面向空间目标相对轨道确定的编队优化方法

针对提高空间目标相对轨道确定精度的问题，研究了在主航天器轨道运动受限时，通过设计和优化辅航天器相对轨道要素的航天器编队优化方法。首先，介绍了基于扩展卡尔曼滤波的双视线测量相对轨道确定方法；之后，通过研究双视线测量下的空间目标定位误差变化规律，得到了减小定位误差的角度条件；然后，通过分析该角度条件和辅航天器相对轨道要素的关系，设计并采用遗传算法优化了辅航天器相对轨道；最后，数学仿真结果表明，设计的编队可保证目标相对位置估计误差收敛，优化后的编队可使目标相对位置估计误差减小至0.3 km且不超过1.2 km。     

Precise orbit determination and precision comparison for FY3C and FY3D with receiver antenna GPS and BDS PCV using spaceborne BDS and GPS observation data

The FY3C and FY3D satellites were equipped with global navigation satellite occultation detector (GNOS) receivers that received both GPS and BDS-2 signals. For further improving precise orbit determination (POD) precisions, we estimated receiver GPS and BDS signal phase center variations (PCV) models with 2° and 5° resolutions and set the different weights for GPS and BDS-2 observations in the combined POD. The BDS-based POD precision using BDS-2 satellite antenna phase center offset (PCO) values from the China Satellite Navigation Office (CSNO) are not as accurate as those obtained from the International GNSS Service (IGS) Multi-GNSS experiments project (MGEX). The estimated receiver GPS and BDS PCV models with 2° and 5° resolutions were estimated from the GPS phase residuals of GPS-based POD and BDS phase residuals of combined POD, respectively. In most cases, the POD precisions using the estimated PCVs with 2° resolution are superior to those with 5° resolution. The precisions of the BDS-based POD and combined POD were both improved by introducing the receiver BDS PCV models. The weighting for GPS and BDS-2 observations can further improve the precision of the combined POD. The tested results of selected weights are better than those with equal weight in the combined POD. The experiment results show that orbital precisions of FY3C are worse than those of FY3D.     

Orbit determination of BeiDou navigation satellite system maneuvered satellites based on instantaneous velocity pulses parameters

The BeiDou navigation satellite system (BDS) comprises geostationary earth orbit (GEO) satellites as well as inclined geosynchronous orbit (IGSO) and medium earth orbit (MEO) satellites. Owing to their special orbital characteristics, GEO satellites require frequent orbital maneuvers to ensure that they operate in a specific orbital window. The availability of the entire system is affected during the maneuver period because service cannot be provided before the ephemeris is restored. In this study, based on the conventional dynamic orbit determination method for navigation satellites, multiple sets of instantaneous velocity pulses parameters which belong to one of pseudo-stochastic parameters were used to simulate the orbital maneuver process in the orbital maneuver arc and establish the observed and predicted orbits of the maneuvered and non-maneuvered satellites of BeiDou regional navigation satellite system (BDS-2) and BeiDou global navigation satellite system (BDS-3). Finally, the single point positioning (SPP) technology was used to verify the accuracy of the observed and predicted orbits. The orbit determination accuracy of maneuvered satellites can be greatly improved by using the orbit determination method proposed in this paper. The overlapping orbit determination accuracy of maneuvered GEO satellites of BDS-2 and BDS-3 can improve 2–3 orders of magnitude. Among them, the radial orbit determination accuracy of each maneuvered satellite is basically better than 1 m. simultaneously, the combined orbit determination of the maneuvered and non-maneuvered satellites does not have a great impact on the orbit determination accuracy of the non-maneuvered satellites. Compared with the multi GNSS products (indicated by GBM) from the German Research Centre for Geosciences (GFZ), the impact of adding the maneuvered satellites on the orbit determination accuracy of BDS-2 satellites is less than 9 %. Furthermore, the orbital recovery time and the service availability period are significantly improved. When the node of the predicted orbit is traversed approximately 3 h after the maneuver, the accuracy of the predicted orbit of the maneuvered satellite can reach that of the observed orbit. The SPP results for the BDS reached a normal level when the node of the predicted orbit was 2 h after the maneuver.     

