面向深空探测的30cm离子推力器寿命预估

为评价30cm离子推力器的寿命,提出了有限寿命考核结合栅极仿真模型的推力器寿命预估方法,利用粒子-蒙特卡洛（PIC-MCC）方法建立了栅孔溅射腐蚀模型,开展了30cm离子推力器寿命预估研究,分析了栅孔刻蚀速率、单孔电场及离子引出特性,给出了30cm推力器寿命预估值。结果表明,栅孔直径仿真与实测值一致性较好,误差在20%以内,基于每个寿命小节栅孔实测值对模型的修正是有效的;根据仿真结果,10000h寿命考核后,减速栅最先失效,30cm离子推力器在最大功率（3kW）工况下预估寿命为37540h,能够满足小天体探测任务对电推进系统的长寿命需求。     

基于谷歌地球的仪表飞行程序

在Google Earth的三维地形数据的基础上,建立了完整的计算机辅助仪表飞行程序设计系统,在GoogleEarth上绘制出飞行程序保护区。并建立机场数据库,存储机场数据以及保护区各重要位置点数据,导入AUTOCAD,完成AUTO CAD出图。实现计算机辅助飞行程序设计。     

氙离子推力器束流分布特性研究

建立了离子推力器束流分布的高斯模型,以200mm氙离子推力器为例,在不同工作环境下对推力器束流分布进行了数值模拟,并通过试验测量了推力器引出切面不同位置(轴向z=50mm,z=100mm)下的径向束电流密度和束离子密度分布。通过对数值模拟结果与试验测量结果的比较,误差为17%,认为数值模拟结果与试验测量结果吻合较好。表明离子推力器引出束流呈轴对称分布,在推力器出口附近,束离子密度很大,越往下游,密度越小且束流出现发散。     

一种地球同步自旋卫星红外弦宽差分定姿方法

 提出了一种定点后地球同步自旋卫星姿态确定方法,推导了它的计算公式。充分利用了定点后卫星相对地球位置固定不变的特点,只利用一个参考矢量和卫星的位置信息,就可以确定卫星的姿态,完全消除了传统定姿态方法的几何条件限制。由于本方法姿态计算过程中利用的是星上红外地球敏感器测量数据的差分值,消除了测量数据中系统差对定姿精度的影响,使定姿精度提高到0.01°,实际工程应用效果进一步证明了该算法的正确性和精度。     

超低轨道卫星应用离子电推进技术方案

低地球轨道大气环境对诸如科学探测和对地观测卫星的阻尼作用十分明显,而且阻尼随太阳和地磁活动以及昼夜、季节交替变化范围宽.为了保证卫星轨道精度或飞行状态满足任务要求,需要利用推进系统对卫星受到的阻尼进行实时或间歇式补偿以实现轨道或飞行状态的保持.针对轨道高度220～268 km的无拖曳飞行和轨道维持应用,基于卫星轨道阻尼...     

双太阳翼GEO卫星在轨角动量管控方法

地球同步轨道(GEO)卫星在轨的主要环境干扰力矩为太阳光压力矩和重力梯度力矩,干扰力矩的累积效应表现为飞轮转速的变化,需要通过外力矩进行角动量卸载避免飞轮饱和。由于GEO磁场极弱,卫星无法使用磁力矩卸载,只能通过喷气卸载,而喷气将对卫星轨道产生影响,因此需要尽可能延长卸载周期。针对配置双对称太阳电池阵GEO卫星的角动量管控需求,首先建立卫星在惯性空间中角动量积累模型,并映射到卫星本体系中,得到本体系中的角动量变化规律。通过飞轮在轨转速遥测数据,精确辨识获取环境干扰力矩特征参数,获得真实可靠的干扰模型。以角动量卸载周期最长为原则,基于在轨环境干扰模型制定角动量管控策略,并准确预估下次角动量卸载时间。经在轨数据处理与分析表明:提出的角动量管控策略,可有效将飞轮的角动量卸载周期提升为原来的2倍,有效提升卫星在轨应用效能,具有实际工程意义。     

Early effects of low dose C ion or X-ray irradiation on human peripheral blood lymphocytes

The aim of this study was to estimate the acute effects of low dose ¹²C⁶⁺ ions or X-ray radiation on human immune function. The human peripheral blood lymphocytes (HPBL) of seven healthy donors were exposed to 0.05 Gy ¹²C⁶⁺ ions or X-ray radiation and cell responses were measured at 24 h after exposure. The cytotoxic activities of HPBL were determined by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT); the percentages of T and NK cells subsets were detected by flow cytometry; mRNA expression of interleukin (IL)-2, tumor necrosis factor (TNF)-α and interferon (IFN)-γ were examined by real time quantitative RT-PCR (qRT-PCR); and these cytokines protein levels in supernatant of cultured cells were assayed by enzyme-linked immunosorbent assays (ELISA). The results showed that the cytotoxic activity of HPBL, mRNA expression of IL-2, IFN-γ and TNF-α in HPBL and their protein levels in supernatant were significantly increased at 24 h after exposure to 0.05 Gy ¹²C⁶⁺ ions radiation and the effects were stronger than observed for X-ray exposure. However, there was no significant change in the percentage of T and NK cells subsets of HPBL. These results suggested that 0.05 Gy high linear energy transfer (LET) ¹²C⁶⁺ radiation was a more effective approach to host immune enhancement than that of low LET X-ray. We conclude that cytokines production might be used as sensitive indicators of acute response to LDI.     

ATC计算机系统的地线系统及机房防火措施

在计算机系统的接地系统中,一些问题至今尚无定论,本文结合几个计算机系统安装调试的经验,及现有的ATC雷达模拟系统实体,就机房屏蔽地线、防雷击地线、交流地线、系统地线给予介绍和简单的论述,并给出一些经验值,还说明了直流地悬空的危害和地桩的埋设方法。另外,简要介绍了机房的防火设施,以便有关单位参考。     

AerMet100钢的研究与发展

以AerMet100钢专利和AMS标准的变迁为基础,结合近年来国外AerMet100钢研究内容和材料院相关的研究工作,理出提高AerMet100钢断裂韧度研究的思路.不断提高纯洁度是AerMet100钢断裂韧度提高的重要条件之一;通过多元微量稀土元素改变杂质元素的状态和空间分布,可以有效减少杂质元素对断裂韧度的危害;热处理形成的稳定的逆转变奥氏体对断裂韧度起到积极作用.     

Electrolytic Passivation of Nitinol Shape Memory Alloy in Different Electrolytes

The corrosion behavior of the nitinol alloy was studied in various corrosion media of different Cl–ion concentrations. The results demonstrate that the Cl–ion concentration has significant influences on the corrosion behavior of the nitinol alloy. In order to enhance the corrosion resistance, protective films were generated on the surface of the nitinol alloy by means of the electrochemical passivation method, for which five different electrolytic solutions were investigated. The surface analysis indicates full growth of all samples pas-sivated in the different electrolytic solutions with layers, however, showing different morphological features. Without any defects like micro-cracks and pores, the surface of the samples passivated in the molybdate solution turns out smoother and denser than those pas-sivated in other solutions. It is shown that the electro-chemical passivation will reduce Ni content but increase Ti content in the surface, reaching the Mole ratio of Ti:Ni=9.01:1 on the outermost surface. Potentiodynamic polarization test demonstrates that the samples electrochemically passivated in the molybdate solution present a significant increase in breakdown potential due to titanium enrichment on the outermost surface.