快速功能点法在装备软件规模估计中的应用

通过对几种基于案例的估计方法和基于算数模型的估计方法进行分析和比较,结合嵌入式装备软件自身特点,在某装备软件的规模估计中,采用快速功能点计数方法进行了有益实践,并对该方法的推广提出建议.     

Safety assessment of approximate segregated parallel operation on closely spaced parallel runways

With the continuous growth of air traffic flow, some airports in China or other countries begin to construct Closely Spaced Parallel Runways (CSPR) to meet the capacity requirement of civil aviation. In this paper, the simulation and calculation method of flight trajectory is developed, as well as the collision risk calculation method and wake vortex encounter risk calculation method. New methods for departure and go-around procedures are proposed to achieve approximate segregated parallel operation in an attempt to obtain approximately the same results on closely spaced parallel runways as on widely spaced parallel runways. By comparing with the independent parallel departure and segregated parallel operation in ICAO Doc. 9643, it is found that the lateral separation between aircraft in this proposal is not less than the separations in the other two cases. Based on the simulation calculation of flight trajectories under different conditions, the probabilities of collision conflict and encountering wake vortex are lower than those in current operation plan. The proposed plan has no special requirements in pilot operation, control command procedures, airport facilities, or meteorological observation and prediction, so it is convenient to promote and implement at the airports with closely spaced parallel runways.     

Contribution analysis of QZSS to single-frequency PPP of GPS/BDS/GLONASS/Galileo

The Quasi-Zenith Satellite System (QZSS) established by the Japan Aerospace Exploration Agency mainly serves the Asia-Pacific region and its surrounding areas. Currently, four in-orbit satellites provide services. Most users of GNSS in the mass market use single-frequency (SF) receivers owing to the low cost. Therefore, it is meaningful to analyze and evaluate the contribution of the QZSS to SF precise point positioning (PPP) of GPS/BDS/GLONASS/Galileo systems with the emergence of GNSS and QZSS. This study compares the performances of three SF PPP models, namely the GRoup and PHase Ionospheric Correction (GRAPHIC) model, GRAPHIC with code observation model, and an ionosphere-constrained model, and evaluated the contribution of the QZSS to the SF PPP of GPS/BDS/GLONASS/Galileo systems. Moreover, the influence of code bias on the SF PPP of the BDS system is also analyzed. A two-week dataset (DOY 013–026, 2019) from 10 stations of the MGEX network is selected for validation, and the results show that: (1) For cut-off elevation angles of 15, 20, and 25°, the convergence times for the static SF PPP of GLONASS + QZSS are reduced by 4.3, 30.8, and 12.7%, respectively, and the positioning accuracy is similar compared with that of the GLONASS system. Compared with the BDS single system, the convergence times for the static SF PPP of BDS + QZSS under 15 and 25° are reduced by 37.6 and 39.2%, the horizontal positioning accuracies are improved by 18.6 and 14.1%, and the vertical components are improved by 13.9 and 21.4%, respectively. At cut-off elevation angles of 15, 20, and 25°, the positioning accuracy and precision of GPS/BDS/GLONASS/Galileo + QZSS is similar to that of GPS/BDS/GLONASS/Galileo. And the convergence times are reduced by 7.4 and 4.3% at cut-off elevation angles of 20 and 25°, respectively. In imitating dynamic PPP, the QZSS significantly improves the positioning accuracy of BDS and GLONASS. However, QZSS has little effect on the GPS-only, Galileo-only and GPS/BDS/GLONASS/Galileo. (2) The code bias of BDS IGSO and MEO cannot be ignored in SF PPP. In static SF PPP, taking the frequency band of B1I whose multipath combination is the largest among the frequency bands as an example, the vertical component has a systematic bias of approximately 0.4–1.0 m. After correcting the code bias, the positioning error in the vertical component is lower than 0.2 m, and the positioning accuracy in the horizontal component are improved accordingly. (3) The SF PPP model with ionosphere constraints has a better convergence speed, while the positioning accuracy of the three models is nearly equal. Therefore the GRAPHIC model can be used to get good positioning accuracy in the absence of external ionosphere products, but its convergence speed is slower.     

