改进型滑模变结构电机控制的脉振电流注入法研究

为了提高永磁同步电机无位置传感器技术的控制性能,在电机动态品质优化的研究中,以滑模变结构控制器替代传统的PI控制器,采用新型趋近律函数改进滑模控制器的输出模型,削弱了传统滑模控制存在的抖振,提高了控制系统的抗干扰能力。在分析无位置传感器技术时,引入高通谐振滤波器,采用具备以高信噪比为特点的两相静止坐标系下高频脉振电流注入法。仿真结果表明,在带高通谐振滤波器的高频脉振电流注入法中运用滑模变结构控制器,提高了转子位置估计的精度,增强了控制系统的鲁棒性。     

流固耦合数据交换的插值精度影响因素研究

提出了一种投影-形函数插值的新方法,用发展了三维线性插值方法。又包括使用优化插值和常体积转化等6种插值方法,从表征多种不同网格质量和待插值函数值情况的角度,进行了插值精度验证的应用研究,探索了网格质量和待插值函数值对插值精度的影响程度。研究结果表明,投影-形函数插值方法的效果很好;流/固的网格质量及其匹配状况在很多情况下对插值精度的影响要远大于插值方法本身。     

Grinding force and surface quality in creep feed profile grinding of turbine blade root of nickel-based superalloy with microcrystalline alumina abrasive wheels

Creep feed profile grinding of the fir-tree blade root forms of single crystal nickel-based superalloy was conducted using microcrystalline alumina abrasive wheels in the present study. The grinding force and the surface quality in terms of surface topography, subsurface microstructure, microhardness and residual stress obtained under different grinding conditions were evaluated comparatively. Experimental results indicated that the grinding force was influenced significantly by the competing predominance between the grinding parameters and the cross-sectional root workpiece profile. In addition, the root workpiece surface, including the root peak and valley regions, was produced with the large difference in surface quality due to the nonuniform grinding loads along the root workpiece profile in normal section. Detailed results showed that the surface roughness, subsurface plastic deformation and work hardening level of the root valley region were higher by up to 25%, 20% and 7% in average than those obtained in the root peak region, respectively, in the current investigation. Finally, the superior parameters were recommended in the creep feed profile grinding of the fir-tree blade root forms. This study is helpful to provide industry guidance to optimize the machining process for the high-valued parts with complicated profiles.     

Time delay compensation in lateral-directional flight control systems at high angles of attack

The previous studies of time delay compensation in flight control systems are all based on the conventional aerodynamic derivative model and conducted in longitudinal motions at low angles of attack. In this investigation, the effects of time delay on the lateral-directional stability augmentation system in high-α regime are discussed based on the $\dot{\beta }$ model, which is proposed in our previous work and proved as a more accurate aerodynamic model to reveal the lateral-directional unsteady aerodynamic characteristics at high angles of attack. Both the $\dot{\beta }$ model and the quasi-steady model are used for simulating the effects of time delay on the flying qualities in high-α maneuvers. The comparison between the simulation results shows that the flying qualities are much more sensitive to the mismatch of feedback gains than the state errors caused by time delay. Then a typical adaptive controller based on the conventional dynamic derivative model and a gain-prediction compensator based on $\dot{\beta }$ model are designed to address the time delay in different maneuvers. The simulation results show that the gain-prediction compensator is much simpler and more efficient at high angles of attack. Finally, the gain-prediction compensator is combined with a linearized $\dot{\beta }$ model reference adaptive controller to compensate the adverse effects of very large time delay, which exhibits excellent performance when addressing the extreme conditions at high angles of attack.     

基于图像特征融合的粉末床缺陷检测方法

针对单一特征对粉末床缺陷表达不明确导致检测效果不佳的问题,提出了一种基于特征融合的增材制造过程粉末床缺陷视觉检测方法。该算法分别使用SIFT方法、灰度共生矩阵和Hu不变矩提取尺度空间特征、纹理特征和几何特征,借助词袋模型对每张图像构建3组视觉单词直方图,通过串行融合3组视觉单词直方图得到新的特征矩阵,采用特征选择对融合后特征矩阵进行降维,并传入随机森林分类器中进行训练。实验结果表明,不同特征对粉末床不同类型缺陷检测具有不同的贡献,优化特征融合参数后,算法平均准确率达到97.46%,缺陷检测效果明显提升。     

