飞行器鼻锥凹腔-发散组合冷却数值模拟

尖锐鼻锥冷却方案是可复用式航天飞行器研究领域一个十分重要的课题。传统发散冷却虽然可以有效降低鼻锥结构温度,但是由于驻点外极高的热流、压力,会出现驻点冷却效果差的问题。迎风凹腔结构是一种针对鼻锥驻点区域的减阻防热方案,尖锐唇口的分流作用可以使附近压力、热流降低。因此,提出一种新型冷却结构——凹腔-发散组合冷却,利用迎风凹腔结构对驻点的强化冷却解决发散冷却中驻点难以冷却的问题。以楔形鼻锥为物理模型,对发散冷却、迎风凹腔结构和凹腔-发散冷却3种冷却结构进行数值模拟,并和无冷却的纯鼻锥结构进行对比。结果表明,与传统发散冷却相比,使用凹腔-发散组合冷却可以使结构温度峰值下降16.8%;与没有冷却的纯鼻锥模型相比,鼻锥头部圆弧段表面平均温度降幅可达64%,证实了这种新型冷却结构的可行性和高效性。     

基于寿命法的压力敏感涂料静/动态特性实验

压力敏感涂料测量技术在内外流表面压力测量方面具有独特的技术优势。涂料光谱特性及"传感器"特性的研究对于分析喷涂固化中环境差异等不可控因素的影响程度、检验拟用涂料配方特定试验的适用性具有十分重要的意义。为此,以一种在研的磷光压力敏感涂料为对象,基于自主研发的静态校准系统对发光寿命随压力与温度的变化规律进行了实验研究,通过对测量结果的拟合分析发现所用涂料的温度适用范围在30~60℃之间,且可进行温度敏感度修正;基于自主研发的高频动态压力光学校准系统对涂料在不同压力脉动频率下的涂料发光寿命峰峰值规律进行了实验研究,通过分析研究确定所用涂料基于发光寿命的截止频率上限为0.94 kHz。实验研究进一步验证了涂料特性静动态校准组合方法的可行性与有效性,为压力敏感涂料配方的研发及其应用拓展提供了重要的技术支撑。     

非均匀来流下等压力梯度曲面压缩系统的试验研究

根据激波和膨胀波理论,设计了Ma=5.3等压力梯度曲面压缩系统。在Ma=3.85和Ma=5.3的小高超风洞完成均匀来流试验,并利用风洞壁面自然发展的附面层进行非均匀来流等压力梯度曲面压缩系统性能试验。试验发现:均匀来流下,试验模型壁面压力均按照等压力梯度规律分布,但来流马赫数Ma=5.3时出口流场均匀性较差;非均匀来流下,大量的附面层吸入不仅影响壁面压力不再呈等压力梯度分布,而且对出口流场均匀性影响也极大。      

The effect of the space flight environment on mucin production in the mouse uterine tube

Numerous studies have indicated that the microgravity environment of space has harmful effects on several tissues throughout the body. Although this phenomenon is well documented, research in this area is still in its relative infancy. This study investigates the effects of space flight on mucin production of the uterine tubes of mice. This study examined the epithelium of the uterine tubes from female mice that were flown on the space shuttle Endeavour for 13 days in August, 2007 and their concomitant controls. The tissue was qualitatively analyzed for the type of mucin produced, i.e., acidic, neutral, acidic/neutral mixture. Further, the tissue was quantitatively analyzed for the amounts of mucins produced by measuring the thickness of the mucin layer for each region of the uterine tube: isthmus, ampulla, and infundibulum. One way ANOVA tests were used to compare mucin thickness between all three sets of animals. Results indicate similar but not identical results between the three regions of the uterine tube. The Baseline tissue had the thickest mucin layer regardless of treatment group. In the ampulla the mucin layer was the thinnest in the Flight tissue, followed by the Ground Control, with the Baseline being the thickest. Analysis of the mucin layer of the infundibulum of the three treatment groups indicated no difference in its thickness between the three regions of the uterine tube. These results indicate a trend toward thinning of the mucin layer of the uterine tube in space flight, but also indicate an influence by the housing environment.     

