节流水平对气液针栓喷注单元雾化特性的影响

为了分析气液针栓喷注单元雾化特性和雾化机制，采用背光成像技术和相位多普勒（PDA）系统进行试验研究，获得了雾化模式、体积流量分布、索泰尔平均直径（SMD）分布和速度场随节流水平的变化规律。结果表明：气液针栓喷注单元雾场形态为扇形雾场，雾化模式为剪切破碎。体积流量沿径向呈单峰形分布，随着节流水平降低，雾场外缘向中心收缩。SMD沿径向呈现递增规律，雾化最好的区域分布在雾场中心和两侧。SMD随节流水平增加而增大。当动量比不变时，节流水平对SMD的分布范围影响很小。针栓头部下方的中心回流区轴向尺寸随着节流水平降低而减小。     

新型凹入式螺旋结构增爆器的实验研究

本实验以脉冲爆震火箭发动机(简称PDREs)系统为实验平台,以液态航空煤油作为燃料,以压缩氧气作为氧化剂,以压缩氮气作为隔离气,分别对安装三种不同截面形式(半圆形、方形、三角形)的凹入式螺旋结构增爆器以及作为基准的Shchelkin螺旋结构增爆器进行了实验研究。实验结果表明,三种不同截面的凹入式增爆器均能有效强化爆燃向爆震转变(DDT)过程,在长径比为12.17的增爆器中均获得了充分发展的爆震波,实现了成功起爆。在流阻损失方面,半圆形凹入式螺旋结构表现出了最好的性能,其推力比Shchelkin螺旋的基准推力高出12个百分点。在多次实验过程中发现,凹入式螺旋结构比Shchelkin螺旋结构更不易烧蚀,工作可靠性更高。     

往复节流式正脉冲发生器性能分析CSCD

在石油开采与钻探领域,脉冲发生器作为旋转导向系统井下信号传输系统的重要组成部分,提高压力脉冲幅值有助于提升旋转导向系列产品的市场竞争力。为了揭示其工作原理及提高压力脉冲幅值,基于计算流体动力学,利用用户自定义函数(UDF)、动网格技术、非牛顿流体模型,借助Fluent平台对往复节流式正脉冲发生器进行了动态数值实验。利用离散形式的动量方程将主阀体与电磁阀的被动运动转变为主动运动,选择适用于k-ε湍流模型的赫-巴非牛顿流体本构方程描述泥浆,提高了计算的收敛性与运动的可控性。基于非牛顿流体的流固耦合方法,更真实地模拟了脉冲器在井下工作过程。结果表明限流环内径越小或入口排量越大,则压力脉冲幅值与信号发生频率越大。     

超低空反导中的多径效应仿真

为得到超低空背景下目标特性参数对脉冲雷达导引头目标检测的影响,根据导引头和目标的空间几何关系,推导了波程差、多普勒频移、相位差的表达式,并结合比例导引法建立多径效应仿真模型。针对目标飞行参数进行仿真,并结合仿真结果对参数的影响效果进行了分析,为导引头末制导段的弹道规划与有效地规避多径效应提供参考依据。     

Design and analysis of a novel hybrid cooling method of high-speed high-power permanent magnet assisted synchronous reluctance starter/generator in aviation applications

To improve the heat dissipation performance, this paper proposes a novel hybrid cooling method for high-speed high-power Permanent Magnet assisted Synchronous Reluctance Starter/Generator (PMaSynR S/G) in aerospace applications. The hybrid cooling structure with oil circulation in the housing, oil spray at winding ends and rotor end surface is firstly proposed for the PMaSynR S/G. Then the accurate loss calculation of the PMaSynR S/G is proposed, which includes air gap friction loss under oil spray cooling, copper loss, stator and rotor core loss, permanent magnet eddy current loss and bearing loss. The parameter sensitivity analysis of the hybrid cooling structure is proposed, while the equivalent thermal network model of the PMaSynR S/G is established considering the uneven spraying at the winding ends. Finally, the effectiveness of the proposed hybrid cooling method is demonstrated on a 40 kW/24000 r/min PMaSynR S/G experimental platform.     

A new approach for pulse amplitude measurement using Lagrange’s interpolation for radiation or particle detectors

In radiation detector signal processing, usually, the charge-sensitive preamplifier converts the small charge signal coming from the semiconductor-based detector into voltage form and then the signal is further amplified to measure the energy of the incoming radiation. The voltage pulse from a charge-sensitive preamplifier (CSPA) is amplified using a shaping amplifier which reduces the signal bandwidth. To achieve better energy resolution, precise measurement of the peak amplitude of shaping amplifier output is required. The signal processing methods are available in which the signal from the charge-sensitive preamplifier can be directly digitized using high-speed Analog to Digital Converters (ADC), and then further signal processing such as gain and shaping is carried out inside the Field Programmable Gate Arrays (FPGA). For multiple detector systems, digital signal processing methods are quite difficult to implement in Field Programmable Gate Arrays (FPGA). In this context, The development of an alternative technique is initiated that uses a charge-sensitive preamplifier, shaping amplifier, low sampling analog-to-digital converter, and FPGA, where LaGrange’s interpolation technique is implemented in FPGA to precisely measure the peak of the analog pulse. In this paper, the comparison of the proposed method with other pulse amplitude measurement techniques is discussed. Results show that the implemented technique gives similar energy resolution compared to digital pulse processing and standard peak detector-based techniques.