考虑配平特性的超声速客机低声爆气动布局优化研究

降低声爆水平是下一代超声速运输机研制需要解决的关键问题之一。低声爆优化通常使飞行器布局向着机翼后掠角增大、机翼沿机身方向分布范围增大的趋势发展,给飞行器的配平和低速特性带来不利影响。以某超声速客机基本构型为研究对象,建立基于类别/形状函数的翼身组合体参数化建模方法;基于超声速线化理论分析外形几何参数对声爆水平的影响。在此基础上,分别针对机身轮廓、机翼平面形状以及扭转角分布对该构型进行低声爆优化和俯仰力矩特性优化,并采用CFD 方法对优化结果进行校核。结果表明：与基准构型相比,在不显著增加俯仰力矩的基础上,优化构型的阻力降低了19 cts,近场过压显著降低,地面声爆响度降低5.1 PLdB。     

卫星数传调度问题的速度可控粒子群优化算法

针对卫星数传调度这一类复杂的约束组合优化问题,提出了一种速度方向和尺度可控的粒子群优化求解算法。为克服粒子群算法的早熟问题,该算法引入了速度更新的方向控制规则和尺度控制规则用于增加群体的多样性,并根据两种控制规则,提出了种群粒子的速度迭代策略,实现了算法运行过程中粒子间吸引和排斥过程的动态调整,同时保证了算法的收敛速度。设计了卫星数传调度问题的编码和解码方式,并证明了该编码方式下最优可行解的存在性。通过仿真实例验证了算法的有效性,并分析了算法控制参数对优化结果的影响。     

Reliability-based trajectory optimization using nonintrusive polynomial chaos for Mars entry mission

This paper presents the reliability-based sequential optimization (RBSO) method to settle the trajectory optimization problem with parametric uncertainties in entry dynamics for Mars entry mission. First, the deterministic entry trajectory optimization model is reviewed, and then the reliability-based optimization model is formulated. In addition, the modified sequential optimization method, in which the nonintrusive polynomial chaos expansion (PCE) method and the most probable point (MPP) searching method are employed, is proposed to solve the reliability-based optimization problem efficiently. The nonintrusive PCE method contributes to the transformation between the stochastic optimization (SO) and the deterministic optimization (DO) and to the approximation of trajectory solution efficiently. The MPP method, which is used for assessing the reliability of constraints satisfaction only up to the necessary level, is employed to further improve the computational efficiency. The cycle including SO, reliability assessment and constraints update is repeated in the RBSO until the reliability requirements of constraints satisfaction are satisfied. Finally, the RBSO is compared with the traditional DO and the traditional sequential optimization based on Monte Carlo (MC) simulation in a specific Mars entry mission to demonstrate the effectiveness and the efficiency of the proposed method.     

综合模块化航空电子系统节能分层调度的设计(英文)

近年来,综合模块化航空电子(Integrated Modular Avionics,IMA)构架逐渐流行,并通过引入资源分区的概念取代了传统的联合式系统构架。研究了IMA构架下分层调度的设计问题。调度模型通过强时间分区,使多个强实时应用方便地集成在一个单处理器平台。推导出分区周期、分区系数以及可调度性在实时条件下的数学关系,并提出了分区参数的优化算法。考虑具有任意时限的实时任务模型,提高了算法的通用性。在分层调度的基础上,通过有效利用松弛时间,提出一种能量优化方法,进一步减少了飞行器上嵌入式系统的能耗。实验结果表明,本文提出的系统设计方法在保证硬实时需求的基础上,有效的降低能耗达 14%。     

Design and application of an Electric Tail Rotor Drive Control (ETRDC) for helicopters with performance tests

With the development of electric helicopters’ motor technology and the widespread use of electric drive rotors, more aircraft use electric rotors to provide thrust and directional control. For a helicopter tail rotor, the wake of the main rotor influences the tail rotor’s inflow and wake. In the procedure of controlling, crosswind will also cause changes to the tail disk load. This paper describes requirements and design principles of an electric motor drive and variable pitch tail rotor system. A particular spoke-type architecture of the motor is designed, and the performance of blades is analyzed by the CFD method. The demand for simplicity of moving parts and strict constraints on the weight of a helicopter makes the design of electrical and mechanical components challenging. Different solutions have been investigated to propose an effective alternative to the mechanical actuation system. A test platform is constructed which can collect the dynamic response of the thrust control. The enhancement of the response speed due to an individual motor speed control and variable-pitch system is validated.     