基于基线长度加权的GNSS多天线姿态测量方法

GNSS可用于获取动态载体的姿态信息，为提高其姿态测量精度，提出一种基于基线长度信息对最小二乘姿态解算方法进行加权处理，改进了最小二乘姿态解算方法，同时通过船载实验验证了该方法的可用性。实验结果表明：在船载动态实验中，当基线长度存在明显差异时，加权最小二乘法较等权最小二乘法在精度上明显提高，其中横滚角的精度提高了13 %。     

Performance assessment of real-time orbit determination for the Haiyang-2D using onboard BDS-3/GPS observations

The Global Navigation Satellite System (GNSS) receivers equipped on the Haiyang-2D (HY-2D) satellite is capable of tracking the signals of both the third generation of BeiDou satellite navigation System (BDS-3) and the Global Positioning System (GPS), which make it feasible to assess the performance of real-time orbit determination (RTOD) for the HY-2D using onboard GNSS observations. In this study, the achievable accuracy and convergence time of RTOD for the HY-2D using onboard BDS-3 and GPS observations are analyzed. Benefiting from the binary-offset-carrier (BOC) modulation, the BDS-3 C1X signal includes less noise than the GPS C1C signal, which has the same signal frequency and chipping rate. The root mean squares (RMS) of the noises of C1X and C1C code measurements are 0.579 m and 1.636 m, respectively. Thanks to a ten-times higher chipping rate, the code measurements of BDS-3 C5P, GPS C1W and C2W are less noisy. The RMS of code noises of BDS-3 C5P, GPS C1W, and C2W are 0.044 m, 0.386 m, and 0.272 m, respectively. For the HY-2D orbit, the three-dimensional (3D) and radial accuracies can reach 31.8 cm and 7.5 cm with only BDS-3 observations, around 50 % better than the corresponding accuracies with GPS. Better performance of the BDS-3 in RTOD for the HY-2D is attributed to the high quality of its broadcast ephemeris. When random parameters are used to absorb ephemeris errors, substantial improvement is seen in the accuracy of HY-2D orbit with either BDS-3 or GPS. The 3D RMS of HY-2D orbit errors with BDS-3 and GPS are enhanced to 23.1 cm and 33.6 cm, and the RMS of the radial components are improved to 6.1 cm and 13.3 cm, respectively. The convergence time is 41.6 and 75.5 min for the RTOD with BDS-3 and GPS, while it is reduced to 39.2 and 27.4 min after the broadcast ephemeris errors are absorbed by random parameters. Overall, the achievable accuracy of RTOD with BDS-3 reaches decimeter level, which is even better than that with GPS, making real-time navigation using onboard BDS-3 observations a feasible choice for future remote sensing missions.     

锂离子电池快速寿命评价技术与方法

随着锂离子电池寿命特性的提升，以及电力储能、电动汽车和航空航天等应用领域对长期运行可靠性的需求，迫切需要在较短时间内完成锂离子电池的高精度全周期寿命评价。近年来，针对锂离子电池剩余寿命的研究较多，但对以锂离子电池寿命特性验证与鉴定为目的的快速寿命评价技术和方法缺乏系统梳理。本文分析了锂离子电池寿命评价的快速、高精度、强适用性等特点，归纳了锂离子电池寿命预测的通用技术和加速寿命试验设计流程，总结了4种可操作性强的快速寿命评价方法实例，为锂离子电池设计、制造和应用提供参考和借鉴。     

敏捷SAR卫星平台载荷一体化控制方法研究

面向具备波束指向捷变能力的小型化敏捷合成孔径雷达(SAR)卫星成像需求,提出了通过平台姿态敏捷机动和载荷波束捷变扫描一体化控制实现条带成像、多条带拼接成像、滑动聚束成像等传统成像模式的方法。针对配合成像过程提出的大角度机动和高精度高稳定度连续指向跟踪控制要求,采用5个单框架控制力矩陀螺(SGCMG)组成的"五面锥"构形控制力矩陀螺群作为执行机构,设计了基于姿态四元数和角速度反馈的改进型递阶饱和控制器,实现了平台的敏捷机动和对目标的稳定跟踪指向。数学仿真结果表明:该控制系统有效可行。     

