三方面的性能收益，得到了飞行过程中的最优控制律和最优变形律，可指导制定变形策略和设计变形控制系统，为滑翔飞行器的后续发展和变形飞行器的相关研究提供参考。     

LARES successfully launched in orbit: Satellite and mission description

On February 13th 2012, the LARES satellite of the Italian Space Agency (ASI) was launched into orbit with the qualification flight of the new VEGA launcher of the European Space Agency (ESA). The payload was released very accurately in the nominal orbit. The name LARES means LAser RElativity Satellite and summarises the objective of the mission and some characteristics of the satellite. It is, in fact, a mission designed to test Einstein's General Relativity Theory (specifically ‘frame-dragging' and Lense-Thirring effect). The satellite is passive and covered with optical retroreflectors that send back laser pulses to the emitting ground station. This allows accurate positioning of the satellite, which is important for measuring the very small deviations from Galilei–Newton's laws. In 2008, ASI selected the prime industrial contractor for the LARES system with a heavy involvement of the universities in all phases of the programme, from the design to the construction and testing of the satellite and separation system. The data exploitation phase started immediately after the launch under a new contract between ASI and those universities. Tracking of the satellite is provided by the International Laser Ranging Service. Due to its particular design, LARES is the orbiting object with the highest known mean density in the solar system. In this paper, it is shown that this peculiarity makes it the best proof particle ever manufactured. Design aspects, mission objectives and preliminary data analysis will be also presented.     

CFDP协议中延迟NAK文件传输时间分析与仿真

未来的深空通信需要一个鲁棒的、有效与可靠的文件传输协议,在研究CCSDS提出的CFDP协议基础上,针对延迟NAK模式提出了一种新的分析方法。在保证吞吐量的前提下,对ARQ定时器优化设置,导出了平均文件传输时间的理论表达式。在单跳直连链路中,对不同条件下的平均文件传输时间进行了仿真与数值分析。仿真结果表明平均文件传输时间与PDU错误概率、PDU数目及单向传播时间等有密切关系。随机仿真与理论分析具有很好的一致性。     

实线性赋范空间中算子的Fermat定理

本文给出并证明了文中的定理１，该定理是经典分析中的Ｆｅｒｍａｔ定理在现代分析学中的合理推广。据此又给出了一个中值公式在抽象分析中成立的充分条件。最后，指出了经典分析中的中值定理在抽象分析中不成立。文中各项内容相结合，较深刻地说明了中值定理在抽象分析学中不成立的原因。     

3种气动弹性状态空间建模方法的对比

研究气动弹性状态空间建模的3种常用方法:最小二乘(LS)法、最小状态(MS)法和拟合状态空间(MA)法.用2个算例从颤振和频响特性角度分析和总结了它们的建模特点.在气动力有理函数拟合建模方法(LS法、MS法)研究中,着重分析滞后根的影响;在MA法的研究中,讨论了建模的特点.最后,系统对比了3种建模方法的建模效果及使用原则,为这些方法的工程应用提供参考.仿真计算结果表明,MS法建立的模型阶数低、精度适中且使用方便,是比较好的方法,而MA法建立的模型频响特性与参考结果最为接近.     

Viability of barley seeds after long-term exposure to outer side of international space station

Barley seeds were exposed to outer space for 13 months in a vented metal container without a climate control system to assess the risk of physiological and genetic mutation during long-term storage in space. The space-stored seeds (S0 generation), with an 82% germination rate in 50 seeds, lost about 20% of their weight after the exposure. The germinated seeds showed normal growth, heading, and ripening. The harvested seeds (S1 generation) also germinated and reproduced (S2 generation) as did the ground-stored seeds. The culm length, ear length, number of seed, grain weight, and fertility of the plants from the space-stored seeds were not significantly different from those of the ground-stored seeds in each of the S0 and S1 generation. Furthermore, the S1 and S2 space-stored seeds respectively showed similar β-glucan content to those of the ground-stored seeds. Amplified fragment length polymorphism analysis with 16 primer combinations showed no specific fragment that appears or disappears significantly in the DNA isolated from the barley grown from the space-stored seeds. Though these data are derived from nine S0 space-stored seeds in a single exposure experiment, the results demonstrate the preservation of barley seeds in outer space for 13 months without phenotypic or genotypic changes and with healthy and vigorous growth in space.     

