航空发动机喷嘴结焦积碳的性质

针对航空燃料燃烧时会在航空发动机喷嘴处产生大量结焦积碳,影响航空飞行器的飞行安全和使用寿命这一问题,研究了某型航空发动机喷嘴零部件上结焦积碳的生成情况.采用扫描电镜(SEM,Scanning Electron Microscope)、透射电镜(TEM,Transmission Electron Microscopy)、能谱仪(EDS,Energy Disperse Spectroscopy)以及X射线衍射技术(XRD,X-ray Diffraction)对结焦积碳的微观形态和性质进行了分析.结果表明:喷嘴零部件上生成的结焦积碳主要有两种形态:一种是丝状焦,另一种是颗粒状焦.其中,丝状焦只出现在零部件表面较光滑的位置,包括短纤维丝状焦和不定形丝状焦,是由金属催化作用所形成的;其形成与喷嘴零部件的结构、材质及表面粗糙度有关.颗粒状焦则主要集中在活塞表面,包括颗粒团聚状焦和颗粒分散状焦,是由催化作用与燃料热裂解共同作用所形成的.      

Index allocation for a reusable LOX/CH4 rocket engine

Reusable rocket engines are the core components of reusable launch vehicles, and have thus become a major focus of aerospace engineering research in recent years. In practice, subsystem design is based on the overall index allocation of an engine; therefore, a multidisciplinary optimization approach is necessary. In this study, design of a reusable methane/liquid oxygen (LOX/CH4) rocket engine with a gas generator cycle was investigated using multidisciplinary optimization. Two parameters were chosen as design variables: pressure and fuel mix ratio of the main combustion chamber. Optimization objectives were specific impulse, structural mass, and life cycle cost of the reusable rocket engine, and constraints were assigned to each discipline according to rocket design requirements. Then, an optimization model was developed, and optimal design parameters were acquired for the LOX/CH4 rocket engine. The proposed method is effective for designing the index allocation of reusable rocket engines and takes into account the multidisciplinary nature of complex systems.     

Complex Flow for Wing-in-ground Effect Craft with Power Augmented Ram Engine in Cruise

Power augmented ram (PAR) engine is a popular equipment to reduce the requirement of power for takeoff and improve aerodynamic performance. To provide detailed insight into the aerodynamic characteristics of wing-in-ground effect (WIG) craft with PAR engine, numerical simulations are carried out on WIG craft models in cruise. Simplified engine models are applied to the simulations. Two cruise modes for PAR engine are considered. The aerodynamic characteristics of the WIG craft and other features are studied. Comparisons with WIG craft model without PAR show that shutoff of PAR engine results in an increase in drag and less change in lift. Accordingly for the work of PAR engine, the air flow blown from the engine accelerates the flow around the upper surface and a high-speed attached flow near the trailing edge is recorded. With the schemed PAR flow, more suction force is realized and the flow features over the wing vary noticeably. It is also shown that the Coanda effect, provided with an attached flow, introduces an appropriate and practical flow mode for WIG craft with PAR engine in cruise. The results refresh our understanding on aerodynamic characteristics of WIG craft.     

有轴向通流的双旋转轴间流动换热的数值模拟

采用混合长度模型,用共轭数值计算的方法研究了具有轴向通流且内轴加热情况下的双旋转轴间的换热,得到了内轴、双轴间隙内的温度场,内轴外壁面的温度分布情况,内轴外壁面对流换热系数的分布情况,并与实验结果进行了比较,结果表明:经过修正的混合长度模型对具有轴向通流的双旋转轴间换热情况的计算是可行的.      

