矩形截面管道气流中横向运动颗粒的碰壁条件

分析了矩形截面管道气流中横向运动颗粒的运动轨迹及碰壁条件,研究表明颗粒飞出的临界速度随着颗粒直径的增大而减小,当颗粒直径较小时受来流密度、马赫数影响较大,总趋势是来流密度、马赫数越大,颗粒越不容易与上壁面碰撞。但随着颗粒直径的增大,来流条件对颗粒是否碰壁的影响逐渐减弱,决定因素是颗粒直径的大小和颗粒的喷射速度。     

基于划分检测模型的终端区异常轨迹检测方法

针对异常轨迹对轨迹聚类效果的影响以及给进离场程序管制适用性的量化分析提供分析数据的考虑,在结合数据挖掘中异常检测理论的基础上,利用划分检测框架及将距离和密度结合起来,设计了一种有效检测算法,运用到终端区飞行轨迹的异常检测当中,检测出飞行轨迹中的异常轨迹,从而改善轨迹的聚类效果。实例仿真结果表明：方法可以准确地检测出异常轨迹。     

The role of AVDR in linear cascade testing

Linear cascade testing plays an important role in the research and development of turbomachinery and is widely used over the world.The ideal cascade model of a turbomachinery blade row is two-dimensional.In actual linear cascade testing, the flow through the test section converges due to the development of the boundary layer and secondary flow along the sidewall surfaces of the test section.Axial velocity density ratio(AVDR) is adopted to account for the deviation of the tested cascade flow from the ideal 2D model.Among numerous published cascade works, the influence of AVDR on cascade performance is seen to be complicated with many affecting factors, such as those related to cascade/blade geometry and flow conditions.Also, controlling AVDR is limited by the facility capability.Furthermore, real blade-to-blade flow in turbomachines is usually associated with AVDR greater than unity due to limited span of blades between the hub and shroud such that cascade testing without reducing AVDR could be favored sometimes.All these facets add complexity and diversification to the matter.The current paper reviews previous studies and results on AVDR.Consolidated understanding on the role of AVDR and recommendations on how to deal with it in linear cascade testing are provided.      

某类跨大气层飞行器全航程红外辐射特性分析

针对某类跨大气层飞行器飞行过程中需要进出大气层,且飞行速度跨度大等特点,建立了不同空域、不同飞行速度下的机体头部受热模型。当在大气层内飞行时分别使用经验公式和Lees公式计算马赫数小于5和大于5时头部受热情况,当在大气层外飞行时建立了考虑太阳直射、地球反照和地球红外加热情况下的受热模型。利用普朗克定律得到了相同温度下不同波段的红外辐射能量占比情况。最后利用本方法对某类跨大气层飞行器进行了温度和红外辐射计算,得到的计算结果能够大致反映全航程头部温度和红外辐射变化情况。     

模型烧蚀对尾迹电子特性影响的计算和实验研究

 基于气动物理研究的需要,针对高焓风洞的来流特点,采用计算和实验相结合的方法研究聚丙烯烧蚀对尾迹电子密度的影响。结果表明：计算结果可以有效模拟实验状态,电子密度的模拟精度有很大提高,误差在一个量级内;聚丙烯烧蚀可以降低尾迹的电子密度,但幅度不大,在2倍左右,其与选择模型材料的催化特性降低幅度相当;对电弧风洞的成功改进和非稀薄流静电探针诊断技术的应用,是尾迹电子密度测试的前提保障。     

基于发射光谱法的螺旋波电推进器等离子体源放电实验研究

为探究不同气体条件下螺旋波电推进器等离子体源的放电特征,开展了氩气、氦气和氮气放电的光谱诊断实验研究。氩气和氦气为工质气体的放电条件下,部分波长谱线相对强度随功率的增加而增强,且斜率出现两次跳变,考虑是螺旋波放电过程中的模式转换,即容性向感性、感性向波模式的转换。三种工质气体,在较低的压强下,各谱线强度均随压强增大而迅速增强,但氩气放电下压强继续增大达到1.0Pa以后,谱线强度增强趋势变缓甚至达到“饱和”状态,而氦气和氮气放电下压强增大到0.5~0.65Pa,谱线强度出现降低趋势,氦气和氮气放电强度对压强更为敏感。     

Study of maximum electron density NmF2 at Karachi and Islamabad during solar minimum (1996) and solar maximum (2000) and its comparison with IRI

The monthly hourly medians of maximum electron density, N_mF₂, at two Pakistani ionospheric stations, Karachi and Islamabad, have been determined for solar minimum (1996) and solar maximum (2000) and compared with IRI predictions using the URSI coefficients. At night and pre-noon period the N_mF₂ values at both stations are almost equal during the 2 years. However, at post-noon the values at Karachi are considerably larger than those at Islamabad due to the equatorial or geomagnetic anomaly. Karachi (geomag. coord. 16.44°N, 139.08°E) lies near the region of the equatorial anomaly (+20 and −20 geomagnetic latitude), so most of the N_mF₂ values at Karachi are larger than those at Islamabad (geomag. coord. 24.46°N, 145.67°E). The maximum monthly values of N_mF₂ show a semi-annual variation at Karachi and Islamabad both during 1996 and 2000 as predicted by IRI.     

微纳InSAR卫星总体技术研究

微纳合成孔径雷达干涉(Synthetic Aperture Radar Interferometry, InSAR)卫星是对地定量化遥感的重要手段。开展了微纳InSAR卫星系统总体技术研究,给出了使得干涉测量覆盖范围最大的双星编队构型设计方法,建立了低燃料消耗双星轨道参数设计准则,提出高功能密度比InSAR卫星系统的设计方法,包括载荷平台一体化、卫星高集成模块化等总体设计方法,并给出了相应的设计实例。     

He-like Ar xvii triplet observed by RESIK

We present the observations of He-like Ar triplet lines obtained by RESIK spectrometer aboard CORONAS-F. Interpretation of intensity ratios between triplet lines of lower Z elements is known to provide useful diagnostics of plasma conditions within the emitting source. Here, we investigate whether triplet line ratios are useful for interpretation of higher Z element spectra. A high sensitivity, low background and precise absolute calibration of RESIK allow to consider in addition also the continuum contribution. This provides a way to determine the Ar absolute abundance from the observed triplet component ratios. The method is presented and the results are shown for two selected flares. Derived values of Ar absolute abundance for these flares are found to be similar: 2.6 × 10⁻⁶ and 2.9 × 10⁻⁶. They fall in the range between presently accepted Ar photospheric and coronal abundances.     

GNSS Satellite Autonomous Integrity Monitoring (SAIM) using inter-satellite measurements

Integrity is the ability of Global Navigation Satellite Systems (GNSS) to detect faults in measurements and provide timely warnings to users and operators when the navigation system cannot meet the defined performance standards, which is of great importance for safety of life critical applications. Compared with both Receiver Autonomous Integrity Monitoring (RAIM) and ground based GNSS Integrity Channel (GIC) methods which are widely adopted nowadays, the Satellite Autonomous Integrity Monitoring (SAIM) method can be used to monitor orbit/ephemeris and clock errors, and has advantages in monitoring orbit and clock quality and providing instantaneous responses when faults happen.