导弹随机飞行仿真的建模研究

本文研究了导弹的六自由度（６ＤＯＦ）空间运动制导系统的基本特性，建立了导弹随机飞行模块化数字仿真结构。在随机干扰作用下，应用协方差分析描述函数技术（ＣＡＤＥＴ），分析弹着点的散布，获得了较满意的结果。文中主要讲述了方波控制的导弹的有关问题，但所给方法对其它类型的导弹也是同样适用的。     

离散事件动态系统的GSMP模型及扰动分析

对离散事件动态系统（ＤＥＤＳ）的仿真过程建立了包含中断事件集和驱动事件集的广义半马尔可夫过程（ＧＳＭＰ）模型，对参数的无穷小扰动所引起的系统状态转移时刻进行了扰动分析，最后，讨论了扰动分析所需要的可变换条件和样本性能函数的关系，并提出值得进一步研究的问题。     

多协议多用户GPS/GSM监控系统网关的设计与实现

在多协议、多用户GPS(Global Position System)/GSM(Global System for Mobile communications)监控系统中,网关的设计对系统的性能、可用性和可扩展性有重要作用.讨论了在网关设计中需要注意的几个关键问题:通过分析不同短消息服务器的接口协议,提出使用协议管理器实现多协议接入;给出了与用户系统的通信指令格式,并分析了地址的转换流程.最后剖析了用多线程方式和消息驱动实现这种系统的优点,并给出了一个具体实现的消息循环流程.实践证明这种设计是可靠高效的.     

离散系统仿真输出数据的统计分析

概括了分析仿真产生的数据的方法，讨论了离散系统仿真输出分析的目的以及应用统计方法的要求，对单变量情形，给出了有关估计来自终态仿真和和稳态仿真参数的技术。对多变量情形，以终态仿真为例，给出了用于分析离散系统的仿真输出的某些多变量统计技术，并提出均值向量的估计方法。     

风挡防冰表面温度场计算

在研究国内外有关资料的基础上，采用了量纲分析的方法，建立了风挡外表面温度场的计算模型。回避了对自由流与射流相互干扰这一复杂问题的研究，同时对该计算模型进行了验证，并开发了相应的计算程序。该问题的解决，填补了国内在该领域中的空白。     

柔性环境中的多目标决策及应用

提出了解决柔性环境中的多目标决策的一种人机交互式方法，该方法包括两个层次：（１）运用ｍａｘｉｍｉｎ方法进行优化；（２）根据决策者的愿望调整参数，再回到（１）。在计算机上实现了以上方法，并将该方法应用于修水县的扶贫规划。     

随机控制与输出反馈控制的最优协调性合成

应用双控制器的最优协调性合成设计方法，在离散时间域内研究了随机控制作用和输出反馈控制作用的合成设计问题，构造了一个数值迭代计算方案来求解相应的控制规律，然后，通过设计实例验证了设计方法的有效性，并进行了有意义的对比分析。     

开关磁阻调速电动机的运行控制

 开关磁阻调速电动机（SRD）是由双凸极型磁阻电动机、功率逆变器、转子位置检测器、定子绕组电流检测器以及运行控制器等部件组成的系统。它可以看作是大步距角、带位置闭环控制的步进电机的一种发展。 SRD结构如图1（α）所示。为避免磁拉力,定、转子齿数均为偶数。在各定子齿上设有集中绕组,正对两齿上的绕组联成一相。考虑电机出力,结构合理及定子绕组供电频率等因素,一般采用定子齿数比转子齿数多2个的结构。图中是所研制的定子8齿、转子6齿的样机结构（简称为8/6结构）。图1（b）为功率逆变电路。其中C_s为直流电源,T₁～T₄为四相绕组主开关,D₁～D₄为相应的续流二极管。     

