应用广义阶梯函数解圆板的塑性极限分析问题

在文献「１」的基础上，进一步应用广义阶梯函数对承受边缘弯矩，局部均布荷载和线性分布荷载的简支圆板进行塑性极限分析，给出了简支圆板在Ｔｒｅｓｃａ屈服条件下，边缘弯矩，局部均布荷载和线性分布荷载所满足的关系式。     

复合材料加筋板后屈曲强度工程分析方法探讨

复合材料加筋板的屈曲性态研究(包括初始屈曲、后屈曲分析以至二次屈曲和最终破坏),其目的在于预测壁板在初始屈曲后的刚度降以及对加筋结构整体抗屈曲能力的影响,给出最终的破坏载荷。 目前,国内外有关加筋板屈曲的研究工作还仅限于以线弹性分析为基础的简化计算模     

CWZ-GD型光电传感器的原理、特性和应用

简要介绍了CWZ—GD型光电传感器的检测原理并对其输入—输出特性作了详细分析,介绍了其在薄板轧制自动生产线上用于钢带边界位置检测的情况及推广应用前景。     

具有复杂边界条件的各向异性矩形板稳态热传导解析

应用复级数方法给出的各向异性稳态热传导解析解，首次解析分析两邻边承受热流一边绝热一边对流换热的各向异性矩形板温度场。讨论了各向异性、铺设角对温度场分布的影响。数值结果表明，强各向异性板的最高温度梯度高于弱各向异性板相应值。对于各种铺设角而言，铺设角为０°的各向异性板最高温度及温度梯度均为最低。     

正交各向异性复合材料中裂纹问题的边界元法分析

在基本解的基础上，研究了正交各异性复合材料平面问题边界元法的有关基本问题，包括Ｃ矩阵，Ｇｉｊ矩阵，Ｈｉｊ矩阵和域内应力表达式等，并建立了常值边界单元和线性边界单元的计算公式（适用于各类边值问题）。用建立的公式对正交各向异性板含中心裂纹问题和含圆孔的无限大正交各向异性板问题进行了分析与计算，取得了较好的计算效果。     

周边简支组合折板结构在复合荷载和热荷载作用下的非线性分析

本文借助阶跃函数，符号函数和斜坐标系，建立了组合折板的壳面方程，然后应用扁壳非线性理论和Ｎａｖｉｅｒ法，导出了组合折板非线性分析的计算公式。     

一个大挠度柱面弯曲板条的求解

本文应用付宝连的大挠度弯曲直梁的功的互等定理,求解一个柱面弯曲板条的挠曲面方程。     

微孔光学阵列长宽比对X射线聚焦性能的影响

微孔光学阵列聚焦镜头是实现X射线探测系统高探测效率、轻小型化的有效手段,近年来得到了深入研究。X射线探测系统通过测量脉冲星辐射的X射线光子的到达时间,重构脉冲轮廓来实现航天器导航。为了获得更精确的脉冲星信号,必须尽可能多地收集X射线光子,因此探测系统的聚焦性能是X射线探测系统的核心指标,也是微孔光学阵列主要的设计目标。文章根据脉冲星能谱的分布特点,分析了微孔光学阵列通道长宽比对X射线聚焦性能的影响,提出了针对不同脉冲星选取特定长宽比的方法,实现了不同的脉冲星能谱分布下最优的聚焦效率,为后续微孔光学阵列的研制和工程搭载提供了参考。基于这种方法,文章对Crab脉冲星的能谱分布进行了微孔光学阵列设计,设计结果显示,其聚焦性能得到明显提高。     

Moment-tensor inversion and decomposition for cracks in thin plates

The knowledge of crack type and dislocation orientation is helpful for the lifetime prediction of thin plates on aircrafts. The moment-tensor inversion utilizes the Acoustic Emission (AE) signals to detect cracks and the source mechanisms can be interpreted by the decomposition of moment tensors. Since the traditional moment-tensor inversion is implemented for the AE sources inside infinite elastic bodies, the inversion needs to be modified for the cracks in thin plates. In this study, the moment tensors of cracks in thin plates are derived and the inversion equation is provided based on the Green's function of second kind. A method of modifying the moment tensors to adapt to the existing decomposition processes and source-type plots is provided. By employing the Finite Element Method (FEM), the wave fields generated by the AE sources are computed. The AE sources continuously changing from pure tensile type (Model I) to shear type (Model II) are achieved in the FE models and the moment tensors are recovered. By the comparison between the reference values and recovered solutions, the source type can be accurately identified in the source-type plot and the applicability of the moment-tensor inversion for cracks in thin plates is confirmed.     

Simulation of Wave Impact on Three-Dimensional Horizontal Plate Based on SPH Method

An improved three-dimensional incompressible smooth particle hydrodynamics （ISPH） model is developed to simulate the impact of regular wave on a horizontal plate. The improvement is the employment of a corrective function to enhance angular momentum conservation in a particle-based calculation. And a new estimation method is proposed to predict the pressure on the horizontal plate. Then, the model simulates the variation characteristics of impact pressures generated by regular wave slamming. The main features of velocity field and pressure field near the plate are presented. The present numerical model can be used to study wave impact load on the horizontal plate.