不同环境因素对引压管腔动态特性影响

为了探索引压管腔在动态压力校准和使用中不同环境因素对动态特性的影响,推导了管腔传压模型和谐振频率关系式,确立了影响管腔动态特性的参数,包括静态压力、温度、气体介质等。采用引压管腔专用实验装置进行了不同环境参数状态的实验验证,结果表明:静态压力仅会影响管腔在谐振频率附近的输出,随着静态压力的增大而非线性增大,对动态特性并无明显改变;温度会改变管腔的谐振频率和动态特性,随着温度的升高,谐振频率增大但输出幅值随之减小;气体介质的不同会彻底改变管腔动态特性,主要取决于介质的声速。该研究为引压管腔在使用环境下数据的评价和数据修正上提供了一定参考依据。     

Advances in critical technologies for hypersonic and high-enthalpy wind tunnel

Hypersonic and high-enthalpy wind tunnels and their measurement techniques are the cornerstone of the hypersonic flight era that is a dream for human beings to fly faster, higher and further. The great progress has been achieved during the recent years and their critical technologies are still in an urgent need for further development. There are at least four kinds of hypersonic and high-enthalpy wind tunnels that are widely applied over the world and can be classified according to their operation modes. These wind tunnels are named as air-directly-heated hypersonic wind tunnel, light-gas-heated shock tunnel, free-piston-driven shock tunnel and detonation-driven shock tunnel, respectively. The critical technologies for developing the wind tunnels are introduced in this paper, and their merits and weakness are discussed based on wind tunnel performance evaluation. Measurement techniques especially developed for high-enthalpy flows are a part of the hypersonic wind tunnel technology because the flow is a chemically reacting gas motion and its diagnosis needs specially designed instruments. Three kinds of the measurement techniques considered to be of primary importance are introduced here, including the heat flux sensor, the aerodynamic balance, and optical diagnosis techniques. The techniques are developed usually for conventional wind tunnels, but further improved for hypersonic and high-enthalpy tunnels. The hypersonic ground test facilities have provided us with most of valuable experimental data on high-enthalpy flows and will play a more important role in hypersonic research area in the future. Therefore, several prospects for developing hypersonic and high-enthalpy wind tunnels are presented from our point of view.     

基于气压高度辅助的机载自主完好性监测算法

卫星接收机自主完好性监测是指根据用户接收机的多余观测值监测用户定位结果的完好性,其目的是在导航过程中检测出发生故障的卫星,并保障导航定位精度。针对卫星接收机自主完好性监测算法可用性不足的问题,结合机载实际导航系统配置,提出了一种基于气压高度表辅助的机载自主完好性监测算法。综合利用卫星导航系统及气压高度表观测信息,建立联合系统的观测模型,推导了基于多解分离的完好性监测及保护级别计算方法。仿真结果表明,相比于传统的接收机自主完好性监测算法,该算法在可见星为5颗时仍能识别故障卫星。该算法具有更好的故障检测能力及可用性,能有效提高卫星导航系统的完好性监测性能,从而保证卫星导航系统的精度和可靠性。     

A swept fin-induced flow field with different height mounting gaps

In order to apply the air fin successfully and ensure the maneuverability of hypersonic vehicle, a key problem to be studied urgently is the heat flux brought by the fin mounting gap. The appearance of mounting gap and fin shaft can induce many complex flow structures which need more attentions to be investigated. Under Ma 6, Nano-tracer-based Planar Laser Scattering (NPLS) and Temperature Sensitive Paints (TSP) were applied to visualize and measure transient flow structures and heat flux distribution of a swept fin-induced flow field with different height mounting gaps. Complementarily, Reynolds-averaged N-S equations were solved with k-ω SST turbulent model. The heat flux distribution results of numerical simulation and TSP observed the change of high heat flux region with different mounting gap, both in position and magnitude. The streamlines based on Computational Fluid Dynamics (CFD) and flow visualization results obtained by NPLS revealed the cause of high heat flux region. The high heat flux region in this flow field is mainly related to the reattachment of vortex and flow stagnation. The increase of gap height can lead to stronger gap overflow and shaft-induced horseshoe vortex, which are source of the high heat flux around the fin. The case with the highest mounting gap (4 mm) en-counters the most severe aerodynamic heating, both on the surface of fin and plate. Thus, under the premise of ensuring the flexibility of the fin, the gap should be set as small as possible.     