Solar Sources of Heliospheric Energetic Electron Events—Shocks or Flares?

Electrons with near-relativistic (E≳30 keV, NrR) and relativistic (E≳0.3 MeV) energies are often observed as discrete events in the inner heliosphere following solar transient activity. Several acceleration mechanisms have been proposed for the production of those electrons. One candidate is acceleration at MHD shocks driven by coronal mass ejections (CMEs) with speeds ≳1000 km s⁻¹. Many NrR electron events are temporally associated only with flares while others are associated with flares as well as with CMEs or with radio type II shock waves. Since CME onsets and associated flares are roughly simultaneous, distinguishing the sources of electron events is a serious challenge. On a phenomenological basis two classes of solar electron events were known several decades ago, but recent observations have presented a more complex picture. We review early and recent observational results to deduce different electron event classes and their viable acceleration mechanisms, defined broadly as shocks versus flares. The NrR and relativistic electrons are treated separately. Topics covered are: solar electron injection delays from flare impulsive phases; comparisons of electron intensities and spectra with flares, CMEs and accompanying solar energetic proton (SEP) events; multiple spacecraft observations; two-phase electron events; coronal flares; shock-associated (SA) events; electron spectral invariance; and solar electron intensity size distributions. This evidence suggests that CME-driven shocks are statistically the dominant acceleration mechanism of relativistic events, but most NrR electron events result from flares. Determining the solar origin of a given NrR or relativistic electron event remains a difficult proposition, and suggestions for future work are given.     

面向代理模型的机翼变形计算方法

按照机翼结构设计的原则,对内部结构还未确定的机翼提出了一种通用的变形计算方法。机翼的平面形状可看作由多个梯形组成,机翼弯曲变形为三次函数,扭转变形为一次函数。只要给定翼梢挠度与扭转角,即可计算机翼变形情况下的几何模型,使代理模型能够预测变形后机翼的气动载荷分布。文中给出了两个实际机翼的算例。算例结果表明,本文模型预测的变形与实际结构有限元分析给出的变形吻合较好。     

15-5PH沉淀硬化不锈钢磁粉检测磁痕分析

针对航空15-5PH马氏体沉淀硬化不锈钢在磁粉检测过程中发现的条状、片状和长直磁痕显示进行了总结。分析了不同磁痕显示的特点及微观组织情况,最终确定了磁痕的性质。结合不同热处理状态下的磁特性分析,确立了纯洁度磁粉检测的工艺流程以及磁痕判别方法。研究发现沉淀硬化不锈钢在磁粉检测过程中磁痕显示主要是由铁素体和组织不均匀造成的。研究结论为航空制造过程中沉淀硬化不锈钢的磁粉检测的磁痕判定以及规范的制定提供依据,确保磁粉检测工作的顺利进行。     

可重复使用飞行器陶瓷瓦热防护系统尺寸优化分析

针对可重复使用飞行器陶瓷瓦热防护系统再入过程中防热和承载问题,结合有限元软件ANSYS建立热分析模型和结构模型,模拟再入过程中陶瓷瓦热防护系统防热和承载作用,预测内部瞬态温度响应。然后利用热模型和结构模型以及ANSYS软件优化模块对陶瓷瓦热防护系统尺寸进行优化,并且对比考虑内部热损耗和不考虑内部热损耗两种情况下的优化结...     

大涵道比涡扇发动机循环参数优化算法研究及应用

针对多约束条件与多优化变量的大涵道比涡扇发动机循环参数优化问题,提出了自适应三次变异差分进化算法,运用多个Benchmarks多峰函数对算法进行验证,并将该算法与大涵道比涡扇发动机性能计算程序相结合,对多约束条件下的循环参数进行了优化.计算结果表明:自适应三次变异差分进化算法比传统差分进化算法收敛精度更高、收敛速度更快,大幅度提高了大涵道比涡扇发动机循环参数优化效果,适合解决大涵道比涡扇发动机循环参数优化问题.