The update of BDS-2 TGD and its impact on positioning

Timing group delay (TGD) is an important parameter that affects the positioning performance of global navigation satellite systems (GNSS). The BeiDou navigation satellite system (BDS) broadcasts TGD corrections from B3I frequency to B1I and B2I frequencies, namely TGD₁ and TGD₂. On July 21, 2017, BDS updated TGD values with a maximum change of more than 4 ns. In this contribution, we explain the motivation for the BDS TGD update, which is due to the systematic bias between narrowly correlated and widely correlated pseudo-ranges in BDS monitoring receivers. To investigate the impact of the updated TGD, BDS signal-in-space range error (SISRE) and user positioning performance regarding single point positioning (SPP) and precise point positioning (PPP) are analyzed. Results show that after the update of TGD, the difference between the new TGD and multi-GNSS experiment (MGEX) differential code bias (DCB) decreases from 1.38 ns to 0.29 ns on TGD₁ and from 0.40 ns to 0.25 ns on TGD₂. With the contribution of more accurate TGD, the systematic bias of BDS radial SISRE no longer exists, and the overall BDS SISRE also reduces from 1.33 m to 0.87 m on B1I/B2I frequency, from 1.05 m to 0.89 m on B1I frequency, from 0.92 m to 0.91 m on B2I frequency, respectively, which proves the similar precision of BDS TGD and MGEX DCB. One week of statistical results from 28 globally distributed MGEX stations shows that the SPP performance improves on non-B3I frequencies after the TGD update, with a maximum improvement of more than 22% for the B1I/B2I or B1I/B3I combination. The new TGD mainly reduces SPP positioning bias in the East component. The updated TGD also slightly improves the PPP convergence performance for the B1I/B3I combination, but mostly contributes to a more accurate estimation of the receiver clock and ambiguities.     

单一飞行员驾驶模式技术

飞机驾驶机组由20世纪50年代的5乘员驾驶模式减少到了目前的双乘员，然而为了降低航空公司运营成本以及减少双乘员认知不同、操作不一致所带来的安全性隐患，开展了单一飞行员驾驶（SPO）模式研究，SPO是新一代商用飞机发展方向核心技术之一。单一飞行员驾驶模式是描述面向商用飞机单一驾驶员、驾驶舱智能自动系统以及地面航空公司操作员协同实现的飞行驾驶模式。本文首先对单一飞行员驾驶模式系统组成及其系统架构进行了描述，并对比分析了单一飞行员驾驶模式下飞行员、空管系统、航空公司三方协同过程与现有模式的差异点；然后，针对商用飞机主要飞行过程，建立了单一飞行员驾驶模式下各飞行过程组织架构；最后，搭建了面向SPO的远程操控演示验证系统，经过飞行员操作评价，基本可以获取到机上操作所具备的驾驶感受，同时对于飞行计划更改、紧急情况处理等方面更为便利。通过上述内容研究，为中国商用飞机开展单一飞行员驾驶发展奠定了一定的技术基础。     

Libration point orbit rendezvous using PWPF modulated terminal sliding mode control

The near-range rendezvous problem of two libration point orbit spacecraft in the Earth–Moon system is studied using the terminal sliding mode control which enables a time-fixed process with the flight time prescribed a priori. The underlying dynamics are the full nonlinear equations of motion for a complete Solar System model. For practical purposes, two means of pulse-width pulse-frequency (PWPF) modulation are employed to realize the theoretical continuous control with a series of thrust pulses. Extensive simulations with major errors taken into account show that the sliding mode controller can successfully guide the chaser to a given staging node with the final position and velocity errors, on average, lower than 20 m and 1 mm/s, respectively. Compared with the glideslope guidance previously studied, the proposed approach outperforms the former by saving approximately 50–60% of total delta-v.     

车载两轴式岸防导弹发射平台总体指向精度分析

文章以车载两轴式岸防导弹发射平台为研究对象,确定了发射平台的总体精度架构,针对发射装置随动系统、机械传动系统、发射装置结构和载车平台等精度支路,对总体指向精度的影响进行深度剖析,提出了“同类方差+异类求和”的误差分类方法和统计运算原则,运用 ADAMS和 ANSYS仿真软件,对发射平台的总体指向精度预估方法开展了系统的研究,较客观地反映了发射平台总体指向精度的真实情况,对相关研究具有一定的借鉴意义。     

Coupling Magneto-Electro-Elastic node-based smoothed radial point interpolation method for free vibration and transient analysis of Functionally Graded Magneto-Electro-Elastic structures

A Coupling Magneto-Electro-Elastic (MEE) Node-based Smoothed Radial Point Interpolation Method (CM-NS-RPIM) was proposed to solve the free vibration and transient responses of Functionally Graded Magneto-Electro-Elastic (FGMEE) structures. By introducing the modified Newmark method, the displacement, electrical potential and magnetic potential of the structures under transient mechanical loading were obtained. Based on G space theory and the weakened weak (W²) formulation, the equations of the multi-physics coupling problems were derived. Using triangular background elements, the free vibration and transient responses of three numerical examples were studied. Results proved that CM-NS-RPIM performed better than the standard FEM by reducing the overly-stiff of structures. Moreover, CM-NS-RPIM could reduce the number of nodes while guaranteeing the accuracy. Besides, triangular elements could be generated automatically even for complex geometries. Therefore, the effectiveness and validity of CM-NS-RPIM were demonstrated, which were valuable for the design of intelligence devices, such as energy harvesters and sensors.     

地月系低能转移轨道设计

分析了不同转移轨道间的性能指标,以黄道面与白道面交线作为庞加莱截面实现不同系统轨道的拼接,利用其中耗能最小的日地系稳定流形和地月系的不稳定流形设计了一条低能耗转移轨道.最后对不同轨 道进行了能量分析和对比,优化了国内提出的低能探月轨道.仿真结果表明,文中方法比直接通过霍曼转移节约21.1%的能量,对探月工程的轨道设计具...