Kinetic theory of the current sheath. II. Effect of polarization on the stability of a current sheath

A procedure for investigating the stability of a current sheath, taking into account the effect of plasma polarization, is offered. The kinetic equation with a self-consistent electromagnetic field for perturbation of the distribution function is solved. On the basis of this solution, the tensor of dielectric permeability for a non-electroneutral current sheath plasma is calculated, and the dispersion equation for the study of possible instability modes of this current sheath is obtained. The instability of the current sheath of the magnetospheric tail with respect to tearing perturbations, and the influence of the effect of plasma polarization on the development of tearing instability, are investigated.     

Study of the 28 October 2003 and 20 January 2005 solar flares by means of 2.223 MeV gamma-emission line

By the data on intensity-time profiles of the neutron capture line of 2.223 MeV we have studied some characteristics of two solar flares, 28 October 2003 and 20 January 2005 (INTEGRAL and CORONAS-F observations, respectively). The SINP code was applied making allowance for the main processes of neutron interactions and deceleration in the solar plasma, character of neutron source, losses of neutrons and density model of the solar atmosphere. Comparison of the computed time profiles of 2.223 MeV line with observed ones for the flare of 28 October 2003 confirms the results obtained earlier for three other flares. Namely, the effect of density enhancement (EDE) in the sub-flare region, as well as the variations (hardening) of accelerated particle spectrum in the course of the event have been confirmed. The usual modeling procedure by the SINP code, however, seems to be inapplicable to the event of 20 January 2005. Possible causes of density enhancements during some flares and peculiarities of the 20 January 2005 flare are discussed.     

Effects of Hybrid Voltages on Oxide Formation on 6061 Al-alloys During Plasma Electrolytic Oxidation

Plasma electrolytic oxidation (PEO) is carried out on 6061 Al-alloys in a weak alkaline electrolyte containing NaOH, Na₂SiO₃ and NaCl. Centered on the correlation of composition and structure, analyses by means of X-ray diffration (XRD), scanning electron microscope (SEM) and energy dispersive spectrometry (EDS) are conducted on the specimens, which have been PEO-treated under hybrid voltages of different direct current (DC) values (140-280 V) with constant alternate current (AC) amplitude (200 V). Attention is paid to the composition, properties and growth mechanism of oxide layers formed with hybrid voltages. Moreover, the main effects of DC value are discussed. Ceramic layers with a double-layer structure which combines hard outer and soft inner layers are found to be consist of α-Al₂O₃, γ-Al₂O₃ and mullite. With the DC values increasing, the growth of the ceramic layers tends to have increasingly obvious three-stage feature.     

Interplanetary medium – A dusty plasma

The average mass of dust per volume in space equals that of the solar wind so that the interplanetary medium should provide an obvious region to study dust plasma interactions. While dust collective behavior is typically not observed in the interplanetary medium, the dust component rather consists of isolated grains screened by and interacting with the plasma. Space measurements have revealed several phenomena possibly resulting from dust plasma interactions, but most of the dust plasma interactions are at present not quantified. Examples are the production of neutrals and pick-up ions from the dust, dust impact generated field variations at spacecraft and magnetic field variations possibly caused by solar wind interacting with dust trails. Since dust particles carry a surface charge, they are exposed to the Lorentz force in the interplanetary magnetic field and for grains of sub-micrometer sizes acceleration can be substantial.     

L׳ADROIT – A spaceborne ultraviolet laser system for space debris clearing

Small (1–10 cm) debris in low Earth orbit (LEO) are extremely dangerous, because they spread the breakup cascade. Pulsed laser active debris removal using laser ablation jets on target is the most cost-effective way to re-enter the small debris. No other solutions address the whole problem of large (~100 cm, 1 t) as well as small debris. Physical removal of small debris (by nets, tethers and so on) is uneconomical because of the energy cost of matching orbits. In this paper, we present a completely new proposal relative to our earlier work. This new approach uses rapid, head-on interaction in 10–40 s rather than 4 minutes, using 20–40 kW bursts of 100 ps, 355 nm UV pulses from a 1.5 m diameter aperture on a space-based station in LEO. The station employs “heat-capacity” laser mode with low duty cycle to create an adaptable, robust, dual-mode system which can lower or raise large derelict objects into less dangerous orbits, as well as clear out the small debris in a 400-km thick LEO band. Time-average laser optical power is less than 15 kW. The combination of short pulses and UV wavelength gives lower required fluence on target as well as higher momentum coupling coefficient. An orbiting system can have short range because of high interaction rate deriving from its velocity through the debris field. This leads to much smaller mirrors and lower average power than the ground-based systems we have considered previously. Our system also permits strong defense of specific assets. Analysis gives an estimated cost less than $1 k each to re-enter most small debris in a few months, and about 280 k$ each to raise or lower 1-ton objects by 40 km. We believe it can do this for 2000 such large objects in about four years. Laser ablation is one of the few interactions in nature that propel a distant object without any significant reaction on the source.     

Possible evidence for small-scale wave seeding of equatorial plasma bubbles

The small-scale wave-like structure (SSWS) of F region bottomside plasma density was proposed to be an important seeding for equatorial plasma bubble (EPB) generation, and employed in theoretical simulations of EPBs in recent years. The seeding role of SSWS, however, is waiting to be demonstrated by observation. Here we present two cases of SSWS and EPB observed by the Fuke all-sky airglow imager (19.3°N, 109.1°E; dip latitude 14.3°N). For each case, the results show that two large-scale wave-like structures (LSWSs) initially appeared around sunset in the longitude regions separated by 3–4°, but EPB irregularities were only generated in one of the LSWSs where SSWSs were seen riding on LSWS. For the other LSWS, no SSWS and EPB irregularities were seen. Considering that the two LSWSs were situated closely in longitude where the amplitude of pre-reversal enhancement of background eastward electric field should be similar, the observation that EPB was only generated in the longitude with simultaneous LSWS and SSWS could provide supporting evidence for SSWS seeding of EPB.     

Comparison of Polar and Equatorial Coronal Holes Observed by UVCS/SOHO: Geometry and Physical Properties

We analyzed UVCS/SOHO data and compared the H I Lyα (121.6 nm) and O VI (103.2 nm, 103.7 nm) emission in the polar and equatorial coronal holes. We found that the emission lines have similar characteristics in these two types of coronal holes. Both types show evidence for superradially diverging boundaries. The latitudinal distribution of the O VI line ratio may indicate that the equatorial coronal hole has O⁺⁵ outflow velocities lower than in the polar coronal holes. This revised version was published online in June 2006 with corrections to the Cover Date.     

高阶矩谱分析与空间等离子体非线性相互作用识别

利用高阶矩统计分析方法对ＡＵＲＥＯＬ－３卫星观测数据进行分析处理，所涉及的信号分别为ＥＬＦ频率范围内的电场扰动Ｅｈ（ｔ）和等离子体密度波动δＮｅ／ｎｅ（ｔ），处理结果表明：利用高阶矩谱分析方法可以很好地识别空间等离了波－粒相互作用过程中的非线性成分     

用于合成金刚石薄膜的微波等离子体CVD系统

研制了一套功率容量大、结构合理、工作稳定的微波等离子体ＣＶＤ系统。描述了系统的基本结构和性能，讨论了它的特点。作者利用该系统，在单晶Ｓｉ等衬底材料上成功地合成了金刚石薄膜。