平流层飞艇三叶螺旋桨结构优化方法

为实现螺旋桨轻质量和高固有频率之间的权衡设计，发展了1种桨叶对称削层结构的分区优化方法。为拓宽其高效率的速度和高度范围，应采用变桨距技术，需要设计圆柱形桨叶根部。该桨叶与不同桨距角的桨毂组合装配，可实现人工变桨距，在地面试验中达到高空转速。该螺旋桨采用组合分体式桨毂布局、桨叶内部填充泡沫和碳纤维混合结构，基于NSGA-Ⅱ（non-dominated sorting genetic algorithm），完成了支座固支的桨叶铺层参数优化，得到桨叶质量和频率的Pareto解集，在±10%频率安全裕度外选取最优铺层方案，并与实物测试值对比，结果表明：桨叶质量相对误差2.09%；支座固支的单桨叶频率相对误差9.30%；桨毂固支的组合体频率相对误差2.76%，避开了工作转速共振区间，证明该结构优化方法是合理有效的。     

太极二号卫星精密热控关键技术及试验验证

针对引力波探测太极二号卫星提出的高稳定度温控需求，开展了高分辨率测温系统和高稳定度热控技术的研究，提出了多级阻尼的热控设计方法，建立了多级阻尼状态空间数学模型，揭示了系统中热量传递特性。该方法在太极二号核心载荷上进行了地面试验验证，试验结果表明核心舱关键仪器的温度满足指标要求。试验结果的噪声分析，不仅验证了精密热控关键技术，而且提出了关于热噪声分析与抑制的新方法，为后续航天器精密热控技术提供了理论分析方法和工程参考依据。     

Guided wave propagation analysis in stiffened panel using time-domain spectral finite element method

Stiffened panels have been widely utilized in fuselages and wings as critical load-bearing components. These structures are prone to be damaged under long-term and extreme loads, and their health monitoring has been a common concern. The guided wave-based monitoring method is regarded as an efficient approach to detect the damage in stiffened plates because of its wide monitoring range and high sensitivity to micro-damage. Efficient simulation of wave propagation can theoretically demonstrate the detection mechanism of the method. In this study, a Time-Domain Spectral Finite Element Method (TD-SFEM) is adopted to study the wavefield in stiffened plates, where continuous Absorbing Layers with Increasing Damping (ALID) strategy is proposed to circumvent the disturbance of reflected waves on boundaries. After the convergence analysis, the developed TD-SFEM with ALID is validated by the finite element method first. Then, wave scattering and the influence of the stiffener are investigated in detail by comparing the results with the non-stiffened structure. Finally, the effects of the parameters of the stiffener, such as the height and width, on wave propagation are studied, respectively. The results illustrate that the proposed TD-SFEM with ALID is an efficient approach to study the wave propagation in the stiffened plate and can reveal the mechanism of influence of the stiffener. It is found that the height of the stiffener changes the interference of wavefield in the plate, while the effects of the width are mainly in wave scattering and mode conversion.     

QD128燃气轮机动力涡轮防振设计

分析了可能引起QD12 8燃气轮机动力涡轮振动超限的各种因素 ,着重阐述了设计中采用的各项相应的防振措施 ,简要介绍了整机试车时动力涡轮的振动情况