Optimal planning for a multi-debris active removal mission with a partial debris capture strategy

In this paper, a new mission model, called a multi-debris active removal mission with partial debris capture strategy, is proposed. The model assumes that a platform only captures part of the scheduled debris at a time and then releases these debris pieces to a disposal orbit. This process is then repeated until all of the scheduled debris is removed. A genetic algorithm with a multiparameter concatenated coding method is designed to optimize the plan of a multi-debris active removal mission wit...     

Periodic event-triggered formation control for multi-UAV systems with collision avoidance

In this paper, periodic event-triggered formation control problems with collision avoidance are studied for leader–follower multiple Unmanned Aerial Vehicles (UAVs). Firstly, based on the Artificial Potential Field (APF) method, a novel sliding manifold is proposed for controller design, which can solve the problem of collision avoidance. Then, the event-triggered strategy is applied to the distributed formation control of multi-UAV systems, where the evaluation of the event condition is continuous. In addition, the exclusion of Zeno behavior can be guaranteed by the inter-event time between two successive trigger events have a positive lower bound. Next, a periodic event-triggered mechanism is developed for formation control based on the continuous event-triggered mechanism. The periodic trigger mechanism does not need additional hardware circuits and sophisticated sensors, which can reduce the control cost. The stability of the control system is proved by the Lyapunov function method. Finally, some numerical simulations are presented to illustrate the effectiveness of the proposed control protocol.     

卫星SAR载荷蓄电池充电器的建模分析与设计

随着现代商业卫星的发展，低成本、重量轻、多功能、高集成的微纳合成孔径雷达(SAR)卫星迎来加速发展的阶段。由于SAR载荷工作时间短、峰值功率大的特点，需专门为SAR载荷配置一组高压载荷蓄电池，在相同电流下，可输出更大功率。针对高压载荷蓄电池恒流恒压充电的需求，提出采用推挽变换器的隔离升压充电器方案，搭建了推挽变换器的小信号模型，采用峰值电流控制的双环控制策略实现恒流恒压充电控制，最后在充电器样机上进行了实验验证。实验结果验证了分析的正确性与设计的有效性，可以满足SAR载荷蓄电池充电的要求。     

船舶混合动力系统与智能能量管理控制策略研究进展

开发新型动力系统和智能控制策略是解决节能减排的重要技术方向。本文首先对混合动力系统的配置和拓扑结构进行归类与比较，对控制策略中涉及的智能算法进行归纳和总结；其次，对新型动力船舶在动力系统和控制算法使用情况进行阐释；最后，从不同角度对混合动力系统以及能量管理系统的发展趋势进行展望，为绿色船舶混合动力系统开发以及能量管理系统的研发提供了参考依据。     

基于Q-Learning的深度神经网络自适应退避策略

针对无人机自组织网络,结合Q-Learning和深度神经网络,提出一种自适应退避策略,以提高基于竞争的MAC协议通信性能.以Matlab为仿真平台,仿真比较了自适应退避策略与二进制指数退避策略的性能.     

A hybrid chemical modification strategy for monocrystalline silicon micro-grinding: Experimental investigation and synergistic mechanism

