Comparative analysis of four different single-frequency PPP models on positioning performance and atmosphere delay retrieval

Single-frequency precise point positioning (SF-PPP) has attracted increasing attention due to its high precision and cost effectiveness. With various strategies to handle the dominant error, i.e., ionosphere delay, the ionosphere-float (IF), ionosphere-free-half (IFH), ionosphere-corrected (IC), and ionosphere-weighted (IW) SF-PPP models are certain to possess different characteristics and performance levels. This study is dedicated to assessing and comparing the four models from model characteristics, positioning performance, and atmosphere delay retrieval. The model comparison shows that IC and IW models are full-rank while IF and IFH models have a rank deficiency of size one that will result in biased estimations, which means the better solvability of IC and IW models. The experiments are carried out based on the 7-day Global Positioning System (GPS) observations collected at 57 global Multi-GNSS Experiment (MGEX) stations and Global Ionosphere Map (GIM) products. The results indicate that the IW model can accelerate SF-PPP convergence and achieve higher positioning accuracy compared to the other three SF-PPP models, especially in kinematic mode. With convergence criteria of 0.25 m in horizontal and 0.5 m in vertical, the east/north/up convergence times of IW model are 0.5/15.0/25.0 min and 0.5/16.0/36.5 min for static and kinematic modes, respectively. The IW model is able to achieve an instantaneous positioning accuracy of 0.28/0.35/0.75 m. In addition, a real kinematic test also demonstrates the best positioning solutions of IW model. Regarding troposphere delay retrieval, the IF, IFH, and IW models obtain a comparable daily accuracy of 3.0 cm on average, while the IC model achieves the worst accuracy of 8.0 cm. For precise ionosphere delay estimation, IW model only needs an average initialization time of 34.3 min, but a longer initialization time of 51.6 min is required for IF model. The daily precision of ionosphere delay estimation for IW model can reach up to 10.8 cm. At the present accuracy of GIM products, it is suggested that the IW model should be adopted for SF-PPP first due to its superior performance in positioning and atmosphere delay retrieval.     

三轴无刷转台交流伺服放大器

研究了一种用于驱动无刷转台中永磁同步电机的全数字交流伺服放大器。针对转台系统对其伺服电机运行的要求,采用了独特的方式对其电流环和速度环进行考核。实验中结合全数字伺服放大器的特点,采用了一种参数实时补偿的方法,对调节器参数动态地进行修正,有效地保证了电机输出力矩性能的要求和矢量控制策略的实现。此外,文中还对高精度码盘在伺服系统中的应用展开了深入的研究,并设计了一套简单实用的分频器以便进行相关的运算。理论分析和实验结果验证了转台伺服放大器的良好性能以及控制策略的有效性。     

基于全球网和区域网SLR数据的低轨卫星定轨精度分析

卫星激光测距(SLR)是目前低轨卫星常用的定轨手段之一.文章以贾森-1(Jason-1)和"环境卫星"(EN VISAT)实测数据为例,讨论了不同弧段长度(1天、3天和7天)的全球网SLR数据对低轨卫星定轨精度的影响,分析了基于美国网、欧洲网和亚洲网等区域网SLR数据的低轨卫星精密定轨精度.检验定轨精度的参考轨道来自美...     

Precise coseismic displacements from the GPS variometric approach using different precise products: Application to the 2008 MW 7.9 Wenchuan earthquake

The Global Positioning System (GPS) variometric approach has emerged as an attractive alternative to traditional well-developed positioning techniques including relative positioning and precise point positioning. Previous studies have demonstrated the capability of the variometric approach to retrieve coseismic displacements at centimeter-level precision, in a real-time manner using only readily available broadcast ephemeris. This study presents the first results comparing the performance of the variometric approach by using a variety of precise satellite orbit and clock products. Totally six kinds of products are included in our evaluation, namely the broadcast, IGS (International GNSS Service) ultra-rapid (predicted), ultra-rapid (observed), rapid, final (30-s clock) and CODE (Center for Orbit Determination in Europe) final (5-s clock) products. Static and dynamic experiments are conducted using 1-Hz GPS data covering a relatively large area in China during the 2008 Wenchuan M_W 7.9 earthquake. After removing the linear trend, the displacements using broadcast, ultra-rapid (predicted), ultra-rapid (observed) and rapid products reach nearly equivalent precisions at centimeter level. By using final and CODE final products, the precision of displacements can be significantly improved from 1.9–2.0 cm to 0.4–0.7 cm horizontally, and from 6.0–6.2 cm to 1.0–1.7 cm vertically for the dynamic experiments. The displacements using the CODE final products achieve the best precision, improved by more than 40% compared to those using the IGS final products. With the availability of IGS high-rate real-time precise products, this approach is promising to capture coseismic displacements more precisely in real time, which is crucial for earthquake and tsunami early warning.     

