Phase Residual Estimations for PCVs of Spaceborne GPS Receiver Antenna and Their Impacts on Precise Orbit Determination of GRACE Satellites

In-flight phase center systematic errors of global positioning system(GPS) receiver antenna are the main restriction for improving the precision of precise orbit determination using dual-frequency GPS.Residual approach is one of the valid methods for in-flight calibration of GPS receiver antenna phase center variations(PCVs) from ground calibration.In this paper,followed by the correction model of spaceborne GPS receiver antenna phase center,ionosphere-free PCVs can be directly estimated by ionosphere-free carrier phase post-fit residuals of reduced dynamic orbit determination.By the data processing of gravity recovery and climate experiment(GRACE) satellites,the following conclusions are drawn.Firstly,the distributions of ionosphere-free carrier phase post-fit residuals from different periods have the similar systematic characteristics.Secondly,simulations show that the influence of phase residual estimations for ionosphere-free PCVs on orbit determination can reach the centimeter level.Finally,it is shown by in-flight data processing that phase residual estimations of current period could not only be used for the calibration for GPS receiver antenna phase center of foretime and current period,but also be used for the forecast of ionosphere-free PCVs in future period,and the accuracy of orbit determination can be well improved.     

DORIS系统自主在轨实时定轨的实现与精度分析

国家科技重大专项高分辨率空间对地观测项目的实施,对卫星平台的自主在轨实时定轨提出了新的需求。由法国发展的DORIS实时定轨系统虽已成功应用于多个对地观测平台,但该系统从未公布其原始数据和数据处理的技术细节,因此本文尝试利用DORIS地面主控站提供的ENVISAT标准格式多普勒数据,假设星上自主定轨时采用相同的数据,基于卡尔曼滤波算法实现（仿真）自主实时定轨。计算表明仅考虑简单的非球形引力模型,对于位置误差1km,速度误差1m/s的初始条件,2小时后滤波趋于稳定,滤波精度为十米量级,速度精度为厘米每秒级。为提高滤波计算效率,对坐标系统转换进行简化后,定轨精度仍在十米量级。基于DORIS仿真测量数据滤波计算表明,随着测量精度的提高和每圈观测弧段的增加,滤波计算的精度也会得到有效提高。     

卫星与测站钟差支持条件下的GEO卫星精密定轨

在基于伪距的GEO卫星精密定轨中, GEO卫星的静地特性导致定轨解算无法对星地组合钟差进行有效估计, 需要独立的时间同步支持. 本文讨论了卫星和测站钟差支持条件下的GEO卫星定轨原理, 利用仿真数据系统地分析了中国区域网跟踪条件下GEO卫星的定轨精度, 从定性和定量角度分析了钟差二次项、星地时间同步精度、站间时间同步精度及系统差等因素对定轨精度的影响.      

An Improved Double r-iteration IOD Method for GEO UCTs Based on SBSS System

The purpose of initial orbit determination, especially in the case of angles-only data for observation, is to obtain an initial estimate that is close enough to the true orbit to enable subsequent precision orbit determination processing to be successful. However, the classical angles-only initial orbit determination methods cannot deal with the observation data whose Earth-central angle is larger than 360°. In this paper, an improved double r-iteration initial orbit determination method to deal with the above case is presented to monitor geosynchronous Earth orbit objects for a spacebased surveillance system. Simulation results indicate that the improved double r-iteration method is feasible, and the accuracy of the obtained initial orbit meets the requirements of re-acquiring the object.      

Orbit determination by genetic algorithm and application to GEO observation

This paper demonstrates an initial orbit determination method that solves the problem by a genetic algorithm using two well-known solutions for the Lambert’s problem: universal variable method and Battin method. This paper also suggests an intuitive error evaluation method in terms of rotational angle and orbit shape by separating orbit elements into two groups. As reference orbit, mean orbit elements (original two-lines elements) and osculating orbit elements considering the J2 effect are adopted and compared. Our proposed orbit determination method has been tested with actual optical observations of a geosynchronous spacecraft. It should be noted that this demonstration of the orbit determination is limited to one test case. This observation was conducted during approximately 70 min on 2013/05/15 UT. Our method was compared with the orbit elements propagated by SGP4 using the TLE of the spacecraft. The result indicates that our proposed method had a slightly better performance on estimating orbit shape than Gauss’s methods and Escobal’s method by 120 km. In addition, the result of the rotational angle is closer to the osculating orbit elements than the mean orbit elements by 0.02°, which supports that the estimated orbit is valid.     

