Analysis of Chang’e-5 lunar core drilling process

Chang’e-5 explorer successfully acquired lunar regolith core samples from depths of greater than 1 m of lunar surface. This study analyzed the lunar core drilling process based on the telemetry data, image information, and returned samples to optimize the sampling device design and enhance the understanding of the lunar regolith. In particular, a prediction method for the projected drilling path and local terrain fitting of drilling dip angle was proposed based on the flight events recorded during the core drilling process and the image information acquired before, during, and after sampling. The results revealed that the drilling dip angle of Chang’e-5 was approximately 2.3°, and the deviation of the drilling length and depth was less than 2 mm. For continuous drilling, a fusion method based on telemetry data and image information was applied to determine the demarcation point of drilling with and without the lunar soil. The position of the demarcation point implied that the drilling point remained at approximately 6 mm loose soil, thereby lagging the action of the force response. Additionally, a characteristic parameter comparison method was proposed for the lunar and ground drilling to analyze the status of the lunar soil. Furthermore, the analysis results revealed that the majority of the Chang’e-5 drilling samples were derived from 0–73.8 cm below the lunar surface and few samples were extracted below 73.8 cm, as the drilling encountered several rocky regions. Moreover, the drilling point exhibited two prominent stratification variations at ～28.7 cm and ～70 cm below the lunar surface. Ultimately, the preliminary relationship between sample dissected position in soft tube and drilling displacement was analyzed. The segmented estimation results can support research on subsurface lunar soil.     

基于统计学特征的密集型气液雾化随机模型优化方法研究

在高气液动量比的空气雾化流场中，液滴和液丝从液核剥离的过程具有高自由度、分布密集的特点，传统理论模型难以对其准确预测。本文对结合大涡模拟方法的随机雾化模型进行优化，在初始雾化过程，提出使用液滴统计平均温度来表征液滴碰撞统计学特性的改进方法。液滴的统计平均温度分别采用气液相对动能模型的粒子追踪法和亚网格动能模型的粒子追踪法。研究表明，使用改进的气液雾化随机模型预测密集型空气雾化流场，大幅改善了传统雾化随机模型在初始雾化区域过预测的缺陷，平均动能的相对误差为15.5%，平均索特尔直径的相对误差为7.2%，与未改进前的模拟结果相比，误差降低了41.1%和15.0%。此外，本文还探究了喷雾张角模型对雾化流场预测结果的影响，分别将实验所得经验公式法、相界面气液动量平衡所得模拟法与亚网格动能模型的粒子追踪法结合。结果表明喷雾张角经验公式预测结果更为准确，在平均索特尔直径预测方面准确性提高了17.3%。     

基于拉丁超立方抽样的五孔探针标定方法

为提高五孔探针的标定效率,研究了一种采用拉丁超立方抽样技术开展变马赫数五孔探针标定的试验方法.马赫数在0.2～0.5范围内的对比试验结果表明:采用改进的拉丁超立方抽样标定技术可使攻角与侧滑角的拟合误差较一般拉丁超立方抽样方法下降14.3％～28.6％,且攻角与侧滑角的拟合方均根误差均在1°以内,马赫数的拟合方均根误差不...     

基于多层次特征的高分影像海岸带地物分类

针对高分辨率影像地物光谱丰富复杂的问题，文章提出了一种结合像元-对象-空间格局特征的水域、盐田等海岸带精细地物分类方法。首先基于像元和空间格局特征分别利用遗传算法优化随机森林参数进行分类；其次将两种分类结果采用D-S证据理论融合；然后基于不同地物斑块的空间上下文信息，采用粒子群算法优化支持向量机（Support Vector Machine，SVM）参数实现面向对象的二次分类。为验证方法的有效性，收集山东省莱州湾海岸带附近区域的“高分二号”卫星影像，开展了水域及水利设施用地、盐田、工矿用地、交通运输用地、住宅用地、沿海滩涂、海域与耕地8类地物的分类实验，总体精度达到97.21%，Kappa系数为0.964 2。实验结果表明，文章提出的高分影像海岸带地物分类方法兼顾像元、对象及空间格局特征优点，能够实现多层次细致分类，并同时兼具较短的训练时长与较高的分类精度。该研究成果可为中国海岸带生态环境监测与土地利用规划提供一定技术支撑。     

模块化月球表层采样力学模型

因不受作业空间的限制，月球表层采样机具设计形式多样，为建模分析带来较大难度。为避免不同结构机具分析时重复建模，建立了一种模块化的月球表层采样力学模型。该模型将复杂的采样机具拆分成若干个基本面单元，基于朗肯土压力理论、最大抗剪强度理论和地基极限承载力理论对面单元在采样过程中的受力进行分析，组合各个面单元所受到的力获得复杂机具的力学模型。基于不同机具形式与贯入角度的模拟月壤贯入试验，对理论模型进行了试验验证，通过引入月壤密度沿深度的影响修正公式，将理论模型的误差率降低至8.2%。结果证明该力学模型和模块化理论可行，为后期月球表层采样机具的设计研发提供了参考。     