超声速变马赫数风洞流场参数线性变化验证

旋转喷管型面使超声速变马赫数风洞在单次运行过程中可连续调节实验区的马赫数,便于研究飞行器的机动过程、进气道起动过程中的气动问题。在控制喷管型面旋转过程中,流场参数能否线性变化是衡量超声速变马赫数风洞性能的一个重要指标。分析变马赫数风洞实验区流场参数的线性变化规律,利用弹簧光顺的动网格技术建立数值仿真模型,验证喷管位于马赫数3.041~3.215 范围所对应的位置时,实验区流场参数是否满足线性变化规律。结果表明：通过对喷管型面旋转的控制实现了风洞实验区流场参数的线性变化,动态计算结果与预期实验区流场参数线性变化规律吻合良好;在不同加速度的流场参数线性变化过程中,各时刻实验区的平均参数与预期参数之间的偏差均小于0.13%。     

结冰翼型表面明冰的压力分布和应力计算

在不同来流速度和攻角下,比较分析了冰型外部压力分布的变化规律,计算分析了外部压力分布对表面冰型的力学特性影响规律,研究了冰型和蒙皮界面间最大剪切应力的变化规律,并结合剪切强度随界面温度变化的实验曲线,分析了最大剪切应力对冰层脱落的贡献.计算结果表明:最大剪切应力是剪切强度的5.48%,因此气动力对冰层的脱落贡献不大;当开启热除冰装置后,由于蒙皮表面温度的不断上升,冰型和蒙皮界面间剪切强度的下降,当表面温度为-2℃时,最大剪切应力超过剪切强度的10%,此位置可能率先产生破裂,从而加速冰层的脱落.      

基于模型的转子系统不平衡量的估计

采用基于模型的方法对转子系统的不平衡量进行估计,首先记录初始状态下的振动信号,然后根据实时测得的不平衡响应信号,得出差值振动信号,联立转子系统的动力学方程,得出不平衡等效载荷,根据等效载荷,得出不平衡的位置、相位及大小.采用模态扩展技术实现由有限几个点的振动响应获取所需点上的响应.由于噪声的影响,提出了基于高斯小波的降噪方法.仿真与实验结果表明,这一方法能够比较准确地估计出转子系统的不平衡量.      

2.4米跨声速风洞大展弦比飞机测力试验技术研究

针对大展弦比飞机的气动布局特点,在2.4米跨声速风洞中开展了大展弦比飞机测力试验技术研究。该项研究建立了大升阻比高精度天平设计技术和模型支撑系统设计平台,研制了专用大升阻比高精度测力天平和模型支撑系统。在国内高速风洞中建立了大型跨声速风洞模型设计新准则。研究结果表明:所提出和制定的方案是科学合理的,为我国大飞机研制提供了可靠的技术支撑。     

大上翘机身后体设计方法

 在具有大上翘角的运输机机身后体设计中,目前国际上多以上翘角、长细比、收缩比和扁平度4种主要几何参数作为机身后体的设计原则。以国际上3种典型运输机为研究原型,构造了3种大上翘后体机身模型,采用计算流体力学(CFD)方法,研究了3种机身的阻力与绕流特性,综合分析了上翘角、长细比、收缩比和扁平度4种几何参数对机身阻力和绕流特性的影响及其描述大上翘后体形状对阻力特性影响的适用性。研究结果表明：仅占总阻力15％～20％的压差阻力决定机身的阻力特性,机身减阻应从减小压差阻力入手;后体截面形状是影响压差阻力的关键因素,而扁平度不能准确完整地描述后体截面形状对压差阻力的影响,采用近圆度及其沿机身轴线的变化描述后体截面形状的影响更为合理。提出了应以上翘角、长细比、收缩比、近圆度和近圆度沿机身轴线的变化率5种参数为主作为大上翘机身后体设计原则。     

连续离子层吸附反应法制备超薄功能膜及应用

阐述了液相法中制备超薄功能膜的新方法——连续离子层吸附反应法(Successive Ionic Layer Adsorption and Reaction,SILAR)。探究了它的薄膜生长机理、工艺参数影响以及应用现状,指出了尚需深入研究的问题。