抑制温州房价上涨的政策建议——基于同苏州的比较

为抑制或稳定房价，国家出台了一系列宏观调控和行政管制政策，但房价依然居高不下，且个别地区的房价上涨势头异常强劲。温州与苏州两地经济总量具有一定可比性，房价却存在较大差异。土地供给方面，苏州大大多于温州；政府行为方面，苏州拥有更多的政策优势；购房需求方面，温州购房主体的力量比苏州更为强大；房地产金融环境方面，温州比苏州更易于提供按揭。抑制温州房价的迅猛上涨势头，除了遵循国家各项政策，还应该考虑地区差异。采取适宜的措施。如增加建设用地和住房供给以满足需求；摆正政府位置，规范政府行为，防止政府沦为房地产行业的既得利益者；保护正常购房需求，抑制投机需求；加强金融监管，规范房产信贷，切断投机者的资金来源。     

关于多元函数的二阶混合偏导数不相等的例子

指明考察多元函数的二阶混合偏导数不相等问题的理论依据，给出两类二元函数的二阶混合偏导数不相等的例子，并说明在此基础上取得新例子的方法。     

中国股市涨跌停板制度的实证分析及政策建议

通过对深圳股市2001年上半年前后两个时期A、B两种股票涨跌停现象的统计分析,发现两种股票的涨跌停频率较高, B股的涨跌频率更是远高与A,并且涨停明显地多于跌停.因此本文认为我国股市当前10%的价格限制比例偏小,同时应该对涨跌设置不同的限制幅度.     

销售政策与产品定价模型

本文分析探讨了销售政策与定价模型的关系，建立了考虑销售政策的扩展价格模型。尽管不同企业在制定价格政策上存在不同的做法，但本文关于建立价格政策与定价模型数量关系的方法具有普遍指导意义。     

Bifurcation in a 3-DOF Airfoil with Cubic Structural Nonlinearity

Limit cycle oscillations (LCOs) as well as nonlinear aeroelastic analysis of a 3-DOF aeroelastic airfoil motion with cubic restoring moments in the pitch degree of freedom are investigated.Aeroelastic equations of an airfoil with control surface in an incompressible potential flow are presented in the time domain.The harmonic balance (HB) method is utilized to calculate the LCO frequency and amplitude for the airfoil.Also the semi-analytical method has revealed the presence of stable and unstable limit cycles,along with stability reversal in the neighborhood of a Hopf bifurcation.The system response is determined by numerically integrating the governing equations using a standard Runge-Kutta algorithm and the obtained results are compared with the HB method.Also the results by the third order HB (HB3) method for control surface are consistent with the other numerical solution.Finally,by combining the numerical and the HB methods,types of bifurcation,be it supercritical,subcritical,or divergent flutter area are identified.     

反高斯分布环境因子估计

研究了反高斯分布环境因子估计。根据指数分布和对数正态分布环境因子的定义及数据折算与综合的方便,给出了反高斯分布环境因子的定义。据此定义,用经典方法和贝叶斯方法推证了环境因子的上、下限,并给出了一些近似式以便于计算。实例计算结果较令人满意。     

产权、寻租与保护价收购粮食探讨

在目前国家按保护价敞开收购农民粮食的情况下,将确定粮食质量这一产权配置给征收人员导致了租金的存在,而对交纳主体这一产权未加约束使寻租活动最终产生.因此解决这一问题的途径包括将确定粮食质量的产权配置给农民和确保农民成为惟一的交纳主体等.     

选择工程材料的一种定量化方法

本文简述了选择工程材料时应考虑的部分因素,论述了材料在某些载荷作用下其机械性能与成本之间的关系,从而给出了可以定量化比较和计算的选择工程材料的方法。     

Formability enhancement in hot spinning of titanium alloy thin-walled tube via prediction and control of ductile fracture

The damage and fracture in hot spinning of titanium alloy is a very complex process under the combined effects of microstructure evolution and stress state. In this study, their dependences on processing parameters were investigated by an integrated FE model considering microstructure and damage evolution, and revealing the effects of microstructure and stress states on damage evolution. The results show that the inner surface of workpiece with the largest voids volume fraction is the place with...     

Prediction of forming limit curve （FLC） for AI-Li alloy 2198-T3 sheet using different yield functions

The Forming Limit Curve （FLC） of the third generation aluminum-lithium （Al-Li） alloy 2198-T3 is measured by conducting a hemispherical dome test with specimens of different widths. The theoretical prediction of the FLC of 2198-T3 is based on the M-K theory utilizing respectively the von Mises, Hill＇48, Hosford and Barlat 89 yield functions, and the different predicted curves due to different yield functions are compared with the experimentally measured FLC of 2198-T3. The results show that though there are differences among the four predicted curves, yet they all agree well with the experimentally measured curve. In the area near the planar strain state, the predicted curves and experimentally measured curve are very close. The predicted curve based on the Hosford yield function is more accurate under the tension-compression strain states described in the left part of the FLC, while the accuracy is better for the predicted curve based on Hill＇48 yield function under the tension-tension strain states shown in the right part.