月球探测器软着陆最优末制导策略

在制动火箭推力幅值满足连续可变的前提下,研究了月球探测器软着陆末端的垂直下落过程中的控制问题。基于线性系统跟踪控制理论,利用线性系统中的模型参考跟踪控制的方法设计了一种对指定轨迹进行跟踪的制动方案。同时为了满足耗燃最优性和安全性,根据最优化理论,对控制律中的参数进行优化,最终确定系统的控制律。仿真结果表明该设计方法是简单、有效的。     

基于51单片机的放大和整流组件试验器的设计

提出了一种基于51单片机平台开发的某型主力运输机放大和整流组件试验器设计方案。通过硬件设计和软件设计，并经过调试验证，结果表明该试验器能完成对放大和整流组件的所有性能的测试，有方便、快捷等特点，提高了设备的检测效率。     

A simulation study on the mode conversion process from slow Z-mode to LO mode by the tunneling effect and variations of beaming angle

For a particular angle of incidence wave, it is possible for a slow Z-mode wave incident on an inhomogeneous plasma slab to be converted into an LO mode wave. But for another wave normal angle of the incident wave, it has been considered impossible, since an evanescence region exists between two mode branches. In this case we expect that the mode conversion takes place through the tunneling effect. We investigate the effect of the spatial scale of the density gradient on the mode conversion efficiency in an inhomogeneous plasma where the mode conversion can occur only by the tunneling effect. We use the computer simulation solving Maxwell’s equations and the motion of a cold electron fluid. By considering the steepness of the density gradient, the simulation results show the efficient mode conversion could be expected even in the case that the mismatch of the refractive indexes prevents the close coupling of plasma waves. Also, we show for these cases the beaming angle does not correspond to Jones’ formula. This effect leads to the angles larger and smaller than the angle estimated by the formula. This type of mode conversion process becomes important in a case where the different plasmas form a discontinuity at their contact boundary.     

月面无人自主采样返回任务动力下降点确定及验证

动力下降点确定是实施月面软着陆的重要环节，是多系统间复杂迭代的过程，涉及轨道设计、制导律设计、着陆目标的采样区确定、着陆及起飞安全分析。其设计结果直接影响了最终着陆点的位置和着陆过程的着陆安全，也间接影响采样安全和采样工程目标的实现结果。针对嫦娥五号在实施月面软着陆前确定动力下降点的任务需求，提出了通过多次轨道控制与最优标称制导轨迹搜索联合控制策略的动力下降点确定方法。首先，根据月面无人自主采样返回任务设计总结了动力下降点确定原理和约束条件；然后，详细论述了月面无人自主采样返回任务软着陆过程动力下降点确定方法；最后，通过嫦娥五号在着陆前主要的几次轨控实施结果分析了其对动力下降点的影响，同时综合了着陆区地形分析及着陆、起飞安全性分析，对动力下降点进行确定并根据最终在轨飞行结果进行验证。验证结果表明，基于“逐次逼近寻优方法”的月面软着陆环节动力下降点的确定方法有效，可以为后续地外天体软着陆等任务提供参考和借鉴。     

航天器外表面导电面积对朗缪尔探针科学探测的影响

朗缪尔探针的科学探测会受到航天器外表面导电面积与朗缪尔探针传感器有效面积之比大小的影响。如果航天器的外表面导电面积不足够大,朗缪尔探针以扫描电压模式工作时,就会造成航天器地电位的扰动,进而导致朗缪尔探针测量结果的偏差。分析了此问题的物理原理,并进行了相应的理论计算。子午工程探空火箭有效载荷朗缪尔探针在进行科学探测的同时,测量了火箭外表面导电面积与朗缪尔探针传感器有效面积之比不足造成的扰动,测量结果与理论分析基本一致。     

环刷刷丝接触压力检测系统设计

环刷是导电滑环的重要组成部件,其接触压力是滑环使刷丝变形后产生的刷丝对滑环的作用力。环刷刷丝接触压力值微小,影响因素较多,但环刷刷丝接触压力的大小将直接关系着导电滑环的技术性能和使用寿命。本文针对环刷的特点详细研究了环刷刷丝接触压力的测量方法和技术,并设计了一套环刷刷丝接触压力检测系统,实现了对环刷刷丝接触压力的自动精密测量。     

A scalable bus-based attitude control system for Solar Sails

Recently, there has been a renewed interest in Solar Sails as an alternative means of space propulsion. Many different attitude control systems have been designed for Solar Sails taking advantage of the centre-of-mass (CM)/centre-of-pressure (CP) offset while utilising the main sail structure to position the actuators. However, by attaching actuators to the main sail, these systems increase the risks involved in the deployment subsystem.     

飞行器热防护与利用一体化系统实验与模拟

通过设计一种基于主动冷却的点阵桁架结构,在降低飞行器质量的同时,实现有效的热防护效果,并在该结构中加入半导体温差发电装置,将产生的气动热转化为电能,可用于飞行器小型用电设备供电.对该热防护与利用一体化系统进行了实验研究.在不同工况下,温差发电功率远大于主动冷却系统的泵功消耗,可实现主动冷却系统的自驱动.通过添加管内表面...     

用于电场探头校准的一种新设备——吉赫横电磁波传输室(GTEM小室)

介绍了近年来在电磁兼容性测量及场强测量领域已经广泛应用的吉赫横电磁波传输室（GTEM小室）。提出了将其用于校准电场探头的条件和方法。     

Thermal drill sampling system onboard high-velocity impactors for exploring the subsurface of Europa

The planned Europa Jupiter System Mission (EJSM) will provide a unique opportunity to place scientific instruments onto the surface of Jupiter’s moon Europa in the late 2020s. After the Galileo mission, this will be a long awaited chance to have a close glimpse into some of the mysteries of this moon. Care must be taken in the choice of in-situ science that will be undertaken on the surface.