机载用电设备的供电适应性试验系列标准制定与实施

机载用电设备的供电适应性试验是对各类机载用电设备在各种供电状态下的性能以及用电设备工作对供电系统影响的验证，是保证用电设备（尤其是大功率电子设备）与飞机供电系统相兼容的重要措施和方法。本文阐明了我国机载用电设备的供电适应性试验系列标准的组成和相互关系，着重对供电适应性试验方法标准的定位、框架、结构要素的确定和主要内容进行了分析，并提出实施供电适应性方法标准的建议。     

相变光盘多层膜系结构的最佳光匹配研究

论述了相变光盘最佳膜系结构的设计。采用导纳矩阵法计算膜系的能量反射率，用量优化计算方法编程计算，提出了第二大极值解作为在工艺上可行的实用光盘的膜系结构，并按这种膜系结构制作样品，其擦写循环数达１００万次上。     

气固两相透平叶片冲蚀特性的气动试验研究

在自行研制风洞中先后对应用较广的MCrAlY叶片涂层和2Cr12Mo-5叶片合金、钢丸表面强化试件在不同气流速度、颗粒冲角、颗粒性状、颗粒粒度的条件下进行了气动冲蚀试验。试验结果表明,无论是涂层还是合金,冲蚀率均随冲蚀颗粒的累积质量呈线性变化;由对比可知,其它条件相同的情况下,涂层在广泛的冲角范围内较合金的冲蚀率更小,表面的"烧结"特征,能减小叶片的冲蚀率;表面呈多棱的石英砂颗粒对试件的冲蚀程度强于带突圆球状的催化剂颗粒;在该试验范围内,相同材质的颗粒,粒度愈大,对试件的冲蚀率愈大;钢丸表面强化工艺兼有防冲蚀的能力。试验结果将为优化叶片选材、简化叶片维修技术、降低叶片维修成本提供有益的参考。     

Mathematical description of the NaK model for MASTER-2005

The release of NaK droplets has been modeled for the new version of the European Meteoroid and Space Debris Terrestrial Environment Reference model MASTER-2005. Previously published versions of the model have been revised. The parameters of the model are introduced and discussed. NaK droplets consist of eutectic sodium–potassium alloy and have been released during RORSAT reactor core ejections. They contributed to the space debris environment in the centimeter and millimeter size regime. Sixteen nuclear powered RORSATs launched between 1980 and 1988 activated a reactor core ejection system in Sufficiently High Orbits (SHO), mostly between 900 and 950 km altitude. The core ejection caused an opening of the primary coolant circuit. The liquid coolant has been released into space during these core ejections. The outflow is considered as a discrete event for each of the sixteen core ejections in total. The NaK coolant has been forming droplets up to a diameter of 5.5 cm. NaK releases are restricted to a very narrow region near 65° inclination. This paper gives the parameters of the NaK release model as it is implemented in MASTER-2005. The quantitative values of all model parameters including characteristic diameter and uniformity parameter are presented. The ratio of the characteristic droplet size to the orifice diameter is discussed. It is estimated that altogether 128 kg of NaK-78 (8 kg per RORSAT) was released on orbit. Simulation runs show that there are still 45,000 droplets with a total mass of 97 kg in orbit at the reference epoch 1 May 2005, whereas the smallest droplet has a diameter of 5 mm. Results of orbit propagation simulation runs are presented in terms of spatial density.     

国际空间太阳能电站的技术进展

综述了当前国际空间太阳能电站技术的研究进展与发展趋势。重点介绍了空间太阳能电站系统方案新构思“太阳塔”和“太阳盘”的特点；介绍了空间太阳能电站的主要相关技术———无线电能传输技术、太阳能转换技术和空间运输技术等的发展趋势；最后简要介绍了月球电站的进展情况。     

Aerodynamic optimization design for high pressure turbines based on the adjoint approach

A first study on the continuous adjoint formulation for aerodynamic optimization design of high pressure turbines based on S2surface governed by the Euler equations with source terms is presented.The objective function is defined as an integral function along the boundaries,and the adjoint equations and the boundary conditions are derived by introducing the adjoint variable vectors.The gradient expression of the objective function then includes only the terms related to physical shape variations.The numerical solution of the adjoint equation is conducted by a finitedifference method with the Jameson spatial scheme employing the first and the third order dissipative fluxes.A gradient-based aerodynamic optimization system is established by integrating the blade stagger angles,the stacking lines and the passage perturbation parameterization with the quasi-Newton method of Broyden–Fletcher–Goldfarb–Shanno(BFGS).The application of the continuous adjoint method is validated through a single stage high pressure turbine optimization case.The adiabatic efficiency increases from 0.8875 to 0.8931,whilst the mass flow rate and the pressure ratio remain almost unchanged.The optimization design is shown to reduce the passage vortex loss as well as the mixing loss due to the cooling air injection.     

Numerical study on flow fields and aerodynamics of tilt rotor aircraft in conversion mode based on embedded grid and actuator model

A method combining rotor actuator disk model and embedded grid technique is presented in this paper, aimed at predicting the flow fields and aerodynamic characteristics of tilt rotor aircraft in conversion mode more efficiently and effectively. In this method, rotor's influence is considered in terms of the momentum it impacts to the fluid around it; transformation matrixes among different coordinate systems are deduced to extend actuator method's utility to conversion mode flow fields' calculation. Meanwhile, an embedded grid system is designed, in which grids generated around fuselage and actuator disk are regarded as background grid and minor grid respectively, and a new method is presented for ‘donor searching' and ‘hole cutting' during grid assembling. Based on the above methods, flow fields of tilt rotor aircraft in conversion mode are simulated, with threedimensional Navier–Stokes equations discretized by a second-order upwind finite-volume scheme and an implicit lower–upper symmetric Gauss–Seidel(LU-SGS) time-stepping scheme. Numerical results demonstrate that the proposed CFD method is very effective in simulating the conversion mode flow fields of tilt rotor aircraft.     

混合三元系超大集

对于三类混合三元系超大集Ti-OLGD（v）（i=1,2,3）,T1-OLGD（v）和T2-OLGD（v）的存在谱已经完全解决了,而对于T3-OLGD（v）的存在性问题,所知结果很少。本文利用代数和组合设计相结合的方法,主要利用有限域的相关知识,对于T3-OLGD（q-1）（q为素数幂）,给出了一种新的构造方法,从而得到了一系列的结果。     

地球同步卫星BSR硅太阳电池阵输出功率衰减规律分析

长期受粒子辐照、紫外辐照等因素的影响,地球同步卫星的太阳电池阵输出功率会出现较为明显的衰减。这里选取某地球同步卫星使用的背表面反射(BSR)硅太阳电池阵为研究对象,采用光强因子和温度因子修正太阳电池阵的输出功率,使用局部加权回归散点平滑法(LOWESS)分析了其在设计寿命期间的输出功率衰减规律;同时基于LOWESS建立了预测模型,用于硅太阳电池阵超寿运行期间的功率预测。实测数据表明:本文构建的预测模型可以满足超寿地球同步卫星在轨管理使用需求。     

热膜测试技术在涡轮叶栅边界层测量中的应用

为了更加精确地测量附面层流动状态,并验证表面热膜测试技术的可靠性,利用表面热膜测量了低雷诺数定常来流条件下高负荷涡轮叶栅通道内叶片吸力面附面层的流动状态,并与表面静压实验测得结果进行对比。结果表明,利用表面热膜测得的准壁面剪切力以及相关的统计参数能够准确捕捉到附面层分离泡和转捩的位置,对于高负荷低压涡轮叶型附面层流动测量是可靠有效的。