Research into Configuration and Flow of Wall Oil Film in Bearing Chamber Based on Droplet Size Distribution

The lubrication design and heat transfer determination of bearing chambers in aeroengine require a sufficient understanding of the oil droplet-film interaction and physical characteristic in an oil/air two-phase flow state.The analyses of oil droplet movement,mass and momentum transfer during the impingement of droplet/wall,as well as wall oil film thickness and flow velocity are very important for the bearing chamber lubrication and heat transfer calculation.An integrated model in combination with droplet movement,droplet/wall impact and film flow analysis is put forward initially based on the consideration of droplet size distribution.The model makes a contribution to provide more practical and feasible technical approach,which is not only for the study of droplet-film interaction and physical behavior in bearing chambers with oil/air two-phase flow phenomena,but also useful for an insight into the essence of physical course through droplet movement and deposition,film formation and flow.The influences of chamber geometries and operating conditions on droplet deposition mass and momentum transfer,and wall film thickness and velocity distribution are discussed.The feasibility of the method by theoretical analysis is also verified by the existing experimental data.The current work is conducive to expose the physical behavior of wall oil film configuration and flow in bearing chamber,and also significant for bearing chamber lubrication and heat transfer study under oil/air two-phase flow conditions.     

液膜再生复合冷却中液膜传热特性

对液体火箭发动机液膜再生复合冷却进行了算法研究.综合考虑了发动机内部化学反应、蒸发、卷吸、对流、导热、辐射等因素,将冷却液膜分为显热区、潜热区及气膜区三个区域进行了计算.推导了液膜长度和厚度的计算方法,分析了液膜再生复合冷却效率及各因素对液膜传热特性的影响.计算结果表明:①液膜入口质量流量越大,液膜区长度越长,冷却效率越高,复合冷却效率可维持在0.57以上.②高温燃烧室内膜的液体段长度很短,在液膜存在区域内冷却效率高达0.9.③液膜消失后,头部冷却液膜的设计仍对室壁起了很好的冷却保护作用,低温边区一直延伸至出口.④液膜吸收的显热和液膜蒸发吸收的热量及高温燃气与膜间的对流在液膜区内起了主要作用,而卷吸造成的质量损失及传热不可忽略.      

气体润滑弹性波箔片轴承动态特性分析

通过摄动方法并结合气体润滑压力控制Reynolds方程和气膜压力、气膜厚度及箔片变形等变量的Taylor展开式,推导出弹性波箔片轴承气膜动力特性系数计算微分方程组.同时,考虑气体可压缩性等因素,建立气膜厚度、箔片变形和气膜压力三者之间关系的数学模型方程组.运用Newton-Raphson迭代法和有限差分法耦合求解气膜动...     

EXPERIMENTAL STUDY OF FLOW FIELDS IN THE VICINITY OF A FILM COOLING HOLE EXIT

Sofar,filmcoolingisextensivelyadoptedforprotectinghightemperaturepartsingasturbine.Manyresearchworksarefocusedonflow[1~3Jandheattransfer[4'5jinthedownstreamofthecircularhole,buttheflowcharacteristicsattheholeexit,especiallyforflaredholeexit,arenotreportedatpresent.Inordertodesignasuitab1eholeshapeforpracticalcoolingandprovideplentyexperimentaldataforverificationofcomputercodes,adetai1edexperimentalin-vestigationabout3-Dflowfieldsattheexitofasinglecircularandfan-shapedholehasbeencompleted.1Exp…     

薄膜材料和纤维材料的热扩散率测量

介绍了激光热波技术用于测量薄膜材料和纤维材料热扩散率的测试系统，测试温度范围为２０－５００℃。讨论了测量中的各种试验条件、基本公式和误差分析。在理论上此系统可以应用于任何厚度样品面向热扩散率的测量。     

薄膜温度传感器的研制及应用

一种新型的薄膜温度传感器,采用真空镀膜的方法制作在涡轮叶片表面,两者构成一体,可以真实反应表面温度。传感器的质量小、响应快,对叶片内部换热和表面燃气流无干扰。 传感器的敏感元件为铂姥_(10)-铂热电偶,测温上限可达1000℃,测量精度为±3％。     

谱载下裂纹扩展的计算及实验分析

本文针对裂纹扩展的Willenborg-Chang模型,提出了如何合理地选择参数,怎样对残余塑性区尺寸进行修正及随机加载谱的处理。通过实验和计算结果的对比,说明上述想法的正确性,并提出Willenborg-Chang模型更适用于较长裂纹的寿命估算。     

高硅氧增强塑料烧蚀模型中热解层厚度的探讨

通过小型实验固体火箭发动机的多次热试车,对喷管扩散段截面上高硅氧酚醛材料的色变厚度进行了观察,对该截面上材料采用红外光谱成份分析和导电性测量,确认了热解层厚度与碳化层厚度具有相同的数量级,可达2.5mm左右.因此,在作高硅氧酚醛喷管材料的烧蚀与温度场计算时,不宜采用热解面模型,而应采用热解层模型.     

气、液组合膜流对壁面冷却效果的理论及试验研究

本文针对液膜及气膜组合流动的特点,提出了组合薄膜流动的“四层式流场物理模型”.根据所做简化、假设,对液膜区流场结构及冷却效果进行了理论计算,并通过分析方法,对其紧接的气膜段流动及冷却效果进行了理论预估.试验的结果表明:液膜段的理论计算与试验数据基本相符.并从试验中发现了液膜蒸干后气膜段冷却的一些特点.这对研究液体冷却时液膜及气膜组合流动的冷却效果提出了可行的途径.     

双轴应力下含裂纹加筋曲板剩余强度的弹塑性有限元计算

 采用考虑了大应变的弹塑性有限元方法,以裂纹尖端张开角为断裂准则,实现了双向受载条件下加筋曲板中裂纹起裂到失稳整个扩展过程的数值模拟计算;还对与加筋曲板有同样尺寸的加筋平板进行了分析和计算。结果表明,所提出的分析方法和所采用的断裂准则适用于对含裂纹加筋结构所进行的剩余强度分析。