Heliotropic dust rings for Earth climate engineering

This paper examines the concept of a Sun-pointing elliptical Earth ring comprised of dust grains to offset global warming. A new family of non-Keplerian periodic orbits, under the effects of solar radiation pressure and the Earth’s J₂ oblateness perturbation, is used to increase the lifetime of the passive cloud of particles and, thus, increase the efficiency of this geoengineering strategy. An analytical model is used to predict the orbit evolution of the dust ring due to solar-radiation pressure and the J₂ effect. The attenuation of the solar radiation can then be calculated from the ring model. In comparison to circular orbits, eccentric orbits yield a more stable environment for small grain sizes and therefore achieve higher efficiencies when the orbit decay of the material is considered. Moreover, the novel orbital dynamics experienced by high area-to-mass ratio objects, influenced by solar radiation pressure and the J₂ effect, ensure the ring will maintain a permanent heliotropic shape, with dust spending the largest portion of time on the Sun facing side of the orbit. It is envisaged that small dust grains can be released from a circular generator orbit with an initial impulse to enter an eccentric orbit with Sun-facing apogee. Finally, a lowest estimate of 1 × 10¹² kg of material is computed as the total mass required to offset the effects of global warming.     

同轴波导与开放式同轴谐振腔的比较研究

文章介绍了同轴波导内场分布的计算公式以及开放式同轴谐振腔的场分布、谐振频率和品质因数的计算公式。通过对同轴波导和开放式同轴谐振腔的比较研究发现,开放式同轴谐振腔实质上就是纵向剖面为缓变截面的同轴波导。     

全流量补燃循环发动机系统参数模型与设计(Ⅱ)参数设计

在全流量补燃循环发动机系统动力平衡模型的基础上,研究了氢发汗冷却流量、燃烧室压力和燃烧室混合比对发动机系统参数的影响规律.研究结果表明:在发动机推力和喷管扩张比保持恒定时,①随着氢发汗冷却流量的增加,燃料泵扬程大幅度增大,氧化剂泵扬程小幅度减小;②当燃烧室压力在20MPa之前,泵的扬程增加与燃烧室压力的增加近似成线性;...     

Topological Studies of Three-dimensional Flows in a High Pressure Compressor Stator Blade Row without and with Boundary Layer Aspiration

This paper presents a numerical study of the flow topologies of three-dimensional (3D) flows in a high pressure compressor stator blade row without and with boundary layer aspiration on the hub wall. The stator blade is representative of the first stage operating under transonic inlet conditions and the blade design encourages development of highly complex 3D flows. The blade has a small tip clearance. The computational fluid dynamics (CFD) studies show progressive increase of hub corner stall with the increase in incidence. Aspiration is implemented on the hub wall via a slot in the corner between the hub wall and the suction surface. The CFD studies show aspiration to be sensitive to the suction flow rate; lower rate leads to very complex flow structures and increased level of losses whereas higher rate renders aspiration effective for control of hub corner separation. The flow topologies are studied by trace of skin friction lines on the walls. The nature of flow can be explained by the topological rules of closed separation. Furthermore, a deeper analysis is done for a particular case with advanced criterion to test the non-degeneracy of critical points in the flow field.     

内乘波式进气道与典型侧压式进气道的性能对比

采用流线追踪技术,基于一种有利于均匀性的基本流场,按内乘波式进气道设计方法生成了一个来流马赫数6.0且进出口形状均为矩形的内乘波式进气道。其设计马赫数、迎风面形状等因素均参照某典型侧压式进气道选取,以便与之对比。CFD计算结果给出了设计状态下该内乘波式进气道与某典型侧压式进气道的流量系数、总压恢复、动能效率等主要性能指标,发现该内乘波式进气道的各项性能参数均略优于侧压式进气道。在非设计马赫数、攻角、侧滑等非设计状态下类似的性能对比研究表明,该内乘波式进气道不仅在设计状态下可捕获98%的来流,而且在各非设计状态下也可捕获91%以上的来流,流量捕获性能优势明显。以上结果证实:实现三维压缩与激波贴口的内乘波式进气道是一种高性能的定几何进气道方案。     

旋流静态混合器内脉动壁压符号时间序列复杂度分析

为了研究旋流静态混合器内瞬态壁压非线性符号化特性,利用高速动态数据采集系统对直径为0.1m、长径比为2的旋流静态混合器内湍流脉动壁压进行测量。基于瞬态壁压序列的有限统计复杂性对3种符号化转换方法进行了评估,并优化了数据采样长度和小波分解尺度。分析发现动态法保留静态混合流动有效信息能力优于其他两种方法。运用动态法和db2小波相结合对1～15尺度下的压力波动信号进行多尺度符号化复杂度分析。实验研究表明：随着轴向位置的增加,系统的稳定性增强,相对复杂度降低。7.8125Hz以上信号随着流体微团脉动频率的降低其相对复杂度呈双曲线衰减,而0～7.8125Hz信号相对复杂度随信号频率的降低呈线性衰减,表明静态混合是一种具有宏观大尺度稳定性和局部小尺度不稳定的多尺度结构的流体动力学系统。