一种针对恒模信号的运动单站直接定位算法

相比于常规的"测向+位置估计"两步定位模式,以Weiss等提出的目标直接位置确定(DPD)算法具有估计精度高、分辨能力强和无需数据关联等诸多优点。基于该类定位算法的基本理念,提出了一种利用单个运动天线阵列对恒模(即相位调制)信号的DPD算法。首先,依据最大似然(ML)准则以及恒模信号的恒包络特征,建立了相应的直接定位优化模型;接着,根据优化函数的代数特征提出了一种有效的多参量交替迭代算法,用以获得ML估计器的最优数值解;此外,推导了针对恒模信源的位置直接估计方差的克拉美罗界(CRB),从而为新算法的定位精度提供定量的理论下界。仿真实验表明:相比于已有的基于单个运动天线阵列的直接定位算法以及传统的两步定位算法,通过利用恒模信号的恒包络特征可以明显提高目标直接定位的估计精度。     

北斗卫星导航系统实时定轨与钟差处理策略

目前鲜有对北斗卫星导航系统（BeiDouNavigationSatelliteSystem,BDS）实时精密定轨与钟差确定的研究,文章提出了BDS实时轨道与实时钟差处理策略,包括了观测与动力学模型、实时轨道与实时钟差处理流程与评估方法。尤其对于实时钟差,为了提高计算效率,联合使用两个独立并行的线程估计非差绝对钟差和历元间相对钟差。利用多模全球卫星导航系统试验(MGEX)与全球连续检测评估系统（iGMAS）实测数据进行了北斗实时轨道与钟差解算,BDS实时轨道径向平均精度对于GEO卫星优于20cm,对于IGSO与MEO一般优于10cm;钟差精度对于GEO卫星为0.5~4.5ns,对于IGSO／MEO为0.2~2.0ns。基于目前的轨道与钟差结果,实时精密单点定位（PrecisePointPositioning,PPP）结果可以达到分米量级。     

星间测距对小卫星编队相对轨道状态的修正

相对轨道状态确定是小卫星编队正常工作的基础和重要保障.针对小型化、低成本的星载GPS接收机定轨精度较低的情况,提出一种利用单纯星间测距信息对卫星编队相对轨道进行修正的方法.引入星间测距信息,采用扩展卡尔曼滤波算法提高编队的相对轨道估计精度.通过仿真验证,证实了该方案的有效性.     

一种多卫星编队飞行的准确定位方法

为实现多卫星编队飞行的准确定位，用微型扫描激光距离探测器(MS-LRF)确定卫星间的相对位置．并给出了不同的算法。该方法的精度高、速度快，无需坐标变换，其可靠性和可行性较高。     

北斗首颗备份卫星性能初步分析

主要从卫星钟差预报、轨道测定精度、伪距波动情况等角度分析了I6卫星与北斗卫星导航系统（BDS）其他现役倾斜地球同步轨道（IGSO）卫星的异同,并从位置精度因子（PDOP）和格网可用性评估了I6卫星入网对BDS的贡献。利用星地双向时频传递设备观测的星地钟差数据,评估了I6卫星星载原子钟的预报性能,结果表明,I6卫星发播的卫星钟参数外推5h预报误差的均方根误差（RMS）为232ns,外推1h预报误差的RMS为073ns,与现役IGSO卫星钟差预报水平相当;对多星联合精密定轨结果分析表明,与北斗现役I3卫星相比,姿态控制方式优化后的I6卫星在地影期间的轨道精度并未发生明显衰减,克服了现有北斗二号卫星在地影期间轨道精度下降,从而影响北斗服务的连续性、可用性问题;利用大口径抛物面天线采集到的数据对I6卫星的伪距波动进行了分析,结果表明I6卫星单个观测弧段内其伪距波动峰峰差约为1m,与其他IGSO卫星一致;进行PDOP仿真计算,结果表明I6卫星的加入使得喀什地区的PDOP最大值由1282下降为726,PDOP大于6的时段所占百分比由2911%下降为1721%;对格网电离层产品实施解算,结果表明I6卫星的加入使得6个电离层格网点的可用度提升至95%以上。