NS-DBD激励控制非细长三角翼前缘涡仿真研究

通过在三角翼前缘施加纳秒脉冲介质阻挡放电（NS-DBD）激励唯象学模型,进行了47°后掠角钝前缘三角翼流动控制的仿真。分析了不同迎角下升力和阻力系数的变化、流场结构的变化、以及激励诱导旋涡的演化过程。研究表明:施加无量纲激励频率F+=1.44的NS-DBD激励后,可明显提高三角翼失速前后的升力系数;同时阻力系数也有所增加,变化趋势与实验结果一致。激励在前缘分离剪切层处诱导产生流向涡,改变了前缘剪切层结构,使其向内卷吸;激励后时均流场形成了明显的负压峰值,前缘涡附着线外移,吸力面回流区减小。      

减压直流等离子体射流电子温度的双静电探针测量

建立了一套双静电探针诊断系统,用于检测在气流量为4.2 slm、弧电流为80 A、真空室压力为165Pa的条件下纯氩直流非转移弧等离子体射流的电子温度及其分布。结果表明:发生器出口处射流中心的电子温度约为14 500 K,射流中电子温度随离开发生器出口的轴向或径向距离的增加而单调降低;径向电子温度梯度约为263 K/mm,轴向电子温度梯度为69 K/mm;射流中电子温度随弧电流增加而单调上升。     

水工质微波加热推力器的击穿点火与离解损失估算

对水工质微波等离子推力器(MPT),用微波击穿气体放电产生等离子体的条件,数值估算了其点火的可行性;通过化学动力学计算证明了水工质MPT中离解损失的存在,并初步估算了理解损失的大小。结果表明,在1 kW的输入功率下水工质MPT的点火启动并不特别困难,从点火到稳定工作,能量吸收从场致电离、碰撞电离转变为热电离、碰撞电离和场致电离;水在MPT工作过程中会发生离解,离解损失在各类能量损失中所占的比重较大。     

热处理对纳米氧化锆热障涂层热物性的影响

采用大气等离子喷涂(APS)在GH33基体上制备了氧化锆纳米结构涂层,运用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电镜(TEM)和拉曼光谱(RS)等分析手段对原料粉末和涂层的显微结构、相组成进行了观察和确定,分别利用激光脉冲技术测量了热处理前后涂层的热扩散率.实验结果表明,等离子喷涂氧化锆纳米涂层颗粒分布在65~110nm之间,大于原料粉末的40~70nm,涂层主要由亚稳四方相氧化锆组成.1050℃下热处理34h后,涂层的热扩散率从制备态的2.15×10-3~2.75×10-3cm2/s升高到2.65×10-3~3.25×10-3cm2/s.      

面向立方星变轨任务的机动控制策略

为了实现立方星在轨飞行与变轨,基于模块化推进器系统提出混合控制策略实现微小卫星轨道持续变化任务需求。首先,针对多单元立方星单一主推进器的结构部署,基于高斯变分方程采用连续低推进力实现轨道机动变化。为了实现对立方星主推进器的指向调整,基于姿态动力学模型利用PD连续姿态控制求得所需扭矩,实现对立方星的指向角和指向角速度调节。针对配置的微脉冲等离子推进器(μ-PPT)不连续的特点,通过搜寻μ PPT最优脉冲序列组合获得实际扭矩,满足对外部干扰的持续补偿以及立方星的姿态稳定和指向调整操作需求。此外,引入姿态误差敏感度阈值,使姿态控制器在能够提高系统鲁棒性的同时减少μ-PPT消耗。最后,通过对3U立方星在轨飞行与变轨的具体案例分析,表明所提出的基于微推进器系统的混合控制策略能够实现立方星轨道机动变化需求。     

Possible evidence for small-scale wave seeding of equatorial plasma bubbles

The small-scale wave-like structure (SSWS) of F region bottomside plasma density was proposed to be an important seeding for equatorial plasma bubble (EPB) generation, and employed in theoretical simulations of EPBs in recent years. The seeding role of SSWS, however, is waiting to be demonstrated by observation. Here we present two cases of SSWS and EPB observed by the Fuke all-sky airglow imager (19.3°N, 109.1°E; dip latitude 14.3°N). For each case, the results show that two large-scale wave-like structures (LSWSs) initially appeared around sunset in the longitude regions separated by 3–4°, but EPB irregularities were only generated in one of the LSWSs where SSWSs were seen riding on LSWS. For the other LSWS, no SSWS and EPB irregularities were seen. Considering that the two LSWSs were situated closely in longitude where the amplitude of pre-reversal enhancement of background eastward electric field should be similar, the observation that EPB was only generated in the longitude with simultaneous LSWS and SSWS could provide supporting evidence for SSWS seeding of EPB.     

天基朗缪尔探针传感器设计与仿真

朗缪尔探针是进行空间等离子体电子密度和温度就位测量的重要仪器, 在电离层卫星探测和火箭探测中应用十分广泛. 传感器设计的合理与否是影响朗缪尔探针探测结果的关键因素之一. 朗缪尔探针传感器的结构本身比较简单, 但传感器的设计要受到多种物理条件及工程条件的限制, 其中, 有些限制条件相互制约甚至相互矛盾, 必须综合进行考虑. 从传感器形状、大小和表面材料的选取三个方面分析了朗缪尔探针的各种限制条件, 给出了一种原型朗缪尔探针的设计, 并通过仿真计算验证了该设计.     

Plasma Niobium Surface Alloying of Pure Titanium and its Oxidation at 900℃

A niobium-modified layer on pure titanium surface was obtained by means of double glow plasma surface alloying technique. The modified layer was uniform, continuous, compact and well adhered to the substrate. The niobium composition in the modified layer decreased gradually from the surface to the substrate. The oxidation behavior of the niobium-modified layer was investigated and com- pared with the untreated surface at 900 ℃ for 100 h. Characterization of the layers was performed using X-ray diffraction and scanning electron microscope, respectively. The test results show that the oxidation behavior of pure titanium was improved by niobium alloying process. Niobium has a positive influence on the oxidation resistance.     

Ti2AlNb合金双层辉光等离子表面渗钼的扩散行为研究

Ti2AlNb合金(O相)具有高的比强度、断裂韧性以及优良的抗蠕变性能,因而在航空制造中成为一种颇具吸引力的高温结构材料.但是,较差的耐磨性是其主要的缺陷并限制其实际应用.为解决这一问题,对Ti2AlNb合金进行双层辉光等离子表面渗Mo.探讨主要工艺参数对Mo的扩散行为的影响.采用扫描电镜(SEM)、X射线衍射(XRD)和辉光放电光谱仪(GDS)分析表面合金化层的成分分布和微观结构.测定从表面到中心的显微硬度变化曲线.结果表明温度与时间均对扩散过程具有显著的影响.最后通过回归分析计算出在优化的工艺温度980℃下的扩散系数.