For high performance manufacturing of micro parts and features, a hybrid chemical modification strategy is proposed to decrease critical energy barrier of mechanical removal of hard and brittle crystal material by refining localized machining condition. The strategy, namely UV-light and IR-laser hybrid chemical modification (UVIR-CM) strategy, includes two steps, an ultraviolet light (UV-light) catalytic advanced oxidation and an infrared laser (IR-laser) assisted selective modification based on Fenton liquid–solid reaction for monocrystalline silicon. The modification effects of UVIR-CM strategy were investigated by surface morphology micro-observation, cross-section transmission electron microscopy (TEM) observation, Raman spectroscopy analysis and nanoindentation test. Experimental results demonstrated that varied degrees of laser texturing appeared on different strategy samples’ IR-laser scanned area. And the IR-laser thermal damage has been successfully inhibited due to the refraction and reflection of energy by bubbles in liquid medium. But for the UVIR-CM strategy, a uniform and amorphous silicate layer is detected in a certain boundary. The UV-light promotes oxidation cycle ability of the chemical solution and ensures sufficient oxide modified layer for subsequent step. Attributing to synergism of photochemical, photothermal and kinetic effects induced by IR-laser, the modified layer displays layered structure with about 600 nm thickness, (2.7 ± 0.60) GPa nanohardness, and (93.7 ± 22.9) GPa indentation modulus. And the layered structure is amorphous layer, nanocrystal and micro-twins layer from the surface to the interior of sample. Consequently, it reveals that the subsequent mechanical removal will become easy due to decreasing energy barrier of monocrystalline silicon in selective area. Meanwhile, its original excellent mechanical properties also are maintained under a certain depth. The results contribute to develop a novel combined micro-machining technology to achieve collaborative manufacturing of structure shape and surface integrity for micro parts and feature.     

Transition control of a tail-sitter unmanned aerial vehicle with L1 neural network adaptive control

The main task of this work is to design a control system for a small tail-sitter Unmanned Aerial Vehicle(UAV) during the transition process. Although reasonable control performance can be obtained through a well-tuned single PID or cascade PID control architecture under nominal conditions, large or fast time-varying disturbances and a wide range of changes in the equilibrium point bring nonlinear characteristics to the transition control during the transition process, which leads to control prec...     

基于低轨全覆盖卫星星座的反向缝建链策略

低轨卫星星座的拓扑设计是天地一体化网络部署中较为重要的一环。在低轨卫星网络中，如何设计星座拓扑来提升卫星网络的稳定性与传输性能，是亟待解决的问题。提出一种基于轨道覆盖带方法的低轨持续全覆盖卫星星座设计方法，通过该方法构建低轨卫星星座，满足覆盖性能，可有效减少卫星切换的次数。基于构建的星座拓扑，制定邻轨k最近邻星的反向缝建链策略，优化设计链路长度和链路持续时长，获取网络传输性能与稳定性的平衡。仿真结果表明:通过上述方法设计出的星座，在满足对地持续全覆盖性能的情况下，相较于轨道覆盖带方法切换次数减少10%;邻轨k最近邻星策略相较于最短建链策略，拓扑稳定性能提升79.62%，使网络拓扑稳定性与传输性能达到更优的平衡。     

动态跳波束策略中的自适应波束功率分配算法

摘要：多波束卫星发射机的成本很高，同时地面小区的通信需求和通信优先级一直处在动态变化中。通过研究一种动态波束跳跃策略，实现在卫星资源受限和较少发射机数量约束下的广域覆盖和按需服务。区别于传统的分簇波束跳变思想，为了提高卫星系统的频谱效率，考虑在整个频率带宽上应用全局波束跳变。因此考虑在共信道干扰背景下，提出一种新型服务质量指标来衡量波束跳变结果。在卫星资源有限的情况下，各波束提供的通信容量不能满足地面小区的业务请求，基于粒子群算法选择的波束跳动图案，提出了一种自适应波束功率分配算法。该算法通过优先级加权，最小化波束业务容量需求差值，进而提高服务质量水平。最后，通过仿真验证了所提算法的性能优越性。     

大气环境监测卫星地方时控制策略优化

针对大气环境监测卫星地方时的控制和优化问题，从太阳同步轨道卫星的地方时漂移规律入手，建立了地方时漂移估计模型，给出了通过改变倾角来调节地方时漂移的控制策略。在此基础上，采用遗传算法对控制策略进行了优化，讨论了相关算子的选择，最终得到了燃料有限情况下的最优控制曲线。优化结果表明:不限燃料情况下，大气环境监测卫星可通过寿命内一次倾角控制实现小于6.6 min的地方时偏差。此外，为了保证地方时偏差小于15 min的指标要求，卫星至少需要进行一次0.07°的倾角控制。