全球精密单点定位性能评估

随着中国北斗三号卫星导航系统（BDS-3）全面建成与开通，北斗卫星导航系统已步入了新发展阶段，基于BDS-3实现全方位、多层次、高精度应用已成为地学研究中一项基本任务。利用全球最新均匀分布的10个MGEX跟踪站，分别从24 h内接收到的卫星数、卫星位置精度因子（PDOP）、卫星数据解算完整率和双频非组合精密单点定位（PPP）静态/动态定位精度等方面系统深入地评估了BDS-3在全球范围内的可用性。结果表明，测站对卫星跟踪能力与配备的接收机类型和区域位置有强相关性，单BDS-3卫星在全球范围内具有较强的连续定位能力，当使用SEPT POLARX5和JAVAD TRE_3接收机的情况下，数据解算完整率可达100%。此外，水平方向和高程方向定位精度分别优于2 cm和3 cm，并且在联合使用BDS-2和BDS-3定位的条件下，可使得静态定位精度在东、北和高程方向进一步提升37.6%,25.3%和38.9%。     

基于LabVIEW的快速往复朗缪尔探针诊断系统

使用朗缪尔探针诊断法获得电推力器喷口位置等离子体的状态参数时,探针在喷口位置停留时间过长造成探针被等离子体流烧坏.以LabVIEW为开发平台研制了一种精确定位的快速往复运动诊断系统.该系统能实现探针迅速推进到喷口位置,停留极短时间保证探针能正常完成电流电压数据采集,最后快速的退出到起始位置,避免探针烧坏.与传统的朗缪尔探针诊断系统测量霍尔推力器羽流区等离子体状态相比,该系统自动化程度高,探针采集喷口位置的数据更能反映等离子体的真实状态.     

对一种月球与火星探测多程微波测量链路定轨定位的数值模拟初步分析

轨道器精密定轨与着陆器的精确定位在深空探测任务中具有非常重要的科学意义。对一种月球与火星探测多程微波测量链路的定轨定位能力进行了初步仿真分析,推导了这种多程微波测量链路的测量模型,分析了该模型的优势。模拟仿真分析结果表明,此测量跟踪模式的数据具有提升轨道精度的潜在能力,并且同时求得着陆器的位置。定量分析表明,在考虑坐标系转换误差,重力场误差,行星历表误差以及星上转发误差的情况下,模拟1 mm/s的噪声,对于月球探测器来说,轨道器的定轨精度可达几米,着陆器的定位精度有望达到分米量级;对于火星探测器来说,轨道器的定轨精度可达到数10 m,着陆器的定位精度可达到几米。     

陆海激光卫星高程测量的思考

为满足新形势下陆海激光卫星高程测量的需求,分析了高精度高程控制点数据获取、森林生物量估算、浅海及海岛礁地形测绘、"三极"区域高程变化监测等方面的需求,提出了发展多波束激光卫星测高的初步设想,并就高精度激光指向测量技术、距离门宽度动态适应调整技术等关键技术问题进行了探讨。     

基于相推法的空间光载射频链路绝对延时测量

空间光载射频链路利用空间光链路实现射频信号的传输.由于采用大气信道传输光载射频信号,链路绝对延时受到大气湍流和温度等因素影响,产生延时抖动.本文采用相推法对1 km空间光载射频链路的绝对延时进行了高精度测量,测量结果与理论模型吻合,测量精度优于0.1 ps.该测量方法采用电光调制和射频鉴相实现了链路绝对延时测量,与光载...     

适用于高精度惯性平台系统的精密加矩电路设计与实现

精密加矩电路通过给陀螺力矩器施加电流,驱动惯性平台系统相对惯性空间进行转动,其精度精度直接关系到惯性平台系统自标定与自对准精度能否实现。本文针对高精度惯性平台系统的需求,采用大电流粗加矩和小电流精加矩两种加矩电路的方式,兼顾了平台系统快速转位以及精确电流控制的要求。采用数字控制的二元调宽电路实现电流的精确控制。试验结果表明,精密加矩电路可以满足高精度平台系统自标定和自瞄准的要求。