固体发动机切割分离泄压过程分析

本文依据质点动力学和一维可压缩流体动力学原理，利用无限大容器的出流结果，在适当的简化假设基础上，建立了固体发动机切割分离泄压过程的数学模型，并对泄压过程和分离后的状态变化进行预测．通过比对分析试验容器的理论和试验结果，证明本文方法的误差在15％以内。     

跨音速非定常测压实验技术

本文描述了在 FL-1风洞中,对 NACA0012翼型进行的非定常跨音速压力测量实验。实验目的是研究在跨音速风洞中二元机翼非定常压力测量的实验技术问题,包括实验装置的设计、数据采集和处理等。并初步研究了 M 数、攻角、振幅和频率等参数对非定常压力分布的影响。     

亚、跨、超音速风洞控制系统

利用ＰＣ总线工业控制计算机及有关功能组件，组成ＨＧ－４亚、跨、超音速风洞控制系统，实现超音速总压Ｐ０及亚、跨音速马赫数Ｍ自动调节，进一步提高吹风过程自动化。     

低速风洞数据采集与处理系统

对低速风洞数据采集与处理系统作了综合介绍，该系统以先进的电子扫描压力测量仪器为主体，高性能微机为系统控制处理机，配制高精度模拟量采集部件和前置通道放大器，灵活实用的软件，系统具有同时进行测力测压试验的能力。该系统提供压力联机校正，模拟量通道标准信号校正功能，整个系统的设计包括了许多先进的仪器概念如：电子扫描测压，模拟量信号调理等。该系统具有采集速度快，高稳定性，软硬件功能齐全，实时数据处理，快速提     

NACA0012翼型跨音速测压实验研究

本文为NACA0012翼型在NH-1风洞进行跨音速二维测压实验的研究报告。文中将本风洞的实验结果与国外大风洞的相应实验结果及国内某些理论计算结果作了比较。比较表明曲线规律一致,数据符合较好,说明按现行实验方法得到的本风洞跨音速测压数据是可靠的。本文还对参考点M数、洞壁干扰修正及激波位置等问题作了简要的分析。     

Influence of deformation zone length on bending radius of SS304 tubes with small diameters manufactured via free bending-based active motion

In three and six-axis free-bending equipment, the deformation zone length(A) is a fixed mechanical structure parameter modified when the relevant structure is redesigned and manufactured. In this study, a six degree of freedom(6-DOF) parallel mechanism was used as the control mechanism of the bending die, and a new method of changing the deformation zone length(A)was proposed. Firstly, an idealized geometric model of free bending-based active motion was established. Then, the influence of the de...     

尾迹对低压涡轮端区非定常流动影响的数值研究

为提高尾迹对涡轮端区二次流影响的认识,利用尾迹降低端区损失,采用了数值模拟的方法对T106A非定常工况下的叶栅流动进行模拟,辅以实验进行校核。以上游尾迹对端区附面层的抬升作用和上游尾迹对叶栅通道前部涡系结构的破坏作用为切入点,分析尾迹对端区二次流非定常发展过程的影响。研究发现尾迹中心离开叶栅通道时,尾迹对叶栅端区二次流起抑制作用;当尾迹尾部离开叶栅通道时,尾迹卷起的轮毂附面层激励了端区二次流,使二次流更加活跃。     

各级差异化多级刷式密封级间压降均衡性数值与实验研究

分析多级刷式密封级间压降分配特性理论,提出新型各级差异化多级刷式密封结构,基于流固耦合方法建立新型多级刷式密封三维实体计算模型,设计搭建新型多级刷式密封泄漏流动特性实验装置,数值与实验研究在不同工况条件下,结构参数对新型结构多级刷式密封级间压降均衡性和泄漏特性的影响规律。研究结果表明：传统结构多级刷式密封各级级间压降占比均衡性标准差为8.41,新型结构各级级间压降占比均衡性标准差最大为4.69,最小为2.07。相较传统各级相同结构,增大下游级有效流通面积的新型各级差异化多级刷式密封可有效改善级间压降的不均衡性。提高后挡板保护高度使得新型结构各级级间压降占比均衡性标准差最小,各级级间压降占比较接近,可明显改善新型结构多级刷式密封级间压降均衡性。减少刷丝束厚度和增大刷丝束与转子面间隙使新型结构多级刷式密封的泄漏量增大明显。     

Plastic wrinkling model and characteristics of shear enforced Ti-alloy thin-walled tubes under combination die constraints and differential temperature fields

Plastic wrinkling predictions and shear enforced wrinkling characteristics of Ti-alloy thin-walled tubes under combination die constraints have become key problems urgently in need of solutions in order to improve forming quality in their shear bending processes under differential temperature fields. To address this, a wrinkling wave function was developed by considering their shear bend deformation characteristics. Based on this wave function and the thin shell theory, an energy prediction model for this type of wrinkling was established. This model enables considera-tion of the effects of shear deformation zone ranges, material parameters, loading modes, and fric-tion coefficients between tube and dies on the minimum wrinkling energy. Tube wrinkling sensitive zones (WSZs) can be revealed by combining this wrinkling prediction model with a thermal-mechanical coupled finite element model for simulating these bending processes. The reliability of this wrinkling prediction model was verified, and an investigation into the tube wrinkling char-acteristics was carried out based on the experimental conditions. This found that the WSZs are located on either a single side or both sides of the maximum shear stress zone. When the friction coefficients between the tube and the various dies coincide, the WSZs are located on both sides. The larger the value of the tube inner corner radius and/or the smaller the value of the outer corner radius, the smaller the wrinkling probability. With an increase in the value of the moving die dis-placement, the wrinkling probability increases at first, and then decreases.     

加强筋对客机复合材料球面框结构屈曲性能影响

本文针对客机复合材料球面框,通过有限元计算,对球面框上的加强筋对结构屈曲性能的影响展开深入研究.球面框球皮采用碳纤维层合板,加强筋为填充PMI泡沫的帽形加强筋.建立有加强筋和无加强筋两种结构方案,并建立有限元模型进行静力和屈曲分析计算.结果表明客机复合材料球面框的加强筋对球面框结构的屈曲性能和稳定性有一定的改善作用,但对球面框结构的静强度改善作用不大,增加加强筋后球面框的应变和位移变化较小.球面框结构设计时出于成本和制造工艺考虑可以不采用加强筋.