考虑喷注流强分布的纵向稳定性建模与分析

喷注器流强分布是除声学阻尼装置以外使液体火箭发动机稳定工作的重要措施,通过控制喷注流强分布使推进剂的燃烧尽量远离主要振型的波腹区,减少热声耦合振荡的能量源,从而达到抑制高频振荡的效果。因此,建立喷注流强分布与稳定性之间的综合分析模型,研究流强分布的不稳定性抑制特性具有重要实际意义。针对采用自击式喷嘴器、液滴蒸发作为燃烧速率控制过程的某自燃推进剂缩尺燃烧室高频纵向燃烧不稳定问题,近似采用蒸发速率峰值区代替集中燃烧释热区,引入燃烧室三维声学控制方程以考虑多喷嘴条件下燃烧响应空间分布,建立了针对喷注器流强分布条件下的高频纵向燃烧稳定性分析模型,并对喷注流强的稳定性抑制特性进行了分析,给出了不同分布流强下燃烧室一阶纵向信号的增长率变化规律。研究表明,喷注流强分布有利于燃烧室稳定,"驼峰区"喷注孔径的增大对改善高频纵向不稳定性更为显著,"驼峰区"流强增加30%,相应的增长率降低15%。     

脉冲等离子体源控制航天器表面充电电位的研究

在空间环境运行的航天器存在表面充电现象,而航天器表面充电引发的静电放电是导致航天器异常及故障的重要原因之一。因此,在航天器设计和应用中,必须对航天器表面电位采取必要的控制和防护措施。文章介绍了用脉冲等离子体源进行航天器表面充电电位主动控制的研究。通过模拟实验和实验数据分析,证实了用脉冲等离子体源能有效地控制航天器表面充...     

Comparative study of lunar mission requirements and onboard propulsion system performance

In recent years, the lunar explorer programs, suspended for a long time, have resumed again with the rapid development of low cost and high-level technologies. As a result, several nations have made a success of lunar exploration programs with their own orbiters. Unlike a satellite orbiting the earth, the optimal design of an onboard propulsion system of a lunar orbiter is a major issue because it is not simple to make the orbiter arrive accurately at another planet far from the earth. Hence, a close attention is required to select and develop an appropriate type of the onboard propulsion system based on given mission requirements of a lunar orbiter. To do this, this study first surveys several lunar orbiters launched since 1990 and their major mission requirements. Then, it summarizes the technical trends of the onboard propulsion systems of the recent lunar orbiters and their key design and performance specifications through trade-off studies. By comparing these features, the present study investigates which lunar mission requirements are critically important, and how they can effect on the overall performance of an onboard propulsion system. Based on these investigations the major objective of the present study intends ultimately to set up a fundamental baseline in selecting and developing an appropriate type of onboard propulsion system of a lunar orbiter.     

基于制导信息的一维波束可控随机脉位脉冲多普勒引信技术研究

针对空空导弹引信的任务特点,综合采用了基于制导信息的起爆控制算法技术、自适应调整天线波束倾角技术、基于频域信号处理的数字信号处理技术设计了总体技术方案.仿真分析和试验表明,系统实现了对作战飞机、导弹等不同类型目标的智能探测,提高了对目标的探测灵敏度和抗干扰能力.     

无线电引信接收机测试难点及解决途径

针对某型号无线电引信接收机测试设备研制,对测试中遇到的技术难点进行了探讨,给出了解决途径。研制的难点体现在ns级高速度脉冲调制、ns级时序与宽度可调节多路脉冲生成,脉冲多普勒调制信号大范围量程调节与泄漏脉冲电路模拟。其中的泄漏脉冲叠加到脉冲多普勒信号的功能,成功地模拟了引信科研生产中特定现象,在测试设备研制中属首次。测试结果和使用情况表明,所研制的设备达到了预期的技术要求,满足使用。方法在类似型号无线电引信接收机测试测试中具有参考意义。     

CubeSail: A low cost CubeSat based solar sail demonstration mission

CubeSail is a nano-solar sail mission based on the 3U CubeSat standard, which is currently being designed and built at the Surrey Space Centre, University of Surrey. CubeSail will have a total mass of around 3 kg and will deploy a 5 × 5 m sail in low Earth orbit. The primary aim of the mission is to demonstrate the concept of solar sailing and end-of-life de-orbiting using the sail membrane as a drag-sail. The spacecraft will have a compact 3-axis stabilised attitude control system, which uses three magnetic torquers aligned with the spacecraft principle axis as well as a novel two-dimensional translation stage separating the spacecraft bus from the sail. CubeSail’s deployment mechanism consists of four novel booms and four-quadrant sail membranes. The proposed booms are made from tape-spring blades and will deploy the sail membrane from a 2U CubeSat standard structure. This paper presents a systems level overview of the CubeSat mission, focusing on the mission orbit and de-orbiting, in addition to the deployment, attitude control and the satellite bus.     

来流马赫数对射流矢量喷管内流场影响的动态模拟

以二维拉瓦尔喷管为对象,利用非定常雷诺平均N—S方程和RNGκ-ε两方程湍流模型对激波控制的射流推力矢量喷管非定常流场进行研究,分析了来流马赫数连续变化对喷管流场的影响,得出喷管推力性能的变化规律。结果表明：在亚声速来流中,轴向力随飞行马赫数增加而小幅上升,侧向力变化不大;在跨声速来流中,轴向推力和侧向推力都急剧下降;...     

超音速混合及燃烧的强化技术

超音速气流中燃料与空气混合直接关系到燃烧效率，强化超音速混合及燃烧已成为各国专家正在解决的关键问题之一。本文在广泛搜集资料的基础上，归纳了已有的强化技术，为开展强化超音速混合及燃烧技术的研究作了必要的准备。     

一种脉宽调制式舵系统舵机模拟器设计方法

针对脉宽调制式舵系统放大器电性能高效测试的问题,提出一种基于移相脉冲计数的舵机模拟器设计方法。该模拟器硬件由电平转换单元、PWM占空比采集单元、数字PID控制单元和DAC单元四部分组成,软件主要采用移相脉冲计数法和数字PID控制算法,实现了真实舵机电性能的替代。同时由单通道扩展的多通道模拟器的应用,能够大幅节约舵机放置空间,缩短研制周期,在短时间内实现脉宽调制式放大器电性能大批量测试的目的。试验结果表明,该舵机模拟器能够模拟真实电动舵机的电性能特性,系统具有实时性好、测试效率高、操作性好的优点,及较高的应用价值。     

高压脉冲信号源设计

提出了一种高压脉冲信号源的设计思路和实现方法,它解决了在某些专用测试设备校准中无可用的标准信号源问题,也为其他类似问题的解决提供了参考。