发动机机匣、支板系统结构动力分析

发展了在环向只能处理连续变量的常规有限条法。分析在环向由若干个离散分布的支板和支架支承的发动机机匣回转壳。各离散支板和支架回转壳刚度的贡献, 是通过支板和壳体连接处位移相等的变换, 将各支板的刚度阵叠加到回转壳的总体刚度阵上实现的。同时证明了位移在环向的Fourier级数展开式中, 只有n=0, n=1项对轴系的支承刚度有贡献。支板及支板附近的壳体的局部应力, 是由局部子结构空间板壳有限元分析得到, 该子结构的边界位移由整体的回转壳分析给出。算例表明, 本文提出的方法能有效地计算轴系的支承动刚度和壳体的局部应力。      

多状态气路分析法诊断发动机故障的分析

对多状态气路分析法诊断发动机故障的可行性进行了分析。估值平均误差J是判断诊断精度的有效判据。通过数值试验给出了J值的建议值。就状态数的选择和监视参数的选择对诊断效果的影响进行了分析。通过分析指出适当增加和正确选择监视参数可减少状态数, 增加诊断精度。增加高压压气机后压力和高低压涡轮间的压力两个测量参数是实用的改善诊断精度的方法。      

基于部件跟踪滤波器的解析余度技术

研究一种以发动机部件跟踪滤波器(CTF)为基础的解析余度技术, 它将CTF与故障检测、隔离和适应逻辑进行了有效的综合, 以改进发动机数控系统的可靠性。仿真表明, 本文所设计的解析余度技术, 在传感器无故障时, 机载模型能正确跟踪发动机的变化。当传感器发生故障时, 在不损坏机载模型的情况下, 又能及时、有效地进行硬、软故障的检测、隔离与适应。      

转盘-静盘腔内层流流动的相似分析及其N-S方程数值解

对转盘-静盘系统进行的相似分析表明:转盘-静盘腔内层流流场主要受入口流量数、旋转雷诺数、盘腔间隙系数、密封间隙系数和入口孔径比等5个参数影响。采用SIMPLE法对转盘-静盘系统层流流场进行了计算。结果表明:盘腔间隙的大小和密封冠对旋转核的存在具有决定性影响, 当入口流量数减小或旋转雷诺数增大时, 旋转核趋向于生成且转速增大;证明了影响径向速度的主要是惯性力, 而影响周向速度的是惯性力和粘性力共同作用。通过数值计算还得到了防止外燃气“入侵”的最小入口流量数。      

Aircraft engine fault detection based on grouped convolutional denoising autoencoders

Many existing aircraft engine fault detection methods are highly dependent on performance deviation data that are provided by the original equipment manufacturer. To improve the independent engine fault detection ability, Aircraft Communications Addressing and Reporting System (ACARS) data can be used. However, owing to the characteristics of high dimension, complex correlations between parameters, and large noise content, it is difficult for existing methods to detect faults effectively by using ACARS data. To solve this problem, a novel engine fault detection method based on original ACARS data is proposed. First, inspired by computer vision methods, all variables were divided into separated groups according to their correlations. Then, an improved convolutional denoising autoencoder was used to extract the features of each group. Finally, all of the extracted features were fused to form feature vectors. Thereby, fault samples could be identified based on these feature vectors. Experiments were conducted to validate the effectiveness and efficiency of our method and other competing methods by considering real ACARS data as the data source. The results reveal the good performance of our method with regard to comprehensive fault detection and robustness. Additionally, the computational and time costs of our method are shown to be relatively low.     

叶片振动可靠性评估方法研究

提出一种用于发动机叶片振动可靠性评估方法,该方法基于叶片共振转速图（Ｃａｍｐｂｅｌ）,引入概率故障树ＰＦＴＡ（ＰｒｏｂａｂｉｌｉｔｙＦａｕｌｔＴｒｅｅＡｎａｌｙｓｉｓ）概念,改善了传统评估方法。其目的是为发展叶片共振识别和可靠性评估的有效方法。在Ｃａｍｐｂｅｌ图上,叶片共振系统定义由工作转速点和附近的多个共振点组成。利用ＰＦＴＡ分析该系统能获得更多的叶片振动信息。该方法发展了常规的叶片振动可靠性设计方法,为叶片设计和叶片振动疲劳排故中改善叶片振动特性提供有益的工程评估方法。