Magnetosphere Imaging Instrument (MIMI) on the Cassini Mission to Saturn/Titan

The magnetospheric imaging instrument (MIMI) is a neutral and charged particle detection system on the Cassini orbiter spacecraft designed to perform both global imaging and in-situ measurements to study the overall configuration and dynamics of Saturn’s magnetosphere and its interactions with the solar wind, Saturn’s atmosphere, Titan, and the icy satellites. The processes responsible for Saturn’s aurora will be investigated; a search will be performed for substorms at Saturn; and the origins of magnetospheric hot plasmas will be determined. Further, the Jovian magnetosphere and Io torus will be imaged during Jupiter flyby. The investigative approach is twofold. (1) Perform remote sensing of the magnetospheric energetic (E > 7 keV) ion plasmas by detecting and imaging charge-exchange neutrals, created when magnetospheric ions capture electrons from ambient neutral gas. Such escaping neutrals were detected by the Voyager l spacecraft outside Saturn’s magnetosphere and can be used like photons to form images of the emitting regions, as has been demonstrated at Earth. (2) Determine through in-situ measurements the 3-D particle distribution functions including ion composition and charge states (E > 3 keV/e). The combination of in-situ measurements with global images, together with analysis and interpretation techniques that include direct “forward modeling’’ and deconvolution by tomography, is expected to yield a global assessment of magnetospheric structure and dynamics, including (a) magnetospheric ring currents and hot plasma populations, (b) magnetic field distortions, (c) electric field configuration, (d) particle injection boundaries associated with magnetic storms and substorms, and (e) the connection of the magnetosphere to ionospheric altitudes. Titan and its torus will stand out in energetic neutral images throughout the Cassini orbit, and thus serve as a continuous remote probe of ion flux variations near 20R _S (e.g., magnetopause crossings and substorm plasma injections). The Titan exosphere and its cometary interaction with magnetospheric plasmas will be imaged in detail on each flyby. The three principal sensors of MIMI consists of an ion and neutral camera (INCA), a charge–energy–mass-spectrometer (CHEMS) essentially identical to our instrument flown on the ISTP/Geotail spacecraft, and the low energy magnetospheric measurements system (LEMMS), an advanced design of one of our sensors flown on the Galileo spacecraft. The INCA head is a large geometry factor (G ∼ 2.4 cm² sr) foil time-of-flight (TOF) camera that separately registers the incident direction of either energetic neutral atoms (ENA) or ion species (≥5^∘ full width half maximum) over the range 7 keV/nuc < E < 3 MeV/nuc. CHEMS uses electrostatic deflection, TOF, and energy measurement to determine ion energy, charge state, mass, and 3-D anisotropy in the range 3 ≤ E ≤ 220 keV/e with good (∼0.05 cm² sr) sensitivity. LEMMS is a two-ended telescope that measures ions in the range 0.03 ≤ E ≤ 18 MeV and electrons 0.015 ≤ E≤ 0.884 MeV in the forward direction (G ∼ 0.02 cm² sr), while high energy electrons (0.1–5 MeV) and ions (1.6–160 MeV) are measured from the back direction (G ∼ 0.4 cm² sr). The latter are relevant to inner magnetosphere studies of diffusion processes and satellite microsignatures as well as cosmic ray albedo neutron decay (CRAND). Our analyses of Voyager energetic neutral particle and Lyman-α measurements show that INCA will provide statistically significant global magnetospheric images from a distance of ∼60 R _S every 2–3 h (every ∼10 min from ∼20 R _S). Moreover, during Titan flybys, INCA will provide images of the interaction of the Titan exosphere with the Saturn magnetosphere every 1.5 min. Time resolution for charged particle measurements can be < 0.1 s, which is more than adequate for microsignature studies. Data obtained during Venus-2 flyby and Earth swingby in June and August 1999, respectively, and Jupiter flyby in December 2000 to January 2001 show that the instrument is performing well, has made important and heretofore unobtainable measurements in interplanetary space at Jupiter, and will likely obtain high-quality data throughout each orbit of the Cassini mission at Saturn. Sample data from each of the three sensors during the August 18 Earth swingby are shown, including the first ENA image of part of the ring current obtained by an instrument specifically designed for this purpose. Similarily, measurements in cis-Jovian space include the first detailed charge state determination of Iogenic ions and several ENA images of that planet’s magnetosphere.This revised version was published online in July 2005 with a corrected cover date.     

MATLAB电力系统模块中频谱分析的实现

给出了利用电力系统模块(PSB)工具箱对仿真波形进行频谱分析的一种新方法.该方法以MATLAB提供的PSBFFT_SCOPE函数为基础,对其输入变量加以改造,克服了其不能应用于变步长算法模型频谱分析的缺陷,拓宽了在PSB工具箱中进行频谱分析的范围.实际仿真结果表明,该方法分析正确,使用简捷,在实际仿真过程中是切实可行的.