铝合金T型材拉弯成形的有限元模拟

针对目前拉弯成形中的问题,采用有限元模拟的方法,对带下陷拉弯过程进行计算机仿真,得到优化后的工艺参数,避免了盲目的试拉,提高了加工效率,降低了拉弯成本,积累了带下陷拉弯成形的经验,提高了公司拉弯工艺水平。     

双星预警系统弹道参数估计及一些问题分析

主要讨论由2颗地球同步轨道卫星组成的卫星预警系统(简称双星预警系统)中弹道导弹参数的估计问题。阐述了主动段运动的建模问题和弹道数据处理方法,考虑到微分求速的重要性,采用了带光滑约束的样条拟合方法。结合预警系统对弹道导弹预警的具体情况,分别讨论了预警系统下的发射原点估计、射向估计、关机时刻估计、关机点弹道参数估计、落点估计等问题。还讨论了系统中存在的两个问题的分析与解决。模型及分析方法均经过理论和仿真的验证,可应用于双星预警系统下的实际预警的研究。     

某起落架正常收／放系统失效原因分析

正确运用246雷达天线“正常或应急”液压操纵开关和液压马达壳体回油“正常或应急”开关的工作状态，关系到飞机液压操纵系统的安全性。若天线液压操纵开关和马达壳体回油开关配合不当，将引起飞机液压操纵系统失效。     

发动机零部件稳态应力计算的状态函数法

借鉴发动机气动参数相似准则的基本思想, 提出了根据典型工作点的应力结果直接推算出其它状态点的状态函数法.利用该方法可以快速计算发动机任意状态点的稳态应力、位移、温度, 可以便捷地为构件寿命预估提供应力谱, 使发动机零部件寿命计算过程大大简化.该方法在发动机零部件寿命预估和管理等方面有较高的实用价值.      

Effects of yaw-roll coupling ratio on lateral-directional aerodynamic characteristics

Experimental investigation of large amplitude yaw-roll coupled oscillations was conducted in a low-speed wind tunnel using an aircraft configuration model. A special test rig was designed and constructed to provide different coupled motions from low to high angles of attack.A parameter ‘‘coupling ratio" was introduced to indicate the extent of yaw-roll coupling. At each pitch angle, seven coupling ratios were designed to study the yaw-roll coupling effects on the lateraldirectional aerodynamic characteristics systematically. At high angles of attack, the damping characteristics of yawing and rolling moments drastically varied with coupling ratios. In the coupled motions with the rotation taking place about the wind axis, the lateral-directional aerodynamic moments exhibited unsteady characteristics and were different from the ‘‘quasi-steady" results of the rotary balance tests. The calculated results of the traditional aerodynamic derivative method were also compared with the experimental data. At low and very high angles of attack, the aerodynamic derivative method was applicative. However, within a wide range of angles of attack, the calculated results of aerodynamic derivative method were inconsistent with the experimental data, due to the drastic changes of damping characteristics of lateral-directional aerodynamic moments with yaw-roll coupling ratios.     

基于SE模块改进Xception的动物种类识别

Xception是Inception网络的一种极端化表现,在与Inception v3参数相近的情况下,它能够达到更高的准确度。由于神经网络提取的特征不一定都是有用特征,因此以Xception为基础,将SE(Squeeze and Excitation）模块加入该网络,调整特征通道的权重,使得网络的精确度得到提高。通过实验,融合SE模块的Xception网络训练精确度分别在Oxford-IIIT Pet数据集和CUB_200_2011数据集上提升了1%~1.7%和0.8%~1%,证明了SE模块能够进一步提升Xception的精确度。将改进后的Xception应用到动物种类识别中,根据精确度曲线对实验策略调整改进,最终在测试集上获得95.63%的识别率。     

Design and analysis of a truss deployable antenna mechanism based on a 3UU-3URU unit

