气源系统建模及功能流仿真分析

给出了功能流模型定义及其建模流程,详细分析了飞机气源系统的工作模式、层次结构、功能流及典型部件的物理失效过程,并实现了气源系统典型工况的建模。最后对气源系统的功能流相关性关系和传播特性进行了仿真分析,以及功能流故障的注入和系统响应分析。     

修正平均应力法预测轮盘破裂转速的试验研究

基于修正平均应力法,分析了TC17钛合金压气机轮盘型面尺寸参数对径向和周向破裂转速的影响,并对破裂模式的转变进行预判。进而设计了针对径向破裂模式的轮盘试验件,并开展了TC17钛合金压气机轮盘的破裂试验。轮盘破裂试验结果与修正平均应力法计算结果吻合较好,计算的破裂转速储备与试验结果的误差由修正前的7.24%下降为修正后的0.72%,可为工程应用提供依据。     

基于三次样条插值的激光干涉图的细化研究

在利用Ｚｅｒｎｉｋｅ多项式拟合波面的方法中,干涉图的细化误差直接影响波面的拟合误差。提出了利用三次样条函数插值的方法,将干涉图的灰度值分布曲线转换成严格的光滑曲线,从而通过数值计算方法求出灰度值曲线的极大值和极小值,以达到细化的目的。     

A variational Bayesian-based robust adaptive filtering for precise point positioning using undifferenced and uncombined observations

In the application of precise point positioning (PPP), especially in the dynamic mode, the classical Kalman filter (KF) usually produces a large number of estimation errors or diverges when there are gross errors in the observation data or unexpected turbulences occur in target motion state or both of them. For such problem, a variational Bayesian (VB)-based robust adaptive Kalman filtering (VB-RAKF) is proposed in this paper. This filter introduces a classification robust equivalent weight function to resist observation gross error and the inverse Wishart prior to model inaccurate process noise covariance matrix (PNCM). To improve the instantaneous accuracy of state estimation, the VB approach is used to obtain better estimations of inaccurate PNCM. Several sets of observation data collected by IGS reference stations and vehicles are employed to check the robustness and positioning accuracy of the VB-RAKF model. The results show that the VB-RAKF algorithm is more robust than the KF, and can effectively resist the gross error in observation data and control state disturbance. In the IGS reference station tests, when compared to the KF, the static positioning accuracies of the VB-RAKF in the north, east and up directions are improved by 13%, 8% and 22%, respectively, and the simulated dynamic positioning accuracies of the VB-RAKF in the north, east and up directions are improved by 19%, 9% and 21%, respectively. The in-vehicle dynamic test verifies that the VB-RAKF outperforms the KF, and shows that the VB-RAKF has better performance than the KF when dealing with observation data which has obvious gross errors, and similar performance as the KF when gross errors are small.     

Reliability estimation of rotary lip seal in aircraft utility system based on time-varying dependence degradation model and its experimental validation

With several attractive properties, rotary lip seals are widely used in aircraft utility system, and their reliability estimation has drawn more and more attention. This work proposes a reliability estimation approach based on time-varying dependence analysis. The dependence between the two performance indicators of rotary lip seals, namely leakage rate and friction torque, is modeled by time-varying copula function with polynomial to denote the time-varying parameters, and an efficient copula selection approach is utilized to select the optimal copula function. Parameter estimation is carried out based on a Bayesian method and the reliability during the whole lifetime is calculated based on a Monte Carlo method. Degradation test for rotary lip seal is conducted and the proposed model is validated by test data. The optimal copula function and optimal order of polynomial are determined based on test data. Results show that this model is effective in estimating the reliability of rotary lip seals and can achieve a better goodness of fit.     

A global empirical orthogonal function model of plasmaspheric electron content

Based on the method for establishing a global plasmaspheric model using observations from COSMIC and MetOp-A orbit determination GNSS receivers, Chen et al. (2017) obtained a global plasmaspheric total electron content product with a spatial resolution of 2.5° × 5° and a time resolution of 4 h. In this paper, we use those global plasmaspheric electron content product in 2008, 2010, 2011, 2012, 2014 for 1446 days to establish a global plasmaspheric empirical model based on empirical orthogonal function (EOF). The model can well characterize the spatiotemporal variation of plasmaspheric electron content (PEC) and the influence of solar radiation on it. Only the first four orders of EOF sequences can characterize the 98.43% features of the original PEC dataset. The principal component coefficient Pk is decomposed twice during modeling, and the combination of trigonometric function and linear function is used to model Pk to characterize the solar cycle, annual cycle, semi-annual cycle and quarter-cycle variation. We compare the PEC model values with the actual observation data, the results show that the empirical PEC model values are highly correlated with the actual observations. The correlation between the two is above 0.96, and the RMS maximum of the difference between the PEC model values and the observed values are 0.70 TECU, and the average of the difference between the PEC model values and the observed values are −0.18 TECU, respectively. In addition, we validate the reliability of the global plasmaspheric model established by two empirical orthogonal function decomposition method using actual observation data, according to the global distribution of the differences between the PEC model values and the observed values in low solar activity and high solar activity, it can be seen that under low solar activity and high solar activity conditions, the model has good adaptability.     