实时连续多媒体任务模型及调度算法

传统周期任务模型过于简单,不能适应实时多媒体流任务的多种形式,以用户为中心的连续媒体的调度算法由于未能从全局上考虑任务的服务质量QoS(Quality of Service)需求,因而调度效率较低.提出一种改进的以多媒体对象为中心周期任务模型,该任务模型概括了目前多媒体任务的基本表现形式.基于该任务模型,提出了一种以连续多媒体流的整个质量表现过程为中心的任务表现路径模型TPP(Task Presentation Path).在全面考虑表现路径中媒体流对象的全局死线、局部死线和任务连续失效率的基础上,给出了连续多媒体流的比例资源分配调度算法PSTPP(Proportional Share based on Task Presentation Path).实验结果表明了所提出的周期任务模型的合理性,调度算法能提供比传统分时策略以及EDF算法更好的QoS保证.     

某压气机试验件转子平衡精度分析

航空发动机及其转动部件运行的平稳性与转动件的平衡品质密切相关.为保证压气机试验件可靠运行,分析了压气机转子静平衡、初始动平衡、最终动平衡允许剩余不平衡量控制方法,以及最终动不平衡量的分配方法,并针对某压气机试验件转子,通过采取零件静平衡、组件初始动平衡、转子最终低速动平衡的分步平衡方法,保证了该试验件转子的平衡品质.试验运行结果表明:采取分步平衡精度控制方法,试验件运行平稳、振动水平低.     

视觉条件对驾驶员跟踪着舰引导指令影响研究

针对光学助降系统易受到不良天气（如低能见度）影响的缺点,研究了不同视觉条件对驾驶员跟踪着舰引导指令的影响。在光学着舰引导系统模型建立的基础上,针对不同视觉条件,对驾驶员跟踪菲涅尔透镜“肉球”的情况进行了仿真对比。结果表明,当视觉品质下降时,为防止跟踪效果变差,驾驶员应当减小操纵增益。     

Improving profile accuracy and surface quality of blisk by electrochemical machining with a micro inter-electrode gap

Electrochemical machining (ECM) has emerged as an important option for manufacturing the blisk. The inter-electrode gap (IEG) distribution is an essential parameter for the blisk precise shaping process in ECM, as it affects the process stability, profile accuracy and surface quality. Larger IEG leads to a poor localization effect and has an adverse influence on the machining accuracy and surface quality of blisk. To achieve micro-IEG (<50 μm) blisk finishing machining, this work puts forward a novel variable-parameters blisk ECM strategy based on the synchronous coupling mode of micro-vibration amplitude and small pulse duration. The modelling and simulation of the blisk micro-IEG machining have been carried out. Exploratory experiments of variable-parameters blisk ECM were carried out. The results illustrated that the IEG width reduced with the progress of variable parameter process. The IEG width of the blade’s concave part and convex part could be successfully controlled to within 30 μm and 21 μm, respectively. The profile deviation for the blade’s concave surface and convex surface are 49 μm and 35 μm, while the surface roughness reaches R_a = 0.149 μm and R_a = 0.196 μm, respectively. The profile accuracy of the blisk leading/trailing edges was limited to within 91 μm. Compared with the currently-established process, the profile accuracy of the blade’s concave and convex profiles was improved by 50.5 % and 53.3 %, respectively. The surface quality was improved by 53.2 % and 50.9 %, respectively. Additionally, the machined surface was covered with small corrosion pits and weak attacks of the grain boundary due to selective dissolution. Some electrolytic products were dispersed on the machined surface, and their components were mainly composed of the carbide and oxide products of Ti and Nb elements. The results indicate that the variable-parameters strategy is effective for achieving a tiny IEG in blisk ECM, which can be used in engineering practice.     

装备项目质量进度成本一体化监督方法研究

从项目管理中的三角关系,装备质量进度成本一体化监督模型的可操作性和监督结果的可信性等方面,分析了武器装备质量进度成本一体化监督需求,研究了装备项目一体化监督函数具有的依概率收敛、边际效益递减律和极值等条件,利用卡诺质量模型,以统计均衡分析方法为手段,阐述了项目管理一体化监督函数的生成及求解过程.结合装备研制过程,采用定性分析与定量计算相结合的方式,在大质量观的主导下,以直-8型直升机典型故障为实例,阐明了项目一体化监督函数的求解过程,开展了项目监督风险决策和风险预警工作.