两种同类型胶片基础特性及检测应用比对

文摘针对如何在液体火箭发动机产品射线检测过程中,根据具体情况选择合适的射线胶片,达到既能保证射线检测图像质量又能提高检测效率减少检测成本的目的,本文通过对进口富士IX100型胶片和国产乐凯牌L7型胶片的特性和质量稳定性进行工艺对比试验。结果表明,L7型胶片本底灰雾度稍大于IX100型胶片,灵敏度逊于IX100型胶片,宽容度高于IX100型;但两者均属于GB/T19348.1—2003规定的T3范畴胶片,综合性能比较接近;L7型胶片适用于发动机上具有变截面的铝铸件、机加余量不大的钢铸件、钛铸件及大部分熔焊缝的射线检测。     

Analysis of crack initiation location and its influencing factors of fretting fatigue in aluminum alloy components

To promote the development of fretting fatigue assessment and control technology for aircraft components, this paper uses the Crystal Plasticity Finite Element(CPFE) method and sub-modeling technology to study the Crack Initiation Location(CIL) of fretting fatigue in Aluminum Alloy(AA) specimens. The effects of external excitations such as normal load, tangential load, and axial stress on the CIL are investigated. It is found that the Most Likely Cracked(MLC) site revealed in a specimen and the ...     

不同钝化工艺SiO2薄膜的辐射缺陷

为研究不同钝化工艺栅介质用SiO₂薄膜的高能电子辐射缺陷特征，采用能量为1 MeV的高能电子在辐照注量为1×10¹⁵ e/cm²、5×10¹⁵ e/cm²和1×10¹⁶e/cm²下对三种不同钝化工艺（I，700 nm SiN + 500 nm PSG;II，1.2 μm SiN;III，700 nm PSG + 500 nm SiN）的SiO₂薄膜进行了辐照试验。拉曼光谱和X射线光电子能谱结果表明I和III钝化工艺SiO₂薄膜形成了非晶硅及双氧根离子，傅立叶红外光谱结果表明I钝化工艺SiO₂薄膜形成缺陷结构未知的A₁、A₂、B₁及B₂缺陷；II钝化工艺SiO₂薄膜形成A₁、B₁、及 缺陷；III钝化工艺SiO₂薄膜形成A₁、及B₂缺陷。     

TC4钛合金激光冲击强化数值模拟

采用连续显式动态冲击策略对航空用TC4钛合金进行激光冲击强化数值模拟研究.根据冲击波能量变化曲线确定单次冲击求解时间为3000ns,并分析了应力波传播过程.在此基础上开展多点冲击模拟,分析了功率密度、冲击次数和光斑搭接率对残余应力、应变场的影响.得出增加功率密度对增大表面残余压应力的效果更好;增加冲击次数对增大残余压应...     

基于电加热膜防冰设计方案的分流环表面换热特性试验研究

分流环表面换热特性对提升防冰设计效能至关重要。针对传统热气防冰方案中试验件与试验方案系统复杂、成本高昂等问题，本文提出了一种新型电加热膜防冰设计方案的分流环表面换热系数的试验方法。根据能量守恒定律，推导出分流环表面换热系数理论公式。试验研究了不同俯仰角、速度、液态水含量（Liqid water content,LWC）以及水滴中位体积直径（Median volumetric diameter, MVD）等对分流环表面换热特性的影响。试验结果表明：前缘区域换热系数随俯仰角先增大后降低，25°俯仰角是明显的转折点；相同喷雾条件下的前缘区域、下表面区域的平均换热系数约是干空气条件下的3倍；分流环前缘的换热系数明显大于上、下表面的换热系数。     

铝蜂窝夹层板热管区域平面度控制方法研究

主要研究蜂窝板热管区域局部平面度超差的原因及控制方法。经分析,蜂窝叠块的尺寸精度以及胶膜固化后的厚度不均匀性是导致超差的主要原因,通过提高工装均压板的厚度,利用胶膜厚度的自适应性弥补零部件尺寸累积偏差,提高平面度,并对新方法下产品剥离、剪切强度进行测试,结果表明,该工艺方法可以在不影响产品力学性能的前提下大幅改善产品热管区域平面度。     

Pressure performance for a thin-walled ring and turbulent-jet orifice modeled elastic squeeze film damper

This paper explores an analytical model for Elastic Ring Squeeze Film Damper (ERSFD) with thin-walled ring and turbulent-jet orifices, and uncovers its Oil Film Pressure Performance (OFPP). Firstly, the ring deformation is addressed by using the Fourier series expansion approach and the orifice outflow rate is characterized with the Prandtl boundary layer theory. Secondly, applying finite difference scheme, the influence of elastic ring flexibility, orifice diameter, and attitude angle on the OFPP is analyzed. Finally, Outer chamber pressure was measured experimentally at different rotor speeds. The results indicate that the outer chamber pressure coats an individual load-carrying region and spreads symmetrically pertaining to the attitude angle. Its amplitude drops as the elastic ring flexibility decreases but boosts with the reduction of the orifice diameter. For inner chamber pressure, the orifice diameter effects a similar trend to the outer cavity, but exhibits more stable distribution regarding the attitude angle. Minimizing the elastic ring flexibility causes an increase in amplitude. The model is validated by the test results giving that the outer chamber pressure shifts synchronously and periodically with the variation of the attitude angle, while the pressure amplitude increases slightly at higher rotor speeds.     

液体地膜覆盖对直播稻抵御芽期低温的效果

为水稻机械化直播推广提供技术支持,减轻长江流域春季低温对直播稻芽期的危害,本文研究了液体地膜覆盖对直播稻抵御芽期低温的效果.试验结果表明,水稻芽期液体地膜覆盖有明显的保墒增温作用,采用体积比1∶ 1稀释液体地膜覆盖,湘早籼24号和株两优2号2个水稻品种的成苗率分别比对照提高了19.25%和22.37%,降低了水稻幼苗的株高,增大了叶龄和单位苗高干质量.表明液体地膜覆盖是直播稻栽培中抵御芽期低温的一项有效技术.