Estimation of differential code biases with Jason-2/3 onboard GPS observations

With the continuous deployment of Low Earth Orbit (LEO) satellites, the estimation of differential code biases (DCBs) based on GNSS observations from LEO has gained increasing attention. Previous studies on LEO-based DCB estimation are usually using the spherical symmetry ionosphere assumption (SSIA), in which a uniform electron density is assumed in a thick shell. In this study, we propose an approach (named the SHLEO method) to simultaneously estimate the satellite and LEO onboard receiver DCBs by modeling the distribution of the global plasmaspheric total electron content (PTEC) above the satellite orbit with a spherical harmonic (SH) function. Compared to the commonly used SSIA method, the SHLEO model improves the GPS satellite DCB estimation accuracy by 13.46% and the stability by 22.34%, respectively. Compared to the GPS satellite DCBs estimated based on the Jason-3-only observations, the accuracy and monthly stability of the satellite DCBs can be improved by 14.42% and 26.8% when both Jason-2 and Jason-3 onboard observations are jointly processed. Compared with the Jason-2 solutions, the GPS satellite DCB estimates based on the fusion of Jason-2 and Jason-3 observations have an improved consistency of better than 18.26% and 9.71% with the products provided by the Center for Orbit Determination in Europe (CODE) and Chinese Academy of Sciences (CAS). Taking the DCB products provided by the German Aerospace Center (DLR) as references, there is no improvement in accuracy of the GPS satellite DCB estimates based on the fusion of Jason-2 and Jason-3 observations than the Jason-2 solutions alone. A periodic variation is found in the time series of both the Jason-3 and Jason-2 onboard receiver DCB estimates. Preliminary analysis of the PTEC distribution based on the estimated SH coefficients are also presented.     

爆轰胞格尺寸的统计分析

爆轰胞格尺寸作为可燃系统的本征值,可用来确定爆轰传播时的临界尺寸,比如直管传播时的临界管径、管道突扩时的临界尺寸等。然而,该尺寸的测量具有较强的主观性。为了减少人工测量带来的不确定性,文章采用两种统计方法:概率密度函数法和自相关函数法,对数值模拟得到的不同规则程度的爆轰胞格进行了统计分析。爆轰胞格的不规则程度采用单步反应的活化能来体现。当活化能较低时(Ea=15),胞格较规则,两种统计方法得到的胞格尺寸较一致。随着活化能的增加(Ea=20),胞格开始不规则,两种统计方法也开始出现偏差。当活化能进一步增加(Ea=25、27),胞格极不规则,开始出现横波的合并,两种统计方法得到的结果出现较大的偏差。这是由于概率密度法处理爆轰波阵面三波点规则时,没有考虑迹线上能量的分布,而自相关函数法根据三波点上的涡量值对胞格尺寸进行统计分析,因此,该方法得到的爆轰胞格尺寸比概率函数法更能真实体现可燃系统的爆轰特性。     

基于随机模糊参数的结构模糊可靠性分析模型

结构模糊可靠性理论研究主要是建立仅考虑失效准则模糊性的结构模糊可靠性分析模型.在现有结构模糊可靠性分析理论研究的基础上,同时考虑工程中结构参数的随机性和区间模糊性,提出了模糊概率密度函数的概念,并推导相应的模糊概率密度函数公式,给出了反映随机参数区间模糊性的隶属函数的类型和选取方法.建立了同时考虑随机参数区间模糊性和失效准则模糊性的结构模糊可靠性分析模型.讨论了模糊可靠性分析模型与常规的随机可靠性分析模型的相容性.并给出算例进行验证,研究结果表明,采用该结构模糊可靠性分析方法更能全面地利用结构参数信息.     

用AM300型函数信号发生器建立相位测量标准装置

提出了一种建立相位测量标准装置的方法。该标准装置以AM300型函数信号发生器为主标准器,相位计、示波器、失真度测量仪、数字电压表为配套设备。对AM300型函数信号发生器的量值指标进行了测试和实验,包括：相位增量误差测试、相位绝对零度误差测试、60°幅相误差测试、测量的重复性实验和长期稳定性实验。结果表明：该标准装置测试结果准确,性能稳定可靠,具有造价低、实用性强的特点。