Influence of lunar regolith compressibility on sampling performance of thick wall spiral drills

A 2 m class robotic drill was sent to the Moon and successfully collected and returned regolith samples in late 2020 by China. It was a typical thick wall spiral drill (TWSD) with a hollow auger containing a complex coring system to retain subsurface regolith samples. Before the robotic drill was launched, a series of laboratory tests were carried out to investigate and predict the possible drilling loads it may encounter in the lunar environment. This work presents how the sampling performance of the TWSD is affected by the regolith compressibility. Experiments and analysis during the drilling and sampling process in a simulated lunar regolith environment were conducted. The compressibility of a typical lunar regolith simulant (LRS) was measured through uni-directional compression tests to study the relationship between its inner regolith stress and bulk density. A theoretical model was established to elucidate the cutting discharge behavior by auger flights based on the aforementioned relationship. Experiments were conducted with the LRS, and the results show that the sampling performance is greatly affected by the flux of the drilled cuttings into the spiral flight channels. This work helped in scheduling reasonable drilling parameters to promote the sampling performance of the robotic drill in the Chinese Chang'E 5 mission.     

基于多维数值积分的高阶确定采样型滤波方法

基于多维数值积分讨论了确定采样型滤波器,这一类滤波器的不同之处体现在对滤波器中均值和方差的计算,这一问题与数值积分密切相关.针对以往确定采样型滤波器在提高滤波精度的同时会增加计算量,通过分析高斯权值积分,采用完全对称积分公式,计算积分节点、节点个数及权重,相比高斯厄米特滤波减少了计算量,同时滤波精度可达到五阶以上.选取典型算例对新的滤波方法仿真分析,验证了该滤波方法的可行性和有效性.     

STABC-IR: An air target intention recognition method based on bidirectional gated recurrent unit and conditional random field with space-time attention mechanism

The battlefield environment is changing rapidly, and fast and accurate identification of the tactical intention of enemy targets is an important condition for gaining a decision-making advantage. The current Intention Recognition (IR) method for air targets has shortcomings in temporality, interpretability and back-and-forth dependency of intentions. To address these problems, this paper designs a novel air target intention recognition method named STABC-IR, which is based on Bidirectional Gated Recurrent Unit (BiGRU) and Conditional Random Field (CRF) with Space-Time Attention mechanism (STA). First, the problem of intention recognition of air targets is described and analyzed in detail. Then, a temporal network based on BiGRU is constructed to achieve the temporal requirement. Subsequently, STA is proposed to focus on the key parts of the features and timing information to meet certain interpretability requirements while strengthening the timing requirements. Finally, an intention transformation network based on CRF is proposed to solve the back-and-forth dependency and transformation problem by jointly modeling the tactical intention of the target at each moment. The experimental results show that the recognition accuracy of the jointly trained STABC-IR model can reach 95.7%, which is higher than other latest intention recognition methods. STABC-IR solves the problem of intention transformation for the first time and considers both temporality and interpretability, which is important for improving the tactical intention recognition capability and has reference value for the construction of command and control auxiliary decision-making system.     

Pressure distribution feature-oriented sampling for statistical analysis of supercritical airfoil aerodynamics

In the field of supercritical wing design, various principles and rules have been summarized through theoretical and experimental analyses. Compared with black-box relationships between geometry parameters and performances, quantitative physical laws about pressure distributions and performances are clearer and more beneficial to designers. With the advancement of computational fluid dynamics and computational intelligence, discovering new rules through statistical analysis on computers has beco...     

基于B1c/B2a/B3I北斗三频实时 高采样率动态PPP分析

为了分析北斗三号新信号的三频实时动态PPP定位性能，首先推导了三频两两组合无电离层模型和三频非差非组合模型的观测方程。基于山东建筑大学CORS站观测得到的北斗三号B1c/B2a/B3I三频信号1s采样率数据，使用iGMAS提供的超快速精密星历预报部分，制定了基于B1cB3I-B2aB3I三频无电离层两两组合、B1cB2aB3I三频非差非组合以及用于对比分析的B1cB2a、B1IB3I两种双频无电离层共四种定位方案。然后利用Net_Diff软件进行实时动态PPP实验，对超快速精密轨道和钟差预报部分的精度和稳定度以及实验解算结果进行分析，对比不同定位方案的定位性能。实验分析表明，两种三频定位方案定位性能均优于B1cB2a双频定位方案，定位精度能达到0.462m和0.479m，收敛至分米所需时间能达到45.8min和62.8min；B1IB3I方案定位性能优于两种三频定位方案，定位精度和收敛速度能达到0.228m和6.6min。