考虑轨道摄动的外热流计算分析

为改进传统外热流算法未考虑外热流经多次反射后的吸收和国外商业软件未考虑轨道摄动及太阳矢量变化对外热流的影响等不足,重新定义了外热流角系数和外热流辐射传递因子,综合SGP4轨道模型和Gebhart方法,给出了考虑摄动等因素的辐射传递因子和轨道外热流计算模型,以及相应的计算流程。通过仿真分析论证了考虑多次反射及摄动等因素的重要性。     

Experimental investigation and correlation development of jet impingement heat transfer with two rows of aligned jet holes on an internal surface of a wing leading edge

Extensive experimental studies on the heat transfer characteristics of two rows of aligned jet holes impinging on a concave surface in a wing leading edge were conducted, where50000 Rej 90000, 1.74 H/d 27.5, 66° a 90°, and 13.2 r/d 42.03. The finding was that the heat transfer performance at the jet-impingement stagnation point with two rows of aligned jet holes was the same as that with a single row of jet holes or the middle row of three-row configurations when the circumferential angle of the two jet holes was larger than 30°. The attenuation coefficient distribution of the jet impingement heat transfer in the chordwise direction was so complicated that two zones were divided for a better analysis. It indicated that: the attenuation coefficient curve in the jet impingement zone exhibited an approximate upside-down bell shape with double peaks and a single valley; the attenuation coefficient curve in the non-jet impingement zone was like a half-bell shape, which was similar to that with three rows of aligned jet holes; the factors,including Rej, H/d and r/d, affected the attenuation coefficient value at the valley significantly.When r/d was increased from 30.75 to 42.03, the attenuation rates of attenuation coefficient increased only by 1.8%. Consequently, experimental data-based correlation equations of the Nusselt number for the heat transfer at the jet-impingement stagnation point and the distributionof the attenuation coefficient in the chordwise direction were acquired, which play an important role in designing the wing leading edge anti-icing system with two rows of aligned jet holes.     

Aerothermodynamic and stability analyses of a deployable re-entry capsule

Recent research projects, in the field of atmospheric re-entry technology, are focused on the design of deployable, umbrella-like Thermal Protection Systems (TPSs). These TPSs are made of flexible high temperature resistant fabrics, folded at launch and deployed in space for de-orbit and re-entry operations. In the present paper two possible sphere–cone configurations for the TPS have been investigated from an aerodynamic point of view. The analyzed configurations are characterized by the same reentry mass and maximum diameter, but have different half-cone angles (45° and 60°). The analyses involve both the evaluation of thermal and aerodynamic loads and the assessment of the capsule longitudinal stability. The aerothermodynamic analysis has been performed for the completely deployed heat shield in transitional and continuum regimes, while the longitudinal stability has been analyzed in free molecular, transitional and continuum regimes, also taking into consideration the heat shield deployment sequence at high altitudes.     

Reconfigurable Flight Control Design for Combat Flying Wing with Multiple Control Surfaces

With control using redundant multiple control surface arrangement and large-deflection drag rudders,a combat flying wing has a higher probability for control surface failures.Therefore,its flight control system must be able to reconfigure after such failures.Considering three types of typical control surface failures(lock-in-place(LIP),loss-of-effectiveness(LOE) and float),flight control reconfiguration characteristic and capability of such aircraft types are analyzed.Because of the control surface redundancy,the aircraft using the dynamic inversion flight control law already has a control allocation block.In this paper,its flight control configuration during the above failures is achieved by modifying this block.It is shown that such a reconfigurable flight control design is valid,through numerical simulations of flight attitude control task.Results indicate that,in the circumstances of control surface failures with limited degree and the degradation of the flying quality level,a combat flying wing adopting this flight control reconfiguration approach based on control allocation could guarantee its flight safety and perform some flight combat missions.     

着陆姿态对地外天体表层采样的影响研究

表层采样技术是获得地外天体特性的重要手段,是完成地外天体采样任务的一项关键技术。文章结合4自由度表层采样装置的特点,建立了表层采样装置的逆运动学模型,分析了极限着陆姿态下表层采样装置安装位置在当地参考坐标系中的变化,并针对一次封装与二次封装过程中表层采样装置的位置和姿态要求,明确了末端采样器姿态补偿方法,提出了着陆姿态对表层采样影响的分析算法。仿真结果表明,该算法能有效分析着陆姿态对表层采样的影响,可为表层采样装置适应性设计提供支持。     

改进的电热除冰系统的仿真方法

建立了电热除冰系统矩形微段的二维简化物理模型，采用焓法模型建立相变导热问题的微分控制方程，用控制容积法对该模型的控制方程及其边界、初始条件进行离散，使用块修正技术对原有的离散方程组的求解方法进行了改进，得到各个时刻的温度分布及冰的融解情况。计算结果与国外文献结果吻合，验证了改进的算法和程序的正确性。并计算分析了时间步长的选择、网格的划分对计算结果的影响。     

烧结双多孔介质中沸腾换热的实验研究

对由铜粉烧结而成的三种双多孔介质结构进行了沸腾换热的实验。为了便于比较，同时对两种单多孔介质进行了沸腾换热实验。结果发现：当双多孔介质的微孔径和单多孔介质的孔径相同时，双多孔介质的换热系数和临界热流密度比单多孔介质高得多；对于同样微孔径的双多孔介质，存在最佳的粗孔径，其换热系数和临界热流密度最大；当逆静水压头减小的时候，换热系数和临界热流密度增加。     

多跑道内水平障碍物限制面边界确定方法

对机场多跑道系统的障碍物限制面——内水平面的边界确定方法进行了系统研究。通过将N条（N≥3）复杂构形跑道简化为2N个点集，根据国际民航组织内水平面障碍物限制面形成原理并利用多边形凹凸性几何特征，给出了内水平面边界的确定方法和计算步骤。     

国外新型热作模具钢及其热处理工艺

主要叙述了H13、QRO80M、QRO90SUPREME等新型热作模具钢的性能、使用特点及其热处理工艺技术方法。     

用大面积源检定核应急机载/车载伽玛能谱仪

人工核素大面积源标准是核工业航测遥感中心等单位经过十余年研究建立的新型计量保障标准,使用该标准,可对监测核应急伽玛辐射环境的机载/车载伽玛能谱仪进行检定.使用大面积源标准检定,可以有效地弥补因机载/车载伽玛能谱仪系统的角响应影响因素复杂而难于模拟计算的缺陷,为监测核应急伽玛辐射环境的机载/车载伽玛能谱仪提供了量值传递的保障.本文介绍了大面积源检定的原理和技术方法.