端齿连接转子轴向松弛力（压紧力）计算

 将端齿连接转子的零部件简化归并为４类结构，利用弹性力学、壳体理论、有限元素法及多变量函数插值技术等手段，导出各类结构轴向柔度系数的工程计算表达式，并给出离心力、气动力、热载荷及机动载荷等在各端齿接触面处引起的轴向松弛力或压紧力的计算公式。还介绍了根据本文提出的方法及公式开发的计算机程序，并给出了其应用实例     

铜与铜镶嵌非晶体焊料点焊的研究

研究了铜与铜镶嵌非晶体焊料ＱＪＹ－５Ａ、ＱＪＹ－５Ｂ点焊,以及调整点焊温度场来降低焊接区铜的熔点,提高焊接区电能利用率的措施;叙述了铜与铜镶嵌ＱＪＹ－５Ａ、ＱＪＹ－５Ｂ焊料点焊焊核形成过程及特点。     

板宽对胶焊接头应力分布影响的数值分析

采用三维弹塑性有限元方法,研究了酚醛树脂和丙烯酸树脂两种胶粘剂的胶焊接头中,板宽对应力分布的影响。结果表明,酚醛树脂胶粘剂胶焊接头中,搭接区边缘应力值高于焊点边缘应力值,导致接头从搭接区边缘起裂,板宽增大时,焊点边缘处和搭接区边缘的峰应力都减小,对于提高胶焊接头的强度有利,但不会改变接头的断裂形式;丙烯酸树脂胶粘剂的胶焊接头,焊点边缘应力远高于搭接区边缘应力,因此接头从焊点边缘起裂,板宽增大时,焊点边缘应力基本不变。因此增加板宽对提高接头强度无明显作用,接头断裂形式也不发生改变。     

应力集中对GH2036合金低周疲劳—蠕变性能的影响

在对光滑试件和缺口试件进行高温疲劳－蠕变实验的基础上,分析了应力集中对ＧＨ２０３６合金低周疲劳－蠕变特性的影响。结果表明缺口试件的循环寿命远远低于光滑试件的循环寿命。将应变范围划分方法和改进的Ｎｅｕｂｅｒ原理相结合,得到了缺口部位高温低周疲劳－蠕变寿命估测的方法。用该方法估算ＧＨ２０３６合金的寿命并与实测寿命结果进行比较,证明此方法的预测效果良好。     

排气引射系统主喷管选型试验研究

对４种主喷管组成的排气引射系统的引射系数和总压损失、各主喷管出口与混合管进口之间的最佳间距、混合气流在混合管内的静压恢复及混合气流在混合管出口处的总压分布等进行了测量和对比。试验结果对排气引射系统主喷管选型设计有重要的参考价值。     

用变截面试样测量损伤变量 D(E)

 给出了一种用变截面试样测量Ｄ（Ｅ）的方法,推导出用该方法测材料弹性模量Ｅ及Ｄ（Ｅ）的理论公式,分析了有关因素对测量结果的影响,并用ＬＹ１２－ＣＺ铝合金试样对本文所提出的方法进行了试验验证。结果表明该方法是可行的,且具有实用性,和便于同一损伤过程的多角度对比研究的优点。     

带副翼三维机翼绕流的N-S方程解

提出了一种求解带副翼偏转三维机翼绕流的N-S方程计算方法。采用对接分区网格与分区求解算法的结合,有效地求解绕此外形的复杂流动。提出了一种满足通量守恒的内边界耦合条件。数值方法中选用vanLeer分裂格式离散无粘通量项,并构造了一种Limiter函数以保证TVD性质,采用中心差分格式来离散粘性通量项。数值算例表明该方法是求解带操纵面偏转的机翼绕流的有效方法。     

带副翼三维机翼绕流的Euler方程解

提出了一种求解带副翼偏转三维机翼绕的Ｅｕｌｅｒ方程计算方法。采用对接分区网格民分区求解算法的结合,有铲地求解绕引外形的复杂流动,提出了一种满足通量守恒的内边界耦吉选用ＶａｎＬｅｅｒ分裂格式离散玩粘通量项,并构造了一种Ｌｉｍｉｔｅｒ函数以保证ＴＶＤ性质。数值算例表明本方法是求解带操纵纵面偏转的机翼绕流的有效方法。     

Semi-analytic Solution of Steady Temperature Fields During Thin Plate Welding

Usually, it is very difficult to find out an analytical solution to thermal conduction problems during high temperature welding. Therefore, as an important numerical approach, the method of lines （MOLs） is introduced to solve the temperature field characterized by high gradients. The basic idea of the method is to semi-discretize the governing equation of the problem into a system of ordinary differential equations （ODEs） defined on discrete lines by means of the finite difference method, by which the thermal boundary condition with high gradients are directly embodied in formulation. Thus the temperature field can be obtained by solving the ODEs. As a numerical example, the variation of an axisymmetrical temperature field along the plate thickness can be obtained.     

Global Response of Martian Plasma Environment to an Interplanetary Structure: From Ena and Plasma Observations at Mars

As a part of the global plasma environment study of Mars and its response to the solar wind, we have analyzed a peculiar case of the subsolar energetic neutral atom (ENA) jet observed on June 7, 2004 by the Neutral Particle Detector (NPD) on board the Mars Express satellite. The “subsolar ENA jet” is generated by the interaction between the solar wind and the Martian exosphere, and is one of the most intense sources of ENA flux observed in the vicinity of Mars. On June 7, 2004 (orbit 485 of Mars Express), the NPD observed a very intense subsolar ENA jet, which then abruptly decreased within ∼10 sec followed by quasi-periodic (∼1 min) flux variations. Simultaneously, the plasma sensors detected a solar wind structure, which was most likely an interplanetary shock surface. The abrupt decrease of the ENA flux and the quasi-periodic flux variations can be understood in the framework of the global response of the Martian plasma obstacle to the interplanetary shock. The generation region of the subsolar ENA jet was pushed towards the planet by the interplanetary shock; and therefore, Mars Express went out of the ENA jet region. Associated global vibrations of the Martian plasma obstacle may have been the cause of the quasi-periodic flux variations of the ENA flux at the spacecraft location.