激波过弯道绕双圆柱流场

采用单曝光光栅干涉或双曝光光栅干涉，研究激波过弯道绕双圆柱传播的微波流场。采用单曝光法，成功显示入射激波到第一圆柱上的反射、绕射，到达第二圆柱上的反射、绕射。在同一底片上采用双次曝光，第一次脉冲记录直道上的平面波，第二次脉冲记录激渡过弯道绕双圆柱流场。这些照片对于研究反射、绕射及它们边界的相互作用是很有用的。     

用Radon变换迭代法重建含有遮挡物的三维折射率场

本文通过计算机模拟研究，结合气体折射率场的光验知识．考查了将Ｒａｄｏｎ变换迭代法用于光学干涉层析计量含有遮挡物的三维折射率场的重建精度。作为一个应用实例，测量和计算了某一截面的气体温度分布，并与热电偶测量的值进行了比较。     

疲劳裂纹扩展随机过程相关参数的估计

对数正态随机过程模型是可靠性与损伤容限分析中常用的裂纹扩展随机模型.在裂纹扩展对数正态随机过程模型的基础上,建立了由试验数据估计一般平稳正态随机过程相关参数的方法.应用这种方法可以直接由试验数据估计随机过程的相关参数.同时,给出了用Monte-Carlo方法估算置信区间的方法.最后,给出了用具体试验数据,这组试验数据共有237个数据点,估计随机过程相关参数的算例.     

Noise in wireless systems from solar radio bursts

Solar radio bursts were first discovered as result of their interference in early defensive radar systems during the Second World War (1942). Such bursts can still affect radar systems, as well as new wireless technologies. We have investigated a forty-year record of solar radio burst data (1960–1999) as well as several individual radio events in the 23rd solar cycle. This paper reviews the results of a portion of this research. Statistically, for frequencies f  1 GHz (near current wireless bands), there can be a burst with amplitudes >10³ solar flux units (SFU; 1 SFU = 10⁻²² W/m²) every few days during solar maximum conditions, and such burst levels can produce problems in contemporary wireless systems.     

An energy-based coupling degradation propagation model and its application to aviation actuation system

The degradation of components in complex mechatronic systems involves multiple physical processes which will cause coupling interactions among nodes in the system. The interaction of nodes may be carried out not only by physical connections but also by the environment which cannot be described by single network using the traditional methods. In order to give out a unified model to quantitatively describe the coupling degradation spreading by both physical connections and environment, a novel Energy-Flow-Field Network (EFFN) and a coupling degradation model based on EFFN are proposed in this paper. The EFFN is driven by energy flow and the state transition of spatially related nodes is triggered by the dissipation energy. An application is conducted on aviation actuation system in which the degradation spreading by fluid-thermal-solid interaction is considered. The degradation path and the most probable fault reason can be obtained by combining the state transition and energy output of nodes, which is consistent with the given scenario.     

棘爪扁簧断裂故障分析及制造工艺的改进

通过设计计算、对比分析、工艺复装、工艺试验等方法对棘爪扁簧使用中断裂故障进行了分析,并针对性地从设计、工艺两方面进行了改进,经鉴定与试车验证,措施有效,为航空发动机同类零件的研究提供了经验。     

某发动机调节器自动检测异常故障分析

针对某型发动机自动调节器自动检测异常的故障现象,对产生发动机自动调节器自动检测异常的原因进行了深入地研究分析,并提出了针对性的预防措施。     

均匀各向同性大气湍流对声爆传播特性的影响

基于离散Fourier模态有限和生成的随机大气湍流场，采用修正波形参数方法，开展了均匀各向同性大气湍流对典型超声速客机声爆传播特性的影响分析。计算采用的超声速客机模型为自行生成的简化超声速公务机模型。首先，应用航空工业空气动力研究院自主研制的CFD软件ARI_Overset在三维空间求解Navier-Stokes方程，得到作为声爆远场传播初始值的近场空间压力分布；其次，基于Von Karman能量谱，采用离散Fourier模态有限和形式生成随机均匀各向同性大气湍流场；最后，采用修正波形参数方法模拟了声爆信号在随机速度湍流场中的传播过程。数值结果表明：各向同性大气湍流对于地面声爆特征有重要影响。与无湍流状态相比，均匀各向同性大气湍流使得地面声爆特征增强的概率约为55%，使得地面声爆特征减弱的概率约为45%，故总体而言大气湍流效应更倾向于增强地面声爆特征；均匀各向同性大气湍流对于声爆传播路径影响相对较小，但是这一变化仍会导致地面信号接收点的不确定性。     

DME Interference mitigation for L-DACS1 based on system identification and sparse representation

L-band digital aeronautical communication system 1 (L-DACS1) is a promising candi-date data-link for future air-ground communication, but it is severely interfered by the pulse pairs (PPs) generated by distance measure equipment. A novel PP mitigation approach is proposed in this paper. Firstly, a deformed PP detection (DPPD) method that combines a filter bank, correlation detection, and rescanning is proposed to detect the deformed PPs (DPPs) which are caused by mul-tiple filters in the receiver. Secondly, a finite impulse response (FIR) model is used to approximate the overall characteristic of filters, and then the waveform of DPP can be acquired by the original waveform of PP and the FIR model. Finally, sparse representation is used to estimate the position and amplitude of each DPP, and then reconstruct each DPP. The reconstructed DPPs will be sub-tracted from the contaminated signal to mitigate interference. Numerical experiments show that the bit error rate performance of our approach is about 5 dB better than that of recent works and is closer to interference-free environment.     

某型飞机通信电台干扰油量系统故障分析

针对某型飞机通信电台干扰油量系统故障，分析了油量测量系统的原理和电磁干扰机理，研究了故障发生的原因，制定了抑制干扰的措施，解决了一直困扰修理的油量指示系统跳变问题，提高了飞机修理质量。