几种常用格式和湍流模型在高速流动中的适用性研究

针对高超声速飞行器中存在的强激波、激波/边界层干扰、分离、湍流等复杂流动现象,对比分析了当前计算流体力学中的主要空间离散格式及湍流模型,发现不同格式对强激波的分辨率基本相同,Roe和LDE(low diffusion E-CUSP(convective upwind split pressure))格式对摩擦因数和传热系数的模拟优于其他格式;S-A(Spalart-Allmaras)一方程湍流模型计算的摩擦因数比k-ωSST(shear stress transport)两方程湍流模型高10%左右,而后者预测的分离区约为前者的2倍,且分离点靠前.     

弹射筒内筒组件钢球收压及检测工艺

本文对航空火箭弹射座椅弹射筒内筒钢球收压技术要求、难点进行了工艺分析;介绍了钢球收压工艺技术难点、检测方法及注意事项等,在工艺技术研究及设计过程中取得了一定的技术积累,具有良好的借鉴、推广应用意义。     

椭圆形切扇修形对波瓣混合器掺混性能影响

在保证面积不变的情况下,选取不同的长轴、短轴,对波瓣混合器进行椭圆形切扇修形,研究切口深度与宽度对波瓣混合器掺混性能的影响规律。使用商用 CFD 软件对流场进行数值模拟。结果显示,对波瓣侧壁进行切扇处理会加强流向涡的强度,切扇越深,流向涡强度越大;切扇波瓣流向涡的耗散速率要大于基准波瓣混合器的流向涡耗散速率,预示着更为高效的掺混;引射系数与切口深度成正比,而总压恢复系数与切口深度成反比。考察了两种衡量热混合效率的模型并对其信度进行了比较,发现在 x =0.4 m 之前切扇可以提高热混合效率,而在 x =0.4 m 之后,基准波瓣混合器热混合效率要大于切扇波瓣混合器。     

利用格壁安装角对栅格舵展开折叠压心控制的工程方法研究探索

随着技术的发展，在工程设计中，对于巡航迎角下栅格舵导弹的展开与折叠的压心变化控制对于控制系统来说尤为重要。本文创新性的首次提出利用栅格舵的内壁单元的偏转，即相对于水平面的夹角来实现在设计点下的压心控制。由于设计过程需要多次迭代，本文利用计算在所关注的设计点处对展开折叠压心进行了验证，创造性的利用了等效代替的方法提出了一种新型的计算折叠状态压心的快速工程方法。     

Solar cycle and latitude dependence of high-beta suprathermal plasma conditions in interplanetary space between 1.3 and 5.4 AU

The analysis of energetic particles and magnetic field measurements from the Ulysses spacecraft has shown that in a series of events, the energy density contained in the suprathermal tail particle distribution is comparable to or larger than that of the magnetic field, creating conditions of high-beta plasma. In this work we analyze periods of high-beta suprathermal plasma occurrences (β_ep > 1) in interplanetary space, using the ratio (β_ep) of the energetic particle (20 keV to ∼5 MeV) and magnetic field energy densities from measurements covering the entire Ulysses mission lifetime (1990–2009) in order to reveal new or to reconfirm some recently defined interesting characteristics. The main key-results of the work are summarized as follows: (i) we verify that high-beta events are detected within well identified regions corresponding mainly to the vicinity of shock surfaces and magnetic structures, and associated with energetic particle intensity enhancements due to (a) reacceleration at shock-fronts and (b) unusually large magnetic field depressions. (ii) We define three considerable features for the high-beta events, concentrated on the next points: (a) there is an appreciable solar-activity influence on the high-beta events, during the maximum and middle solar-cycle phase, (b) the annual peak magnitude and the number of occurrences of high events are well correlated with the sunspot number, (c) the high-beta suprathermal plasma events present a spatial distribution in heliographic latitudes (HL) up to ∼±80°, and a specific important concentration on the low (−25° ? HL < −6°, 6° < HL ? 25°) and median (−45° ? HL < −25°, 25° < HL ? 45°) latitudes. We also reconfirm by a statistical analysis the results of Marhavilas and Sarris (2011), that the high-beta suprathermal plasma (β_ep > 1) events are characterized by a very large parameter β_ep (up to 1732.5), a great total duration (406 days) and a large percentage of the Ulysses-mission lifetime (which is equal to 6.34% of the total duration with usable measurements, and 11.3% of the duration in presence of suprathermal particles events).     

油液含气量对液压系统的影响

飞机液压系统油液的含气量，空气进入飞机液压系统的形式以及飞机液压系统油液中的空气对飞机液压系统的影响，慢慢被国内外从事液压系统研制人们所重视，在国内，一些大专院校和液压技术研究机构正着手研究液压系统中这些问题。一个好的液压系统，它的抗故障能力是较强的，但是，设计中忽视某些问题，则容易产生这样、那样的故障，甚至使液压系统造成灾难性后果，应引起我们重视。     

横越两圆柱体的传热特性

用数值方法求解绕过两圆柱的对流传热问题。贝克列数在０－５０的范围内，了四种不同间距时的传热情况。从中发现两圆柱的传热特性相互有影响，这种影响随意距变化很敏感，两圆柱中任一个的平均谢尔特数总是小于单个圆柱的。并给出了简化计算的条件与公式。     

槽对超声速混压式进气道性能及附面层的影响

为了提高定几何超 声速混压式轴对称进气道的性能，应用在进气道不同位置开槽的方法 ，研究了在各级锥体上、锥体的折角处开槽时锥体上的附面层变化；研究了多工况下开槽对进气道的总压恢复系数、流量系数、冲压比和起动性能产生的影响。结果表明开槽将改变超声速进气道头锥上的波系分布，使槽后附面层厚度增加。折角处开槽槽后附面层厚度比原型进气道增加16.7%，锥体上开槽比原型进气道增加33.3%。开槽使高马赫数下的总压恢复系数有所增加，其增加量随来流马赫数的变化而变化。在马赫数为4.0的设计状态下，折角处开槽可使进气道的总压恢复系数提高1.8%，锥体上开槽可以提高4.3%。之外，锥体折角处开槽对流量系数影响不大，还可以改善进气道的起动性能，降低起动马赫数。     

超声光栅测声速

介绍了超声光栅测声速的实验，澄清了实验中的一些问题，并讨论了包括声压大小对实验结果的影响以及时间的累积对实时光栅产生的影响等问题，用数值分析的方式给予解答。     

Use of the ASTER satellite images for evaluation of structural changes in the Popocatépetl volcano related to microseismicity

Mexico is one of the most volcanically active regions in North America. Volcanic activity in central Mexico is associated with the subduction of the Cocos and Rivera plates beneath the North American plate. Periods of enhanced microseismic activity, associated with the volcanic activity of the Popocatépetl volcano are compared with periods, during which the microseismic activity was low. We detected systematical changes in the number of lineaments, associated with the microseismic activity due to lineament analysis of a temporal sequence of high resolution satellite images of the Popocatépetl volcano, provided by the ASTER/VNIR instrument. The Lineament Extraction and Stripes Statistic Analysis (LESSA) software package was used for the lineament extraction. In the future it would allow develop a methodology for detection of possible elevation of pressure in volcano edifice.