Estimation of Galactic Cosmic Ray exposure inside and outside the Earth’s magnetosphere during the recent solar minimum between solar cycles 23 and 24

The evidently low solar activity observed between solar cycles 23 and 24 during the years 2008–2010 led to a substantial increase in the Galactic Cosmic Ray (GCR) intensity in comparison with preceding solar minima. As the GCRs consist of highly-ionizing charged particles having the potential to cause biological damage, they are a subject of concern for manned missions to space. With the enhanced particle fluxes observed between 2008 and 2010, it is reasonable to assume that the radiation exposure from GCR must have also increased to unusually high levels. In this paper, the GCR exposure outside and inside the Earth’s magnetosphere is numerically calculated for time periods starting from 1970 to the end of 2011 in order to investigate the increase in dose levels during the years 2008–2010 in comparison with the last three solar minima. The dose rates were calculated in a water sphere, used as a surrogate for the human body, either unshielded or surrounded by aluminium shielding of 0.3, 10 or 40 g/cm².     

An experimental study of elastic properties of dragonfly-like flapping wings for use in biomimetic micro air vehicles (BMAVs)

This article studies the elastic properties of several biomimetic micro air vehicle (BMAV) wings that are based on a dragonfly wing. BMAVs are a new class of unmanned micro-sized air vehicles that mimic the flapping wing motion of flying biological organisms (e.g., insects, birds, and bats). Three structurally identical wings were fabricated using different materials: acrylonitrile butadiene styrene (ABS), polylactic acid (PLA), and acrylic. Simplified wing frame structures were fabricated from these materials and then a nanocomposite film was adhered to them which mimics the membrane of an actual dragonfly. These wings were then attached to an electromagnetic actu-ator and passively flapped at frequencies of 10–250 Hz. A three-dimensional high frame rate imag-ing system was used to capture the flapping motions of these wings at a resolution of 320 pixels × 240 pixels and 35000 frames per second. The maximum bending angle, maximum wing tip deflection, maximum wing tip twist angle, and wing tip twist speed of each wing were measured and compared to each other and the actual dragonfly wing. The results show that the ABS wing has considerable flexibility in the chordwise direction, whereas the PLA and acrylic wings show better conformity to an actual dragonfly wing in the spanwise direction. Past studies have shown that the aerodynamic performance of a BMAV flapping wing is enhanced if its chordwise flexibility is increased and its spanwise flexibility is reduced. Therefore, the ABS wing (fabricated using a 3D printer) shows the most promising results for future applications.     

Simulation of streamwise vortices at the flaps of re-entry vehicles

The present study investigates separated flows in the flap region of the X-38 re-entry demonstrator with respect to the heat loads downstream reattachment induced by streamwise vortices. In a first step generic numerical flow simulations of turbulent ramp configurations with artificially induced vortex disturbances are compared with wind tunnel data of the Ludwieg tube facility in Göttingen (RWG). The results allow insight into the perturbed flow field, the associated flow topology and the influence of different flow parameters that affect the perturbations. For numerical resolution of streamwise vortices in the boundary layer of re-entry vehicles local grids are generated around the flaps of the X-38 vehicle. Extensive studies of arranging and refining the local grids demonstrate good grid convergence. For laminar cases and cases with fixed transition vortex effects on the heat transfer are observed with and without artificial vortex excitation.

Zusammenfassung

Ziel der vorgelegten Studie ist die Untersuchung abgelöster Strömungen im Klappenbereich des X-38 Wiedereintrittsdemonstrators hinsichtlich der durch Längswirbel entstehenden thermischen Belastungen stromab der Anlegelinie. Im ersten Schritt werden turbulente generische Rampenkonfiguratiorien mit künstlich induzierten Wirbelstörungen mit Windkanaldaten des Ludwierohrkanals in Göttingen (RWG) verglichen. Die Ergebnisse erlauben einen Einblick in die Störströmung, der zugehörige Strömungstopologie und der Einflüsse verschiedener Parametervariationen auf die Störströmung. Zur numerischen Auflösung der Längswirbel in der Grenzschicht von Wiedereintrittsvehikeln wurden lokale Netze um die X-38 Klappen generiert. Ausführliche numerische Studien nach Umordnung und Verfeinerung der lokalen Netze zeigen eine gute Netzkonvergenz der Ergebnisse. In laminaren Fällen und solchen mit fester Transition wurden Wirbeleinflüsse auf den Wärmestrom mit und ohne künstliche Wirbelanregung beobachtet.