Precise orbit determination and baseline consistency assessment for Swarm constellation

Precise orbit determination (POD) and precise baseline determination (PBD) of Swarm satellites with 4 years of data are investigated. Ambiguity resolution (AR) plays a crucial role in achieving the best orbit accuracy. Swarm POD and PBD based on single difference (SD) AR and traditional double difference (DD) AR methods are explored separately. Swarm antenna phase center variation (PCV) corrections are developed to further improve the orbit determination accuracy. The code multipath of C1C, C1W and C2W observations is first evaluated and clear variations in code noise related to different receiver settings are observed. Carrier phase residuals of different time periods and different loop tracking settings of receiver are studied to explore the effect of ionospheric scintillation on POD. The reduction of residuals in the polar and geomagnetic equator regions confirms the positive impact of the updated carrier tracking loops (TLs) on POD performance. The SD AR orbits and orbits with float ambiguity (FA) are compared with the Swarm precise science orbits (PSOs). An average improvement of 27 %, 4 % and 16 % is gained in along-track, cross-track and radial directions by fixing the ambiguity to integer. For Swarm-A/B and Swarm-B/C formations, specific days are selected to perform the DD AR-based POD during which the average distance of the formation satellites is less than 5000 km. Satellite laser ranging (SLR) observations are employed to validate the performance of FA, SD AR and DD AR orbits. The consistency between the SD AR orbits and SLR data is at a level of 10 mm which shows an improvement of 25 % when comparing with the FA results. An SLR residuals reduction of 15 % is also achieved by the DD AR solution for the selected days. Precise relative navigation is also an essential aspect for spacecraft formation flying missions. The closure error method is proposed to evaluate the baseline precision in three dimensions. A baseline precision of 1–3 mm for Swarm-A/C formation and 3–5 mm for Swarm-A/B and Swarm-B/C satellite pairs is verified by both the consistency check and closure error method.     

Precise orbit determination for TH02-02 satellites based on BDS3 and GPS observations

The Tianhui-2 02 (TH02-02) satellite formation, as a supplement to the microwave mapping satellite system Tianhui-2 01 (TH02-01), is the first Interferometric Synthetic Aperture Radar (InSAR) satellite formation-flying system that supports the tracking of BeiDou global navigation Satellite system (BDS3) new B1C and B2a signals. Meanwhile, the twin TH02-02 satellites also support the tracking of Global Positioning System (GPS) L1&L2 and BDS B1I&B3I signals. As the spaceborne receiver employs two independent boards to track the Global Navigation Satellite System (GNSS) satellites, we design an orbit determination strategy by estimating independent receiver clock offsets epoch by epoch for each GNSS to realize the multi-GNSS data fusion from different boards. The performance of the spaceborne receiver is evaluated and the contribution of BDS3 to the kinematic and reduced-dynamic Precise Orbit Determination (POD) of TH02-02 satellites is investigated. The tracking data onboard shows that the average number of available BDS3 and GPS satellites are 8.7 and 9.1, respectively. The carrier-to-noise ratio and carrier phase noise of BDS3 B1C and B2a signals are comparable to those of GPS. However, strong azimuth-related systematic biases are recognized in the pseudorange multipath errors of B1C and B3I. The pseudorange noise of BDS3 signals is better than that of GPS after eliminating the multipath errors from specific signals. Taking the GPS-based reduced-dynamic orbit with single-receiver ambiguity fixing technique as a reference, the results of BDS3-only and BDS3 + GPS combined POD are assessed. The Root Mean Square (RMS) of orbit comparison of BDS3-based kinematic and reduced-dynamic POD with reference orbit are better than 7 cm and 3 cm in three-Dimensional direction (3D). The POD performance based on B1C&B2a data is comparable to that based on B1I&B3I. The precision of BDS3 + GPS combined kinematic orbit can reach up to 3 cm (3D RMS), which has a more than 25% improvement relative to the GPS-only solution. In addition, the consistency between the BDS3 + GPS combined reduced-dynamic orbit and the GPS-based ambiguity-fixed orbit is better than 1.5 cm (3D RMS).