Space deployable structures with large calibers, high accuracy, and large folding ratios are indispensable equipment in the aerospace field. Given that the single-DOF 3RR-3RRR deployable unit cannot be fully folded, this study proposes a 3UU-3URU deployable unit with two kinds of DOF: folding movement and orientation adjustment. First, based on the G-K formula, the DOF of the 3UU-3URU unit is analyzed. Then, the 3UU-3URU unit is used to construct a deployable truss antenna with a curved surface, and the DOF of the whole deployable antenna containing multiple 3UU-3URU units is calculated. The structural design of a deployable antenna with two loops is carried out with specific parameters and geometric relations. Next, a DOF simulation of a basic combination unit composed of three 3UU-3URU units is performed. Finally, a prototype of the basic combination unit is manufactured, and the DOF of the mechanism is experimentally verified.     

A novel approach for predicting inlet pressure of aircraft hydraulic pumps under transient conditions

Cavitation caused by insufficient suction is a major factor that influences the life of aircraft pumps. Currently, pressurizing the tank can solve the cavitation problem under steady large-flow conditions. However, this method is not always effective under transient conditions (from zero flow to full flow in a very short time). Moreover, to apply and design other measures, such as a boost impeller, the suction dynamics during the transient period must be investigated. In this paper, a novel approach based on the pressure wave propagation theory is proposed for predicting the inlet pressure of an aircraft pump under transient conditions. First, a dynamic model of a typical aircraft pump is established in the form of differential equations. Then, the transient flow model of the inlet line is described using momentum and continuity equations, and the governing equations are discretized by the method of characteristics and the finite difference method. The simulated results are in good agreement with the results from verification tests. Further simulation analysis indicates that the wave velocity and transient time may influence the inlet and reservoir pressure as well as the size of the inlet line. Finally, solutions for upgrading the inlet pressure are discussed. These solutions provide guidelines for designing inlet installations.     

关于大容量高速立式电机加装大转动惯量飞轮的设计研究

电机在发生事故突然失电时,为确保系统安全,要求电机能拖动设备依靠自身惯量,继续运转2 min。由于电机自身惯量远小于系统惯量要求,因此需在电机本体上加装大直径、大重量飞轮,以提供足够的惯量。在大容量、高速立式电动机加装大转动惯量飞轮后,电机的稳定运行变得至关重要,因此对电机自身的刚度、轴系及结构设计的合理性需进行验证。针对电机的关键点结构设计及计算,并通过现场运行,对电机的可靠性进行了验证。这为电机的工程运用提供参考。     

某航天器输氢管道系统结构完整性评估

为保障某航天器在服役年限内不发生事故,针对航天器上采用插入焊接技术的精密管道系统进行结构完整性评估。在考虑到系统存在整圈的环形未焊透缺陷基础上,结合工程实践,假设在焊接区域存在更危险的平面缺陷。首先,开展高压气相热充氢试验下的标准拉伸和三点弯试验得到管道系统材料"J-75"在临氢环境下应力应变曲线和断裂韧性。其次,采用有限元程序计算系统在内压、惯性载荷与离面位移作用下的应力分布,考虑到间隙配合中的不确定性,改变模型中的最大间隙多次模拟计算,发现最大应力位置基本不变,以此区域作为假想缺陷的具体萌生区域。最后,采用失效评估图（FAD）方法对存在4种缺陷模式的系统分别进行结构完整性评估。通过引入安全裕度的概念,发现系统在含有初始尺寸（0.15 mm）的4种平面缺陷时,均处于安全状态,并且安全裕度都在2倍以上;通过工程临界分析（ECA）发现随着缺陷尺寸的增大,系统中含有缺陷2（位于管道焊接区域最大应力处的轴对称平面且沿焊深方向扩展的缺陷）时最为危险,且当缺陷深度超过0.61 mm时将断裂失效;考虑到测试数据的弥散性,针对系统最危险的模式,以安全裕度为可靠性指标,将失效评估图方法与可靠性评价相结合,得到系统在含有尺寸为0.15 mm的缺陷2情况下保有足够安全裕度的可靠性下限值超过0.999 5。